//
//    FILE: ADS_read.ino
//  AUTHOR: Rob.Tillaart
// PURPOSE: read analog inputs - straightforward.
//     URL: https://github.com/RobTillaart/ADS1X15

//  test
//  connect 1 potmeter per port.
//
//  GND ---[   x   ]------ 5V
//             |
//
//  measure at x (connect to AIN0).


#include <ADS1X15.h>

ADS1115 ADS(0x48);


void setup() 
{
  Serial.begin(115200);
  Serial.println(__FILE__);
  Serial.print("ADS1X15_LIB_VERSION: ");
  Serial.println(ADS1X15_LIB_VERSION);

  Wire.begin();
  ADS.begin();
}


void loop() 
{
  ADS.setGain(0);

  int16_t val_0 = ADS.readADC(0);  
  int16_t val_1 = ADS.readADC(1);  
  int16_t val_2 = ADS.readADC(2);  
  int16_t val_3 = ADS.readADC(3);  

  float f = ADS.toVoltage(1);  //  voltage factor

  Serial.print("\tAnalog0: "); Serial.print(val_0); Serial.print('\t'); Serial.println(val_0 * f, 3);
  Serial.print("\tAnalog1: "); Serial.print(val_1); Serial.print('\t'); Serial.println(val_1 * f, 3);
  Serial.print("\tAnalog2: "); Serial.print(val_2); Serial.print('\t'); Serial.println(val_2 * f, 3);
  Serial.print("\tAnalog3: "); Serial.print(val_3); Serial.print('\t'); Serial.println(val_3 * f, 3);
  Serial.println();

  delay(1000);
}


//  -- END OF FILE --