#include <WiFi.h>
char ssid[] = "Wokwi-GUEST";
char pass[] = "";
#include <DHTesp.h>
DHTesp dhtsensor;
TempAndHumidity data;
#define LIGHT_PIN 27
#define BLUE_PIN 33
#define buzzer 14


void setup() {
  Serial.begin(115200);
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, pass);
  Serial.begin(115200);
  dhtsensor.setup(18, DHTesp::DHT22);
  pinMode(LIGHT_PIN, OUTPUT);
  pinMode(BLUE_PIN, OUTPUT);
  pinMode(buzzer, OUTPUT);

}

void loop() {
  if (WiFi.status() != WL_CONNECTED)
  {
    Serial.print("Attempting to connect");
    while (WiFi.status() != WL_CONNECTED) {
      WiFi.begin(ssid, pass);
      delay(5000);
      Serial.print(".");
    }
    Serial.println("\nConnected.");
  }
  delay(10);
  data = dhtsensor.getTempAndHumidity();

  Serial.println("Humi : " + String(data.humidity));
  Serial.println("Temp : " + String(data.temperature));
  Serial.println("------------------");

  int temp = data.temperature;
  int humi = data.humidity;

  if (temp > 25) {
    tone(buzzer, 1000, 500);
    digitalWrite(LIGHT_PIN, HIGH);
  }
  else {
    noTone(buzzer);
    digitalWrite(LIGHT_PIN, LOW);
  }
  delay(30);
  if (temp > 30) {
    digitalWrite(LIGHT_PIN, LOW);
    digitalWrite(BLUE_PIN, HIGH);
    tone(buzzer, 1500, 500);
  }
  else {
    noTone(buzzer);
    digitalWrite(BLUE_PIN, LOW);

  }
  delay(1000);
}