#include <DHTesp.h>
DHTesp sensor;
TempAndHumidity data;
int pin=12;
int trig = 13;
int echo = 14;
long distance , duration;





void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  sensor.setup(pin,DHTesp::DHT22);
  pinMode(13, OUTPUT);
  pinMode(14, INPUT);   
}

void loop() {
  data=sensor.getTempAndHumidity();
  Serial.println(String(data.temperature)+" This is Temprature");
  Serial.println("");
  Serial.println(String(data.humidity)+" This is Humidity");
  delay(2000);
  digitalWrite(trig, LOW);
  delayMicroseconds(2);
  digitalWrite(trig, HIGH);
  delayMicroseconds(10);
  digitalWrite(trig,LOW);
  duration = pulseIn(echo,HIGH);
  distance = (duration*0.034)/2+2;
  Serial.println(distance);
  delay(2000);
  // put your main code here, to run repeatedly:
  delay(10); // this speeds up the simulation
}