#include "DHTesp.h"
DHTesp sensor;
TempAndHumidity data;
int pin = 27;
int trig = 13;
int echo = 25;
long distance , duriation ;


void setup() {
  sensor.setup(pin,DHTesp::DHT22);
  // put your setup code here, to run once:
  Serial.begin(115200);
  pinMode(trig, OUTPUT);
  pinMode(echo, INPUT);
  Serial.println("Hello, ESP32!");
}

void loop() {
  data = sensor.getTempAndHumidity();
  Serial.println(String(data.temperature)+"This is temperature");
  Serial.println(String(data.humidity)+"This is humidity");
  digitalWrite(trig, LOW);
  delayMicroseconds(2);
  digitalWrite(trig, HIGH);
  delayMicroseconds(10);
  digitalWrite(trig, LOW);
  duriation = pulseIn(echo,HIGH);
  distance = (duriation * 0.034)/2;
  Serial.println(distance);
  delay(3000);
  // put your main code here, to run repeatedly:
  delay(2000); // this speeds up the simulation
}