/*************************************************************

  This example shows how value can be pushed from Arduino to
  the Blynk App.

  NOTE:
  BlynkTimer provides SimpleTimer functionality:
    http://playground.arduino.cc/Code/SimpleTimer

  App dashboard setup:
    Value Display widget attached to Virtual Pin V5
 *************************************************************/

/* Fill-in information from Blynk Device Info here */
#define BLYNK_TEMPLATE_ID           "TMPL6sSTSU4i5"
#define BLYNK_TEMPLATE_NAME         "Home Automation System"
#define BLYNK_AUTH_TOKEN            "AWqFckllrZYAx4vgFjEW3oefqi212ERs"

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT Serial


#include <WiFi.h>
#include <WiFiClient.h>
#include <BlynkSimpleEsp32_SSL.h>
#include <DHT.h>
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>
LiquidCrystal_I2C lcd(0x27,16,2);
const int LDR_PIN =35;
const int LED2 =26;
const int relayPin =32;
const int relayPin1 =33;

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "Wokwi-GUEST";
char pass[] = "";

#define DHTPIN 15
#define DHTTYPE DHT22 // DHT 22
DHT dht(DHTPIN, DHTTYPE);
BlynkTimer timer;

// This function sends Arduino's up time every second to Virtual Pin (5).
// In the app, Widget's reading frequency should be set to PUSH. This means
// that you define how often to send data to Blynk App.
void myTimerEvent()
{
  // You can send any value at any time.
  // Please don't send more that 10 values per second.
  Blynk.virtualWrite(V6, millis() / 1000);
  
  int potValue = analogRead(34);
  Blynk.virtualWrite(V2, potValue);

}
void sendSensor()
{
  float h = dht.readHumidity();
  float t = dht.readTemperature(); // or dht.readTemperature(true) for Fahrenheit

  if (isnan(h) || isnan(t)) {
    Serial.println("Failed to read from DHT sensor!");
    return;
  }
  Blynk.virtualWrite(V1, h);
  Blynk.virtualWrite(V0, t);


}
BLYNK_WRITE(V3)
{
  int pinValue = param.asInt(); // assigning incoming value from pin V1 to a variable
  // You can also use:
  // String i = param.asStr();
  // double d = param.asDouble();
  Serial.print("V3 Motor status: ");
  Serial.println(pinValue);
  digitalWrite(2, pinValue);
 
  if (pinValue= 0)
{
    digitalWrite(relayPin1,LOW);
    delay(500);
  }
else if(pinValue= 1)
  {
    digitalWrite(relayPin1,HIGH);
    delay(500);
  }
}


void setup()
{
  // Debug console
  Serial.begin(115200);
  pinMode(2, OUTPUT);
  pinMode(34, INPUT);

  Serial.begin(115200);
  Wire.begin(23, 22);
  lcd.init();
  lcd.backlight();

  pinMode(LDR_PIN,INPUT);
  pinMode(LED2,OUTPUT);
  pinMode(relayPin, OUTPUT);
  pinMode(relayPin1, OUTPUT);


  
  Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass);
  // You can also specify server:
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, "blynk.cloud", 443);
  //Blynk.begin(BLYNK_AUTH_TOKEN, ssid, pass, IPAddress(192,168,1,100), 8443);

    dht.begin();
    Wire.begin();

  // Setup a function to be called every second
  timer.setInterval(1000L, sendSensor);
  timer.setInterval(1000L, myTimerEvent);
}

void loop()
{

  int16_t i = analogRead(34);
  String msg = i < 2165 ? "WET" : i > 3135 ? "DRY" : "OK";
  lcd.clear();
  lcd.setCursor(0,0);
  lcd.print("Soil: ");
  lcd.print(msg);
  delay(500); 

  if (i< 3135)
{
    digitalWrite(relayPin1,LOW);
    delay(500);
  }
else if(i>2500)
  {
    digitalWrite(relayPin1,HIGH);
    delay(500);
  }
  
  int sensorValue=analogRead(LDR_PIN);  // Read the LDR value (0-4095)
  int brightness =map(sensorValue,0,4095,0,255);// Map to LED brightness (0-255)

  if (sensorValue<1000)

  {
    digitalWrite(relayPin,LOW);
    delay(500);
  }

  else if(sensorValue>2000)
  {
    digitalWrite(relayPin,HIGH);
    delay(500);
  }

  Blynk.run();
  timer.run(); // Initiates BlynkTimer
}