#include "DHTesp.h"
DHTesp sensor;
TempAndHumidity data;
int pin = 26;
int trig = 32;
int echo = 34;
int distance;
int duriation;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  sensor.setup(pin ,DHTesp::DHT22);
  pinMode(trig, OUTPUT);
  pinMode(echo, INPUT);
 
}

void loop() {

 data = sensor.getTempAndHumidity();
 Serial.println(String(data.temperature) + " this is temperature"  );
 Serial.println("");
 Serial.println(String(data.humidity) + " this is humidity"  );
 digitalWrite(trig, LOW);
 delayMicroseconds(2);
 digitalWrite(trig, HIGH);
 delayMicroseconds(10);
 digitalWrite(trig, LOW);
 duriation = pulseIn(echo,HIGH);
 distance = (duriation * 0.034)/2 + 1;
 Serial.println(distance);
 delay(2000);
}