/*****************************************************************************************
   Slotcar Race Controller for PCLapCounter Software

   (C) Copyright 2016-2018 el.Dude - www.eldude.nl

   Arduino MEGA 2560 based slotcar race controller. Capture start/finish signals,
   controls the power relays as well as any signal LEDs and manages external buttons.

   See http://pclapcounter.be/arduino.html for the input/output protocol.
   Minimum PC Lap Counter version: 5.40

   Author: Gabriel Inäbnit
   Date  : 2016-10-14

   TODO:
   - Multi heat race proper false start and heat end detection
   - disable track call button when race is not active (or change button behaviour)
   - aborting start/restart is bogus

   Revision History
   __________ ____________________ _______________________________________________________
   2019-05-15 Gabriel Inäbnit      PCLC 5.43 - two Arduino modules mode: control
   2017-05-20 Gabriel Inäbnit      Slimming down functionality and reduce to four lanes
   2017-01-25 Gabriel Inäbnit      Light show pattern functionality
   2017-01-22 Gabriel Inäbnit      LEDs and Relay code refactored with classes
   2017-01-21 Gabriel Inäbnit      Lane detection blackout period added
   2017-01-17 Gabriel Inäbnit      Interrupt to Lane mapping also configured with array
   2017-01-16 Gabriel Inäbnit      Relays NC, r/g/y racer's stand lights, lane mappings
   2016-10-31 Gabriel Inäbnit      Race Clock - Race Finished status (RC2) PCLC v5.40
   2016-10-28 Gabriel Inäbnit      Start/Finish lights on/off/blink depending race status
   2016-10-25 Gabriel Inäbnit      Removed false start init button - no longer needed
   2016-10-24 Gabriel Inäbnit      Fix false start GO command with HW false start enabled
   2016-10-22 Gabriel Inäbnit      HW false start enable/disable, penalty, reset
   2016-10-21 Gabriel Inäbnit      false start detection and penalty procedure
   2016-10-18 Gabriel Inäbnit      external buttons handling added
   2016-10-14 Gabriel Inäbnit      initial version
 *****************************************************************************************/

/*****************************************************************************************
   Do not use pins (Mega):
   Serial1: 18 & 19 - used for interrupts
   Serial2: 16 & 17
   Serial3: 14 & 15
   BuiltIn: 13 - try to avoid it

   Digital pins Uno:
   2..13
 *****************************************************************************************/

/*****************************************************************************************
   Global variables
 *****************************************************************************************/
const long serialSpeed = 19200; // 19200;
const byte laneToRelayMapping[]    = { 10, 9 };
const char lapTime[][7] =
{
  "[SF01$",
  "[SF02$",
  "[SF03$",
  "[SF04$"
};

const unsigned long delayMillis[] =
{ // index
  0L, // 0
  1000L, // 1
  2000L, // 2
  3000L, // 3
  4000L, // 4
  5000L, // 5
  6000L, // 6
  7000L  // 7
};

#include <LiquidCrystal_I2C.h>

#define I2C_ADDR    0x27
#define LCD_COLUMNS 20
#define LCD_LINES   4

LiquidCrystal_I2C lcd(I2C_ADDR, LCD_COLUMNS, LCD_LINES);



/*****************************************************************************************
   Arduino Button Press Messages
 *****************************************************************************************/
#define BUTTON_RACE_START         "[BT01]"
#define BUTTON_RACE_RESTART       "[BT02]"
#define BUTTON_RACE_PAUSE         "[BT03]"
#define BUTTON_END_OF_RACE        "[BT07]"
#define BUTTON_TOGGLE_POWER       "[BT08]"
#define BUTTON_TOGGLE_YELLOW_FLAG "[BT09]"
#define BUTTON_STOP_AND_GO_LANE1  "[SG01]"
#define BUTTON_STOP_AND_GO_LANE2  "[SG02]"

/*****************************************************************************************
   Pin Naming
 *****************************************************************************************/
#define LED_1 7
#define LED_2 6
#define LED_3 5
#define LED_4 4
#define LED_5 3

#define LED_GO 8
#define LED_CAUTION 11
#define LED_STOP 32

#define LED_LANE_1 22
#define LED_LANE_2 24

#define lane_1_go 39
#define lane_1_stop 31
#define lane_1_pit 30
#define lane_2_go 23
#define lane_2_stop 25
#define lane_2_pit 26
#define LED_PWR_ALL 37

// Buttons
#define RACE_START 46
#define RACE_RESTART 49
#define RACE_PAUSE 41
#define RACE_END 2
#define POWER_TOGGLE 52
#define TOGGLE_YELLOW_FLAG 51
#define STOP_AND_GO_LANE_1 53
#define STOP_AND_GO_LANE_2 50

/*****************************************************************************************
   PC Lap Counter Messages
 *****************************************************************************************/
#define SL_1_ON  "SL010"
#define SL_1_OFF "SL011"
#define SL_2_ON  "SL020"
#define SL_2_OFF "SL021"
#define SL_3_ON  "SL030"
#define SL_3_OFF "SL031"
#define SL_4_ON  "SL040"
#define SL_4_OFF "SL041"
#define SL_5_ON  "SL050"
#define SL_5_OFF "SL051"

#define GO_ON       "SL060"
#define GO_OFF      "SL061"
#define STOP_ON     "SL070"
#define STOP_OFF    "SL071"
#define CAUTION_ON  "SL080"
#define CAUTION_OFF "SL081"

#define PWR_ON    "PW000"
#define PWR_OFF   "PW001"
#define PWR_1_ON  "PW011"
#define PWR_1_OFF "PW010"
#define PWR_2_ON  "PW021"
#define PWR_2_OFF "PW020"

#define PIT_1_IN "PT011"
#define PIT_1_OUT "PT010"
#define PIT_2_IN "PT021"
#define PIT_2_OUT "PT020"

/*****************************************************************************************
   Class Race
 *****************************************************************************************/
#define RACE_INIT '0'
#define RACE_STARTED '1'
#define RACE_FINISHED '2'
#define RACE_PAUSED '3'
#define CLOCK_REMAINING_TIME 'R'
#define CLOCK_ELAPSED_TIME 'E'
#define CLOCK_SEGMENT_REMAINING_TIME 'S'
#define LAPS_REMAINING 'L'

class Race {
  protected:
    char state;
    char previousState;
    bool startingLights;
        
    Race() {
      state = RACE_FINISHED;
      previousState = RACE_FINISHED;
      startingLights = LOW;
    }
    
    bool isStarted() {
      return state == RACE_STARTED;
    }
    bool isPaused() {
      return state == RACE_PAUSED;
    }
    bool isFinished () {
      return state == RACE_FINISHED;
    }
    bool isInit() {
      return state == RACE_INIT;
    }
    bool fromState(char from) {
      return from == previousState;
    }
    void init() {
      previousState = state;
      state = RACE_INIT;
    }
    void start() {
      previousState = state;
      state = RACE_STARTED;
    }
    void pause() {
      previousState = state;
      state = RACE_PAUSED;
    }
    void finish() {
      previousState = state;
      state = RACE_FINISHED;
    }
    void startingLightsOn() {
      startingLights = LOW;
    }
    void startingLightsOff() {
      startingLights = HIGH;
    }
    bool areStartingLightsOff() {
      return startingLights == HIGH;
    }
    bool areStartingLightsOn() {
      return startingLights == LOW;
    }
};

/*****************************************************************************************
   Class Race instantiations
 *****************************************************************************************/
Race race;

/*****************************************************************************************
   Class Lane
 *****************************************************************************************/
class Lane {
  protected:
    volatile long count;
    volatile bool reported;
    byte lane;
    byte pin;
  public:
    Lane(byte setLane) {
      count = -1L;
      lane = setLane - 1;
      pin = laneToRelayMapping[lane];
    }
    void reset() {
      count = -1L;
    }
    void powerOn() {
      digitalWrite(pin, HIGH);
    }
    void powerOff() {
      digitalWrite(pin, LOW);
    }
  };

/*****************************************************************************************
   Class Lane instantiations
 *****************************************************************************************/
Lane lane1(1);
Lane lane2(2);

/*****************************************************************************************
   Class Button - external buttons for PC Lap Counter
 *****************************************************************************************/
class Button {
  protected:
    String button;
    byte pin;
    unsigned int sleep;
    bool reported;
    bool pressed;
    void reportButton() {
      Serial.println(button);
      reported = true;
    }
  public:
    Button(String setButton, byte setPin, unsigned int setSleep) {
      button = setButton;
      pin = setPin;
      sleep = setSleep;
      reported = false;
      pressed = false;
      pinMode(pin, INPUT_PULLUP);
    }
    void isButtonPressed() {
      pressed = !digitalRead(pin);
      if (!reported && pressed) {
        reportButton();
        delay(sleep);
      }
      reported = pressed;
    }
};

/*****************************************************************************************
   Class Button instantiations
 *****************************************************************************************/
Button raceStart(BUTTON_RACE_START,     RACE_START,   10);
Button raceRestart(BUTTON_RACE_RESTART, RACE_RESTART, 10);
Button racePause(BUTTON_RACE_PAUSE,     RACE_PAUSE,   10);
Button raceEnd(BUTTON_END_OF_RACE,      RACE_END,     10);
Button powerToggle(BUTTON_TOGGLE_POWER, POWER_TOGGLE, 10);
Button yellowFlag(BUTTON_TOGGLE_YELLOW_FLAG, TOGGLE_YELLOW_FLAG, 10);
Button stopGolane1(BUTTON_STOP_AND_GO_LANE1, STOP_AND_GO_LANE_1, 10);
Button stopGolane2(BUTTON_STOP_AND_GO_LANE2, STOP_AND_GO_LANE_2, 10);


/*****************************************************************************************
   initializations and configurations of I/O pins
 *****************************************************************************************/
void setup() {

  // initialize serial communication
//Serial.begin(serialSpeed);

  lcd.init();
  lcd.backlight();

  // Print something
  lcd.setCursor(3, 0);
  lcd.print("PC LAPCOUNTER");
  lcd.setCursor(2, 1);
  lcd.print("SLOT CAR");
  lcd.setCursor(5, 2);
  lcd.print("RACE CONTROL ");
  lcd.setCursor(7, 3);
  lcd.print("Enjoy!");




  
  //while (!Serial) {
    //; // wait for serial port to connect. Needed for native USB
  //}
  // input pins
  //pinMode(FSbit_0, INPUT_PULLUP);
  //pinMode(FSbit_1, INPUT_PULLUP);
  //pinMode(FSbit_2, INPUT_PULLUP);
  //pinMode(FSbit_3, INPUT_PULLUP);
  // shake the dust off the relays
  //jiggleRelays();
  //delay(333);
  setPowerOn(); // switch all power relays on


  





}

/*****************************************************************************************
   relays initialization - shake the dust off the contacts
 *****************************************************************************************/
#define CLICK 20

void jiggleRelays() {
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
  delay(222);
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
  delay(111);
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
  delay(111);
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
  delay(222);
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
  delay(444);
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
  delay(222);
  allRelaysOn();
  delay(CLICK);
  allRelaysOff();
}

/*****************************************************************************************
   Class LED
 *****************************************************************************************/
class LED {
  protected:
    byte pin;
  public:
    LED (byte setPin) {
      pin = setPin;
      pinMode(pin, OUTPUT);
    }
    void on() {
      digitalWrite(pin, LOW);
    }
    void off() {
      digitalWrite(pin, HIGH);
    }
};

LED startFinishLED1(LED_1);
LED startFinishLED2(LED_2);
LED startFinishLED3(LED_3);
LED startFinishLED4(LED_4);
LED startFinishLED5(LED_5);
LED ledGO(LED_GO);
LED ledSTOP(LED_STOP);
LED ledCaution(LED_CAUTION);
LED ledPowerAll(LED_PWR_ALL);
LED ledLane1(LED_LANE_1);
LED ledLane2(LED_LANE_2);
LED ledLane1Go(lane_1_go);
LED ledLane2Go(lane_2_go);
LED ledLane1Stop(lane_1_stop);
LED ledLane2Stop(lane_2_stop);
LED ledLane1Pit(lane_1_pit);
LED ledLane2Pit(lane_2_pit);

/*****************************************************************************************
   Class Relay
 *****************************************************************************************/
class Relay {
  protected:
    byte pin;
  public:
    Relay(byte lane) {
      pin = laneToRelayMapping[lane - 1];
      pinMode(pin, OUTPUT);
    }
    void on() {
      digitalWrite(pin, LOW);
    }
    void off() {
      digitalWrite(pin, HIGH);
    }
};

Relay relay1(1);
Relay relay2(2);

/*****************************************************************************************
   engage/disengage relays
 *****************************************************************************************/
void allRelaysOn() {
  relay1.on();
  relay2.on();
}

void allRelaysOff() {
  relay1.off();
  relay2.off();
}

void setPowerOn() {
  ledPowerAll.on();
  allRelaysOn();
  setLEDsPowerOn();
}

void setPowerOff() {
  ledPowerAll.off();
  allRelaysOff();
  setLEDsPowerOff();
}

/*****************************************************************************************
   corresponding LEDs pattern for engage/disengage relays
 *****************************************************************************************/
void setLEDsPowerOn() {

  startFinishLED1.off();
  startFinishLED2.off();
  startFinishLED3.off();
  startFinishLED4.off();
  startFinishLED5.off();
  ledGO.on();
  ledSTOP.off();
  ledCaution.off();
  ledLane1.on();
  ledLane2.on();
  ledLane1Go.on();
  ledLane2Go.on();
  ledLane1Stop.off();
  ledLane2Stop.off();
  ledLane1Pit.on();
  ledLane2Pit.on();

}

void setLEDsPowerOff() {
  startFinishLED1.on();
  startFinishLED2.on();
  startFinishLED3.on();
  startFinishLED4.on();
  startFinishLED5.on();
  ledGO.off();
  ledSTOP.on();
  ledCaution.on();
  ledLane1.off();
  ledLane2.off();
  ledLane1Go.off();
  ledLane2Go.off();
  ledLane1Stop.on();
  ledLane2Stop.on();
  ledLane1Pit.on();
  ledLane2Pit.on();

}

/*****************************************************************************************
   Main loop
 *****************************************************************************************/
void loop() {
  while (Serial.available()) {
    Serial.readStringUntil('[');
    {
      String output = Serial.readStringUntil(']');
      String raceClockState = output.substring(0, 3); // RC#
      // String raceClockTime = output.substring(4, 8); // HH:MM:SS
      if (raceClockState == "RC0") { // Race Clock - Race Setup
        if (race.fromState(RACE_FINISHED)) {
            setPowerOn();
            ledSTOP.on();
            ledCaution.on();
            ledGO.on();
        }
        race.init();
        ledSTOP.off();

        // } else if (raceClockState == "RC1" && !race.isStarted) { // Race Clock - Race Started
        //   race.start(); // misses the first second
      
      
      } else if (raceClockState == "RC2") { // Race Clock - Race Finished
        ledCaution.off();
        startFinishLED1.on();
        startFinishLED2.on();
        startFinishLED3.on();
        startFinishLED4.on();
        startFinishLED5.on();
        ledSTOP.on();
        race.finish();


      } else if (raceClockState == "RC3" && !race.isPaused()) { // Race Clock - Race Paused
        race.pause(); // track call immediate, segment end after detection delay
      } else if (output == SL_1_ON) {
        race.startingLightsOn(); // set race starting light state with LED1 only
        startFinishLED1.on();
      } else if (output == SL_1_OFF) {
        race.startingLightsOff(); // set race starting light state with LED1 only
        startFinishLED1.off();
      } else if (output == SL_2_ON) {
        startFinishLED2.on();
      } else if (output == SL_2_OFF) {
        startFinishLED2.off();
      } else if (output == SL_3_ON) {
        startFinishLED3.on();
      } else if (output == SL_3_OFF) {
        startFinishLED3.off();
      } else if (output == SL_4_ON) {
        startFinishLED4.on();
      } else if (output == SL_4_OFF) {
        startFinishLED4.off();
      } else if (output == SL_5_ON) {
        startFinishLED5.on();
      } else if (output == SL_5_OFF) {
        startFinishLED5.off();

      } else if (output == GO_ON) { // race start
        race.start();
        ledGO.on();
        ledCaution.off();
        ledSTOP.off();
        startFinishLED1.off();
        startFinishLED2.off();
        startFinishLED3.off();
        startFinishLED4.off();
        startFinishLED5.off();
        


      } else if (output == GO_OFF) { // track call, segment or heat end
        race.pause();
        ledGO.off();
        ledCaution.on();
        ledSTOP.on();
        startFinishLED1.on();
        startFinishLED2.on();
        startFinishLED3.on();
        startFinishLED4.on();
        startFinishLED5.on();
       




      } else if (output == STOP_ON) {
        if (race.isPaused()) {
          ledCaution.on();
        } else {
          ledSTOP.off();
        }
        if (race.isPaused() && race.fromState(RACE_STARTED)) { // blink
          ledCaution.on();
          startFinishLED1.off();
          startFinishLED2.off();
          startFinishLED3.off();
          startFinishLED4.off();
          startFinishLED5.off();
        }
      } else if (output == STOP_OFF) {
        ledSTOP.off();
        // flickers when race is continued (track or segment)
        if (race.isPaused() &&
            race.fromState(RACE_STARTED) &&
            race.areStartingLightsOff()) { // blink
          ledCaution.off();
          startFinishLED1.on();
          startFinishLED2.on();
          startFinishLED3.on();
          startFinishLED4.on();
          startFinishLED5.on();
        }
      } else if (output == PWR_ON) {
        ledPowerAll.on();
        if (race.isStarted()) {
          ledCaution.off();
        }
        if (race.isFinished()) {
          setPowerOn();
        }
      } else if (output == PWR_OFF) {
        ledPowerAll.off();
        if (race.isFinished()) {
          setPowerOff();
        }
        if (race.isPaused()) {
          ledCaution.on();
        }
      } else if (output == PWR_1_ON) {
        lane1.powerOn();
        ledLane1.off();
        ledLane1Go.off();
        ledLane1Stop.on();
       } else if (output == PWR_1_OFF) {
        lane1.powerOff();
        ledLane1.on();
        ledLane1Go.on();
        ledLane1Stop.off();
      } else if (output == PWR_2_ON) {
        lane2.powerOn();
        ledLane2.off();
        ledLane2Go.off();
        ledLane2Stop.on();
      } else if (output == PWR_2_OFF) {
        lane2.powerOff();
        ledLane2.on();
        ledLane2Go.on();
        ledLane2Stop.off();
      } else if (output == PWR_2_OFF) {
        lane2.powerOff();
      } else if (output == PIT_1_IN) {
        ledLane1Pit.off();
        
      } else if (output == PIT_1_OUT) {
        ledLane1Pit.on();
      } else if (output == PIT_2_IN) {
        ledLane2Pit.off();
      } else if (output == PIT_2_OUT) {
        ledLane2Pit.on();
      }
    }
  }
  /** any buttons pressed */
  raceStart.isButtonPressed();
  raceRestart.isButtonPressed();
  racePause.isButtonPressed();
  raceEnd.isButtonPressed();
  powerToggle.isButtonPressed();
  yellowFlag.isButtonPressed();
  stopGolane1.isButtonPressed();
  stopGolane2.isButtonPressed();
  //raceNext.isButtonPressed();
  delay(3);
}