import time
import random
from TetrisController import *


from Displays import *

d = LCDDisplay(sda=0,scl=1,i2cid=0)
sd = SimulatedGraphicDisplay(d)
canvas = []
for y in range(0,16):
  col = []
  for x in range(0, 4):
    col.append((x+y)%2)
  canvas.append(col)
print(canvas)
sd.setCanvas(canvas)
sd.show()  

main.py

diagram.json

"""
# Displays.py
# A collection of various text-based displays
# Note - as of 7/31/24 only the LCDDisplay is implemented in this module
# Use OtherDisplays.py, GraphicDisplays.py and GraphicLCD.py for the rest
# Supports LCD 1602 displays - both using an i2c backpack as well as GPIO
# Only supports number and basic text displays 
# Author: Arijit Sengupta
"""

from machine import Pin, I2C, SPI
import time
from Log import *
from gpio_lcd import *
from pico_i2c_lcd import I2cLcd

class Display:
    """
    The Display Base class - might not actually be needed
    But here to ensure we do not have a duckTyping problem
    """

    def reset(self):
        Log.e(f"reset NOT IMPLEMENTED in {type(self).__name__}")
        
    def clear(self):
        self.reset()

    def showNumber(self, number):
        Log.e(f"showNumber NOT IMPLEMENTED! in {type(self).__name__}")

    def showText(self, text):
        Log.e(f"showText NOT IMPLEMENTED! in {type(self).__name__}")

    def scroll(self, text, speed=250):
        Log.e(f"Scroll NOT IMPLEMENTED! in {type(self).__name__}")

class LCDDisplay(Display):
    """
    LCD Display class - currently supports displays with an I2C backpack
    as well as displays directly driven via the d4-d7 pins
    
    Parameters
    --------
    This is important since Python does not have method overloading, we have one init
    to do both parallel as well as i2c displays
    pass rs, e, d4, d5, d6, d7 pin numbers for parallel displays
    
    pass sda, scl, i2cid for i2c displays - default is to use parallel so must pass sda/scl/i2cid
    if using i2c
    
    To connect the display to I2C 0 on GPIO pins 0,1
    usage: LCDDisplay(sda=0, scl=1, i2cid=0)
    
    To connect the display to I2C ID 1 on GPIO pins 2,3
    usage: LCDDisplay(sda=2, scl=3, i2cid=1)
    
    To connect via parallel with rs on pin 5, e on pin 4
    and d4,d5,d6,d7 to pins 3,2,1 and 0:
    usage:  LCDDisplay()  # yeah those are the default so you don't need to send
    usage: LCDDisplay(rs=5, e=4, d4=3, d5=2, d6=1, d7=0) # preferred - you can see how its hooked up
    
    """
    
    def __init__(self, rs=5, e=4, d4=3, d5=2, d6=1, d7=0, *, sda=-1, scl=-1, i2cid=0):
        """
        Combined constructor for the direct-driven displays
        explicitly pass in the sda and scl if you need to use I2C
        """
        
        if sda < 0:
            Log.i("LCDDisplay Constructor")
            self._lcd = GpioLcd(rs_pin=Pin(rs),
                enable_pin=Pin(e),
                d4_pin=Pin(d4),
                d5_pin=Pin(d5),
                d6_pin=Pin(d6),
                d7_pin=Pin(d7),
                num_lines=2, num_columns=16)
        else:
            Log.i("LCDDisplay (I2C) Constructor")
            i2c = I2C(i2cid, sda=Pin(sda), scl=Pin(scl), freq=400000)
            try:
                I2C_ADDR = i2c.scan()[0]
                self._lcd = I2cLcd(i2c, I2C_ADDR, 2, 16)
            except:
                raise ValueError('Could not connect to display - check wiring.')
        self._working = False

    def reset(self):
        """ 
        clear the display screen
        """
        
        Log.i("LCDDisplay: reset")
        self._lcd.clear()
        self._working = False

    def showNumber(self, number, row=0, col=0):
        """
        show a single number
        """
        
        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - showing number {number} at {row},{col}")
        self._lcd.move_to(col, row)
        self._lcd.putstr(f"{number}")
        self._working = False

    def showNumbers(self, num1, num2, colon=True, row=0, col=0):
        """
        Show two numbers optionally separated by a colon
        by default, the colon is shown
        """
        
        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - showing numbers {num1}, {num2} at {row},{col}")
        self._lcd.move_to(col, row)
        colsym = ":" if colon else " "
        self._lcd.putstr(f"{num1}{colsym}{num2}")
        self._working = False

    def showText(self, text, row=0, col=0):
        """
        Show a string - only first 4 characters will be shown
        for anything bigger than 4 characters.
        """
        
        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - showing text {text} at {row},{col}")
        self._lcd.move_to(col, row)
        self._lcd.putstr(text)
        self._working = False

    def addShape(self, position, shapearray):
        """
        Add a custom character at a position.
        position must be between 0 and 7
        shapearray needs to be a bytearray that can
        be created by going to
        https://maxpromer.github.io/LCD-Character-Creator/
        """
        if position < 0 or position > 7:
            raise ValueError('Position must be between 0 and 7.')
        if len(shapearray) != 8:
            raise ValueError('Make sure array is exactly 8 bytes')
        self._lcd.custom_char(position, shapearray)

    def scroll(self, text, row=0, speed=100, skip=2):
        """
        A very simple scroll implementation
        Scrolls some text right to left in a row

        speed is essentially the delay between refresh - lower the better
        skip is the number of chars to skip for the next refresh
        higher number will be faster but may be jerky. lower will be smooth
        but slower.

        I2C devices may not have best scrolling performance. Works
        better with GPIO-driven displays
        """

        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - scrolling text {text} in row {row}")
        for p in range(0,len(text)+skip, skip):
            curst = (text+' '*(16+skip))[p:p+16]
            for c in range(16,0,-1):
                self._lcd.move_to(c-1, row)
                self._lcd.putchar(curst[c-1])
            time.sleep(speed/1000)
        self._working = False

class SimulatedGraphicDisplay:
    """
    Simulate a 16x4 graphic display on a 16x2 LCD
    Uses 3 custom shapes for the "pixels"
    """
    
    def __init__(self, display):
        self.display = display
        self.canvas = []
        self.display.addShape(0, [0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00]) # blank
        self.display.addShape(1, [0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00]) # upper half
        self.display.addShape(2, [0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F]) # lower half
        self.display.addShape(3, [0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F]) # full block

    def setCanvas(self, canvas):
        """
        Set the canvas - should be a 16x4 array
        """
        self.canvas = canvas

    def show(self):
        self.display.showText(self.getLine(1),0,0)
        self.display.showText(self.getLine(0),1,0)

    def drawRegion(self,subcanvus,x,y):
        """
        Instead of refreshing the entire display which is slow
        Draw only a small subcanvas at point x,y
        """
        pass

    def eraseRegion(self,subcanvas,x,y):
        """
        Erase something that might have been there in the region
        Note this basically does a masked clear
        """
        pass
        
    def getLine(self, l):
        """ 
        Go through the array and return two lines of "text"
        that can be shown on the display
        """
        c = ((l+1)%2) * 2
        s = ""
        for r in range(0,16):
            if self.canvas[r][c]:
                if self.canvas[r][c+1]:
                    s = s + chr(3)
                else:
                    s = s + chr(2)
            else:
                if self.canvas[r][c+1]:
                    s = s + chr(1)
                else:
                    s = s + chr(0)
        return s    


Displays.py

"""
# Button.py - Object-Oriented implementation of a Button
# Also added a simple implementation of a single analog Joystick
# Author: Arijit Sengupta
"""

from machine import Pin, ADC
import time
from Log import *

class Button:
    """
    A simple Button class
    Create the button using Button(pinnumber, name, handler)
    handler is typically self, and create two methods buttonPressed and buttonReleased
    to handle the push and release of the button.
    The name of the button will be passed back to the handler to identify
    which button was pressed/released
    """
    
    def __init__(self, pin, name, *, handler=None, lowActive=True):
        self._pinNo = pin
        self._name = name
        Log.i(f'Button constructor: create button {name} at pin {pin}')
        if lowActive:
            self._pin = Pin(pin, Pin.IN, Pin.PULL_UP)
        else:
            self._pin = Pin(pin, Pin.IN, Pin.PULL_DOWN)
        self._debounce_time = 0
        self._lowActive = lowActive
        self._lastStatus = None
        self._handler = handler
        self._pin.irq(trigger = Pin.IRQ_FALLING | Pin.IRQ_RISING, handler = self._callback)

    def isPressed(self):
        """ Check if the button is pressed or not - useful if polling """
        
        return (self._lowActive and self._pin.value() ==0) or (not self._lowActive and self._pin.value() == 1)
    
    def setHandler(self, handler):
        """ A class that has buttonPressed(name) and buttonReleased(name) methods """
        
        self._handler = handler
        
    def _callback(self, pin):
        """ The private interrupt handler - will call appropriate handlers """
        
        t = time.ticks_ms()
        v = self._pin.value()
        if ((self._lastStatus == None or self._lastStatus != v) and t-self._debounce_time) > 50:
            self._debounce_time=t
            self._lastStatus = v
            if self._handler is not None:
                if self.isPressed():
                    self._handler.buttonPressed(self._name)
                else:
                    self._handler.buttonReleased(self._name)
        #self._debounce_time=t

class Joystick(Button):
    """
    A joystick is technically more than a Button, but this is an example
    of using a subclass to inherit some functionality, and adding other
    functions as needed. 

    So we implement a Joystick as a subclass of a button, with the internal
    button inherited from the Button class, and the horizontal and vertical
    axes implemented as ADC pin implementations. 

    Interestingly, we may have looked into AnalogSensor as well, but there is
    no tripping of a Joystick so we don't need that.
    """
    
    # Some constants to store some basic conditions
    LOW = 0
    HIGH = 65535
    MID = 32760

    # Joystick status codes
    CENTER = 0
    UP = 1
    DOWN = 2
    LEFT = 3
    RIGHT = 4
    MOVING = 5
    
    # Status text
    statuscodes = ['Center', 'Up', 'Down', 'Left', 'Right', 'Moving']

    def __init__(self, vpin, hpin, swpin, name, *, handler=None, delta=1000):
        # Let the superclass handle all button functionality
        super().__init__(swpin, name, handler=handler, lowActive=True)
        Log.i(f'Joystick constructor: create joystick at v:{vpin}, h:{hpin}')

        # H and V axis pins must be standard ADC supporting
        if vpin <26 or vpin > 28 or hpin < 26 or hpin > 28:
            raise ValueError("Joystick Error: must connect v/h to ADC pins")

        self._v = ADC(vpin)
        self._h = ADC(hpin)
        self._delta = delta

    def getData(self):
        """
        A simple method to return the x and y values
        """

        return (self._h.read_u16(), self._v.read_u16())

    def getStatusCode(self):
        """
        Return the status code of the joystick
        0 - center, 1 left 2 right 3 up 4 down
        5 if it is not quite in any distinct position
        """

        (x,y) = self.getData()

        if x < self.LOW + self._delta:
            return self.RIGHT
        if x > self.HIGH - self._delta:
            return self.LEFT
        if y < self.LOW + self._delta:
            return self.DOWN
        if y > self.HIGH - self._delta:
            return self.UP
        if x > self.MID - self._delta and x < self.MID + self._delta and y > self.MID - self._delta and y < self.MID + self._delta:
            return self.CENTER
        return self.MOVING

    def getStatus(self):
        """
        Get the status of the joystick in text
        center, left, right, up, down, moving
        """
    
        return Joystick.statuscodes[self.getStatusCode()]


Button.py

"""
# Buzzer.py - Object-oriented implementation of active and passive buzzers
# Author: Arijit Sengupta
"""

import time
from machine import Pin, PWM
from Log import *

class Buzzer:
    """
    A simple buzzer class - use it to play and pause different sounds
    ranging from fequencies 10 through 10000
    default volume is half volume - set it between 0 and 10
    """ 
    def __init__(self, pin, name='Buzzer'):
        """
        Base class init - we don't do anything with the pin here
        """
        self._name = name
        
    def beep(self, tone=500, duration=150):
        Log.i(f"Beeping {self._name} at {tone}hz for {duration} ms")
        self.play(tone)
        time.sleep(duration / 1000)
        self.stop()
    
class ActiveBuzzer(Buzzer):
    """
    An active buzzer has an internal oscillator that plays a fixed tone when power is applied
    Cannot control the tone. Only turn on and off.
    """
    
    def __init__(self, pin, name='Buzzer'):
        super().__init__(pin, name)
        self._buz = Pin(pin, Pin.OUT)
   
    def play(self, tone=500):
        """ Play sound. Tone is ignored. """
        
        Log.i(f"Start playing {self._name}")
        self._buz.value(1)
        
    def stop(self):
        """ Stop the sound. """
        
        Log.i(f"Stop playing {self._name}")
        self._buz.value(0)
    
class PassiveBuzzer(Buzzer):
    """
    A passive buzzer does not have an internal oscillator. MC needs to send a PWM signal
    to play tones. The tone is controlled by the frequency of the PWM, and the volume level
    is controlled by the duty cycle. Setting duty cycle to 0 stops sound.
    """
    
    def __init__(self, pin, name='Buzzer'):
        Log.i("PassiveBuzzer: constructor")
        super().__init__(pin, name)
        self._buz = PWM(Pin(pin))
        self._volume = 5
        self._playing = False
        self.stop()

    def play(self, tone=500):
        """ play the supplied tone. """
        
        Log.i(f"{self._name}: playing tone {tone}")
        self._buz.freq(tone)
        self._buz.duty_u16(self._volume * 100)
        self._playing = True

    def stop(self):
        """ Stop playing sound """
        
        Log.i(f"{self._name}: stopping tone")
        self._buz.duty_u16(0)
        self._playing = False

    def setVolume(self, volume=5):
        """ Change the volume of the sound currently playing and future plays """
        
        Log.i(f"{self._name}: changing volume to {volume}")
        self._volume = volume
        if (self._playing):
            self._buz.duty_u16(self._volume * 100)


Buzzer.py

"""
A basic template file for using the Model class in PicoLibrary
This will allow you to implement simple Statemodels with some basic
event-based transitions.
"""

# Import whatever Library classes you need - StateModel is obviously needed
# Counters imported for Timer functionality, Button imported for button events
import time
import random
from Log import *
from StateModel import *
from Counters import *
from Button import *
from Displays import *
from Board import *
from Piece import *

"""
This is the template for a Controller - you should rename this class to something
that is supported by your class diagram. This should associate with your other
classes, and any PicoLibrary classes. If you are using Buttons, you will implement
buttonPressed and buttonReleased.

To implement the state model, you will need to implement __init__ and 4 other methods
to support model start, stop, entry actions, exit actions, and state actions.

The following methods must be implemented:
__init__: create instances of your View and Business model classes, create an instance
of the StateModel with the necessary number of states and add the transitions, buttons
and timers that the StateModel needs

stateEntered(self, state, event) - Entry actions
stateLeft(self, state, event) - Exit actions
stateDo(self, state) - do Activities

# A couple other methods are available - but they can be left alone for most purposes

run(self) - runs the State Model - this will start at State 0 and drive the state model
stop(self) - stops the State Model - will stop processing events and stop the timers

This template currently implements a very simple state model that uses a button to
transition from state 0 to state 1 then a 5 second timer to go back to state 0.
"""

class TetrisController:

    def __init__(self):
        
        # Instantiate whatever classes from your own model that you need to control
        # Handlers can now be set to None - we will add them to the model and it will
        # do the handling
        Log.level=DEBUG
        self._display = LCDDisplay(sda=0,scl=1,i2cid=0)
        self.sl = ShapeLibrary(self._display)
        self.sh = None

        # Instantiate a Model. Needs to have the number of states, self as the handler
        # You can also say debug=True to see some of the transitions on the screen
        # Here is a sample for a model with 4 states
        self._model = StateModel(5, self, debug=True)
        
        # Instantiate any Buttons that you want to process events from and add
        # them to the model
        self._button1 = Button(12, "L", handler=None)        
        self._button2 = Button(13, "D", handler=None)        
        self._button3 = Button(14, "U", handler=None)        
        self._button4 = Button(15, "R", handler=None)        
        self._model.addButton(self._button1)
        self._model.addButton(self._button2)
        self._model.addButton(self._button3)
        self._model.addButton(self._button4)
        
        # add other buttons if needed. Note that button names must be distinct
        # for all buttons. Events will come back with [buttonname]_press and
        # [buttonname]_release
        
        # Add any timer you have. Multiple timers may be added but they must all
        # have distinct names. Events come back as [timername}_timeout
        # self._timer = SoftwareTimer(name="timer1", handler=None)
        # self._model.addTimer(self._timer)

        # Add any custom events as appropriate for your state model. e.g.
        # self._model.addCustomEvent("collision_detected")
        
        # Now add all the transitions from your state model. Any custom events
        # must be defined above first. You can have a state transition to another
        # state based on multiple events - which is why the eventlist is an array
        # Syntax: self._model.addTransition( SOURCESTATE, [eventlist], DESTSTATE)
        
        # some examples:
        self._model.addTransition(0, ["L_press", "R_press", "U_press","D_press"], 1)

        self._model.addTransition(1, ["L_press"], 2)
        self._model.addTransition(2, ["L_release"], 1)

        self._model.addTransition(1, ["R_press"], 3)
        self._model.addTransition(3, ["R_release"], 1)

        self._model.addTransition(1, ["U_press"], 4)
        self._model.addTransition(4, ["U_release"], 1)


        # etc.
    
    """
    stateEntered - is the handler for performing entry/actions
    You get the state number of the state that just entered
    Make sure actions here are quick
    """
    def stateEntered(self, state, event):
        # Again if statements to do whatever entry/actions you need
        Log.d(f'State {state} entered on event {event}')
        if state == 2:
            # entry actions for state 1
            self.sh.left()
        elif state == 3:
            self.sh.right()
        elif state == 4:
            self.sh.rotate()
        
            
    """
    stateLeft - is the handler for performing exit/actions
    You get the state number of the state that just entered
    Make sure actions here are quick
    
    This is just like stateEntered, perform only exit/actions here
    """

    def stateLeft(self, state, event):
        Log.d(f'State {state} exited on event {event}')
        if state == 1:
            # exit actions for state 0
            self.sl.eraseShape(self.sh, self.sh.y)
        # etc.
    
    """
    stateDo - the method that handles the do/actions for each state
    """
    def stateDo(self, state):
        # Now if you want to do different things for each state you can do it:
        if state == 0:
            # State 0 do/actions
            pass
        elif state == 1:
            # State1 do/actions
            # You can check your sensors here and process events manually if custom events
            # are needed (these must be previously added using addCustomEvent()
            # For example, if you want to go from state 1 to state 2 when the motion sensor
            # is tripped you can do something like this
            # In __init__ - you should have done self._model.addCustomEvent("motion")
            # Here, you check the conditions that should check for this condition
            # Then ask the model to handle the event
            # if self.motionsensor.tripped():
            # 	self._model.processEvent("motion")
            if self.sh:
                self.sl.eraseShape(self.sh, self.sh.y)
                self.sh.y = self.sh.y + 1
            # entry actions for state 0
            if self.sh == None or self.sh.y + self.sh.height > 16:
                t = random.randint(1,5)
                self.sh = sq22() if t == 1 else trg() if t == 2 else zig() if t == 3 else zag() if t == 4 else r14()
            self.sl.drawShape(self.sh, self.sh.y)

    """
    Create a run() method - you can call it anything you want really, but
    this is what you will need to call from main.py or someplace to start
    the state model.
    """
    def run(self):
        # The run method should simply do any initializations (if needed)
        # and then call the model's run method.
        # You can send a delay as a parameter if you want something other
        # than the default 0.1s. e.g.,  self._model.run(0.25)
        self._model.run()

    def stop(self):
        # The stop method should simply do any cleanup as needed
        # and then call the model's stop method.
        # This removes the button's handlers but will need to see
        # if the IRQ handlers should also be removed
        self._model.stop()
        

# Test your model. Note that this only runs the template class above
# If you are using a separate main.py or other control script,
# you will run your model from there.
if __name__ == '__main__':
    p = TetrisController()
    try:
        p.run()
    except KeyboardInterrupt:
        p.stop()    


TetrisController.py

"""
# StateModel.py
# A State model implementation
# Author: Arijit Sengupta
"""
import time
from Log import *

class StateModel:
    """
    A really simple implementation of a generic state model
    Keeps track of a number of states by sending the total number
    of states to the constructor. State numbers always start from 0
    which is the start state.

    Also takes a handler which is just a reference to a class that has
    three responder methods. The responder methods for stateEntered and
    stateLeft receives the state that was entered or left,
    with the event code that caused it. stateDo only receives the current
    state.
    
        stateEntered(state, event)
        stateLeft(state, event)
        stateDo(state)

    Currently the following types of events are supported.
    
    * Button events - these are created by calling the addButton method. The button's
      existing handler will be replaced with the model's handler, and two events of the
      following form will be enabled: [name]_press and [name]_release. Note
      that two buttons cannot have the same name.
    * Timer events - these are generated by software or hardware timers. Created by calling
      the addTimer method - will create an event [name}_timeout. Again, two timers
      cannot have the same name.
    * "no_event" is for non-event-related transitions. So if a state performs 
       the entry actions and do actions and then immediately goes to the next state, 
       no_event can be used.
    * Custom events - if a condition event needs to be executed, call the addCustomEvent
      method with the name of the event. This name can now be used for transitions, but the
      Controller must check the condition itself, and then call processEvent("eventname")
      when the codnition is satisfied.

    The calling class or the handler must override stateEntered and
    stateLeft to perform actions as per the state model

    After creating the state, call addTransition to determine
    how the model transitions from one state to the next.

    As events start coming in, call processEvent on the event to
    have the state model transition as per the transition matrix.
    """
    
    def __init__(self, numstates, handler, debug=False):
        """
        The statemodel constructor - needs 2 things minimum:
        Parameters
        ----------
        numstates - the number of states in the State model (includes the start and end states)
        handler - the handler class that should implement the model actions stateEntered and stateLeft
         - stateEntered will receive as parameter which state the model has entered - this should
            allow the handler to execute entry actions
         - stateLeft will receive as parameter which state the model left - this will allow the handler
            to execute the exit actions.
        all continuous in-state actions must be implemented in the handler in a execute loop.
        
        debug will print things to the screen like active state, transitions, events, etc.
        """
        
        self._numstates = numstates
        self._running = False
        self._transitions = []
        for i in range(0, numstates):
            self._transitions.append(None)
        self._curState = -1
        self._handler = handler
        self._debug = debug
        self._events = ['no_event']
        self._buttons = []
        self._timers = []

    def addTransition(self, fromState, events, toState):
        for event in events:
            if event in self._events:
                if not self._transitions[fromState]:
                    self._transitions[fromState] = []
                self._transitions[fromState].append((event,toState))
            else:
                raise ValueError(f"Invalid event {event}")
            
    def getTransition(self, fromState, event):
        """
        Get the distination for this transition
        """

        for (e,s) in self._transitions[fromState]:
            if e == event:
                return s
        return -1
        
    
    def start(self):
        """ start the state model - always starts at state 0 as the start state """
        
        self._curState = 0
        self._running = True
        self._handler.stateEntered(self._curState, "no_event")  # start the state model

    def stop(self):
        """
        stop the state model - this will call the handler one last time with
        what state was stopped at, and then set the running flag to false.
        """
    
        if self._running:
            self._handler.stateLeft(self._curState, "no_event")
        self._running = False
        for b in self._buttons:
            b.setHandler(None)
        for t in self._timers:
            t.setHandler(None)
            t.cancel()
        self._curState = -1

    def gotoState(self, newState, event="no_event"):
        """
        force the state model to go to a new state. This may be necessary to call
        in response to an event that is not automatically handled by the Model class.
        This will correctly call the stateLeft and stateEntered handlers
        """
        
        if (newState < self._numstates):
            if self._debug:
                Log.d(f"Going from State {self._curState} to State {newState} on event {event}")
            self._handler.stateLeft(self._curState, event)
            self._curState = newState
            self._handler.stateEntered(self._curState, event)

    def processEvent(self, event):
        """
        Get the model to process an event. The event should be one of the events defined
        at the top of the model class. Currently 4 button press and release events, and
        a timeout event is supported. Handlers for the buttons and the timers should be
        incorporated in the main class, and processevent should be called when these handlers
        are triggered.
        
        I may try to improve this design a bit in the future, but for now this is how it is
        built.
        """
        
        if (event in self._events):
            
            newstate = self.getTransition(self._curState, event)
            if newstate >= 0:
                if self._debug:
                    Log.d(f"Processing event {event}")
                self.gotoState(newstate, event)
            else:
                if self._debug:
                    if event != "no_event":
                        Log.d(f"Ignoring event {event}")
        else:
            raise ValueError(f"Invalid event {event}")

    def run(self, delay=0.1):        
        # Start the model first
        self.start()
        # Then it should do a continous loop while the model runs
        while self._running:
            # Inside, you can use if statements do handle various do/actions
            # that you need to perform for each state
            # Do not perform entry and exit actions here - those are separate
                        
            self._handler.stateDo(self._curState)

            # Ping any software timer in the model
            for timer in self._timers:
                if type(timer).__name__ == 'SoftwareTimer':
                    timer.check()
            
            # I suggest putting in a short wait so you are not overloading the poor Pico
            if delay > 0:
                time.sleep(delay)

            # If there is any no_event transition, lets process that now
            self.processEvent("no_event")


    def addButton(self, btn):
        btnname = btn._name
        event1 = f'{btnname}_press'
        event2 = f'{btnname}_release'
        
        if event1 in self._events or event2 in self._events:
            raise ValueError(f'There is already a button with the name {btnname}')
        else:
            self._events.append(event1)
            self._events.append(event2)
            btn.setHandler(self)
            self._buttons.append(btn)            

    def buttonPressed(self, name):
        """ 
        The internal button handler - now Model can take care of buttons
        that have been added using the addButton method.
        """

        self.processEvent(f'{name}_press')

    def buttonReleased(self, name):
        """
        Same thing with Button release, if you want to handle release events
        As well as press or just want to do release events only.
        """

        self.processEvent(f'{name}_release')
        
    def addTimer(self, timer):
        """
        Add a timer to the state model. All timers must have distinct names
        Exception will be raised if a timer with the same name is added.
        """
        
        eventname = f'{timer._name}_timeout'
        if eventname in self._events:
            raise ValueError(f'A timer with name {timer._name} already exists')
        else:
            self._events.append(eventname)
            timer.setHandler(self)
            self._timers.append(timer)

    def addCustomEvent(self, event):
        """
        Add custom events. This simply defines the event names for transition.
        The StateModel does not have the ability to detect these events - the
        Controller must detect the events and call processEvent to handle any
        transition based on the event.

        All events must have distinct names. Exception will be raised if the
        event already exists.
        """
        if event in self._events:
            raise ValueError(f'An event with the name {event} already exists')
        else:
            self._events.append(event)
        
    """
    If you are using a timer, handle the timeout callback
    My model can use timeout events for transitions, so simply
    send the event to the model and it will take care of
    the rest.
    """
    def timeout(self, name):
        eventname = f'{name}_timeout'
        self.processEvent(eventname)



StateModel.py

"""
# Lights.py
# implementation of different types of lights
# both digitally controlled (on/off)
# or PWM-controlled (dimming) to set brightness
# Author: Arijit Sengupta
"""

import utime
from machine import Pin, PWM
from Log import *
import _thread
MAX = 65535

baton = _thread.allocate_lock()

class Light:
    """
    The Light base class - just an LED controlled by a digital IO
    Pin. Save the pin in an instance variable
    """
    
    def __init__(self, pin, name="Unnamed"):
        """
        Light constructor - save the pin and set it to OUTPUT mode
        pin is the NUMBER of the pin that the LED is connected to. So
        if connecting to GP21, pass the value 21 to pin        
        name is an optional name of the light
        """
            
        Log.i(f"Light: constructor")
        self._name = name
        self._pin = pin
        self._blinking = False
        self._led = Pin(self._pin, Pin.OUT)  # We need this to use the IO functions

    def on(self):
        """ on: Turn the light on """
        
        Log.i(f"Light: turning on {self._name} light at pin {self._pin}")
        self._led.value(1)

    def off(self):
        """ off: turn the light off """
        
        Log.i(f"Light: turning off {self._name} light at pin {self._pin}")
        self._led.value(0)

    def flip(self):
        """ flip: turn off if it was on, on if it was off """
        
        Log.i(f"Light: Toggling {self._name} light at pin {self._pin}")
        self._led.toggle()

    def blink(self, delay=0.5, times=1):
        """ blink: turn on for delay sec, off for delay sec [times] times"""

        Log.i(f"Light: Blink {self._name} {times} times for {delay} sec")
        for x in range(0,times):
            self.on()
            utime.sleep(delay)
            self.off()
            utime.sleep(delay)


class DimLight(Light):
    """
    The Dimmable Light subclass - will have the standard on off methods
    and in addition will have the ability to set brightness
    """

    def __init__(self, pin, name="Unnamed"):
        """ Dimmable light constructor """

        Log.i("Dimmable light constructor")
        super().__init__(pin, name)
        self._pwm = PWM(self._led)  # Create an instance of PWM object (pulse-width modulation)
        self._pwm.freq(100000)   # set frequency to 100 khz
        self._onState = False
        self._running = False

    def on(self):
        """ Turn on - full brightness max is 255 """
        
        self._running = False
        self._onState = True
        Log.i(f"Dimlight: turn Light {self._name} on (full brightness)")
        self.setBrightness(MAX)

    def off(self):
        """  Turn off - set brightness to 0 """
        
        self._running = False
        self._onState = False
        Log.i(f"Dimlight - turn Light {self._name} off (brightness 0)")
        self.setBrightness(0)

    def flip(self):
        """ flip: turn off if it was on, on if it was off """
        
        Log.i(f"Light: Toggling {self._name} light at pin {self._pin}")
        if self._onState:
            self.off()
        else:
            self.on()       
        
    def setBrightness(self, brightness):
        """ Set brightness to a specific level 0-255 """

        Log.i(f"Dimlight: setting Light {self._name} brightness to {brightness}")
        if (brightness == MAX):
            self._pwm.duty_u16(MAX)
        else:
            self._pwm.duty_u16(brightness * brightness)
        
        if brightness < 50:
            self._onState = False
        else:
            self._onState = True

    def upDown(self):
        """
        # Do a quick demo of going up and down full brightness levels
        # Here it is better to use ChangeDutyCycle
        """
        
        Log.i(f"Dimlight: do an up-down demo on Light {self._name}")
        self._running = True
        dc = 0
        for i in range (0, 25):
            if not self._running:
                break
            dc += 10
            self.setBrightness(dc)
            utime.sleep_ms(100)

        for i in range (0, 25):
            if not self._running:
                break
            dc -= 10
            self.setBrightness(dc)
            utime.sleep_ms(100)
        self._running = False

Lights.py

"""
Log.py - a simplistic Logging process. Built to kind of mimic the
Android Logging process, but at the same time having a global level
set to see the types of logs being displayed.

Basic usage:

Log.level = DEBUG  # set global log level

# Options are: ALL/INFO (everything) DEBUG (debug and higher), ERRO (only errors)
Log.i(f'help')     # Info message: f-strings recommended for showing variables
Log.d(f'value: {v}') # Debug message
Log.e(f'Exception: {x}') # Error message
Log.name('Myproject') # Set a global project name
"""

""" Debug levels """
ALL = 4  # All messages are displayed
INFO = 3  # Basically the same as ALL - for future-proofing
DEBUG = 2  # Info is hidden - debug and higher shown
ERROR = 1  # Only error messages shown
NONE = 0  # No messages are shown from log classes


class Log:

    name = ''
    level = ALL

    @classmethod
    def i(cls, message):
        if (cls.level >= INFO):
            Log.pr(message)

    @classmethod
    def d(cls, message):
        if (cls.level >= DEBUG):
            Log.pr(message)

    @classmethod
    def e(cls, message):
        if (cls.level >= ERROR):
            Log.pr(message)

    @classmethod
    def pr(cls, message):
        if cls.name:
            m = cls.name + ": " + message
        else:
            m = message
        print(m)


if __name__ == '__main__':
    print("Hello")
    Log.level = ALL
    Log.name = 'Test'
    Log.i(f'This should print (level: {Log.level})')
    
    Log.level = ERROR
    Log.i(f'This should NOT print (level: {Log.level})')
    Log.e(f'This should print (level: {Log.level})')
    



Log.py

"""Source: Instructables, Tom's Hardware and GitHub """
"""Not Authored by Dr. Sengupta """
"""Implements a HD44780 character LCD connected via ESP32/RPi GPIO pins."""

from lcd_api import LcdApi
from machine import Pin
from utime import sleep_ms, sleep_us


class GpioLcd(LcdApi):
    """Implements a HD44780 character LCD connected via ESP32 GPIO pins."""

    def __init__(self, rs_pin, enable_pin, d0_pin=None, d1_pin=None,
                 d2_pin=None, d3_pin=None, d4_pin=None, d5_pin=None,
                 d6_pin=None, d7_pin=None, rw_pin=None, backlight_pin=None,
                 num_lines=2, num_columns=16):
        """Constructs the GpioLcd object. All of the arguments must be machine.Pin
        objects which describe which pin the given line from the LCD is
        connected to.
        When used in 4-bit mode, only D4, D5, D6, and D7 are physically
        connected to the LCD panel. This function allows you call it like
        GpioLcd(rs, enable, D4, D5, D6, D7) and it will interpret that as
        if you had actually called:
        GpioLcd(rs, enable, d4=D4, d5=D5, d6=D6, d7=D7)
        The enable 8-bit mode, you need pass d0 through d7.
        The rw pin isn't used by this library, but if you specify it, then
        it will be set low.
        """
        self.rs_pin = rs_pin
        self.enable_pin = enable_pin
        self.rw_pin = rw_pin
        self.backlight_pin = backlight_pin
        self._4bit = True
        if d4_pin and d5_pin and d6_pin and d7_pin:
            self.d0_pin = d0_pin
            self.d1_pin = d1_pin
            self.d2_pin = d2_pin
            self.d3_pin = d3_pin
            self.d4_pin = d4_pin
            self.d5_pin = d5_pin
            self.d6_pin = d6_pin
            self.d7_pin = d7_pin
            if self.d0_pin and self.d1_pin and self.d2_pin and self.d3_pin:
                self._4bit = False
        else:
            # This is really 4-bit mode, and the 4 data pins were just
            # passed as the first 4 arguments, so we switch things around.
            self.d0_pin = None
            self.d1_pin = None
            self.d2_pin = None
            self.d3_pin = None
            self.d4_pin = d0_pin
            self.d5_pin = d1_pin
            self.d6_pin = d2_pin
            self.d7_pin = d3_pin
        self.rs_pin.init(Pin.OUT)
        self.rs_pin.value(0)
        if self.rw_pin:
            self.rw_pin.init(Pin.OUT)
            self.rw_pin.value(0)
        self.enable_pin.init(Pin.OUT)
        self.enable_pin.value(0)
        self.d4_pin.init(Pin.OUT)
        self.d5_pin.init(Pin.OUT)
        self.d6_pin.init(Pin.OUT)
        self.d7_pin.init(Pin.OUT)
        self.d4_pin.value(0)
        self.d5_pin.value(0)
        self.d6_pin.value(0)
        self.d7_pin.value(0)
        if not self._4bit:
            self.d0_pin.init(Pin.OUT)
            self.d1_pin.init(Pin.OUT)
            self.d2_pin.init(Pin.OUT)
            self.d3_pin.init(Pin.OUT)
            self.d0_pin.value(0)
            self.d1_pin.value(0)
            self.d2_pin.value(0)
            self.d3_pin.value(0)
        if self.backlight_pin is not None:
            self.backlight_pin.init(Pin.OUT)
            self.backlight_pin.value(0)

        # See about splitting this into begin

        sleep_ms(20)   # Allow LCD time to powerup
        # Send reset 3 times
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(5)    # need to delay at least 4.1 msec
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(1)
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(1)
        cmd = self.LCD_FUNCTION
        if not self._4bit:
            cmd |= self.LCD_FUNCTION_8BIT
        self.hal_write_init_nibble(cmd)
        sleep_ms(1)
        LcdApi.__init__(self, num_lines, num_columns)
        if num_lines > 1:
            cmd |= self.LCD_FUNCTION_2LINES
        self.hal_write_command(cmd)

    def hal_pulse_enable(self):
        """Pulse the enable line high, and then low again."""
        self.enable_pin.value(0)
        sleep_us(1)
        self.enable_pin.value(1)
        sleep_us(1)       # Enable pulse needs to be > 450 nsec
        self.enable_pin.value(0)
        sleep_us(100)     # Commands need > 37us to settle

    def hal_write_init_nibble(self, nibble):
        """Writes an initialization nibble to the LCD.
        This particular function is only used during initialization.
        """
        self.hal_write_4bits(nibble >> 4)

    def hal_backlight_on(self):
        """Allows the hal layer to turn the backlight on."""
        if self.backlight_pin:
            self.backlight_pin.value(1)

    def hal_backlight_off(self):
        """Allows the hal layer to turn the backlight off."""
        if self.backlight_pin:
            self.backlight_pin.value(0)

    def hal_write_command(self, cmd):
        """Writes a command to the LCD.
        Data is latched on the falling edge of E.
        """
        self.rs_pin.value(0)
        self.hal_write_8bits(cmd)
        if cmd <= 3:
            # The home and clear commands require a worst
            # case delay of 4.1 msec
            sleep_ms(5)

    def hal_write_data(self, data):
        """Write data to the LCD."""
        self.rs_pin.value(1)
        self.hal_write_8bits(data)

    def hal_write_8bits(self, value):
        """Writes 8 bits of data to the LCD."""
        if self.rw_pin:
            self.rw_pin.value(0)
        if self._4bit:
            self.hal_write_4bits(value >> 4)
            self.hal_write_4bits(value)
        else:
            self.d3_pin.value(value & 0x08)
            self.d2_pin.value(value & 0x04)
            self.d1_pin.value(value & 0x02)
            self.d0_pin.value(value & 0x01)
            self.hal_write_4bits(value >> 4)

    def hal_write_4bits(self, nibble):
        """Writes 4 bits of data to the LCD."""
        self.d7_pin.value(nibble & 0x08)
        self.d6_pin.value(nibble & 0x04)
        self.d5_pin.value(nibble & 0x02)
        self.d4_pin.value(nibble & 0x01)
        self.hal_pulse_enable()

gpio_lcd.py

"""Source: Instructables, Tom's Hardware and GitHub """
"""Not Authored by Dr. Sengupta """
"""Provides an API for talking to HD44780 compatible character LCDs."""

import time

class LcdApi:
    """Implements the API for talking with HD44780 compatible character LCDs.
    This class only knows what commands to send to the LCD, and not how to get
    them to the LCD.
    It is expected that a derived class will implement the hal_xxx functions.
    """

    # The following constant names were lifted from the avrlib lcd.h
    # header file, however, I changed the definitions from bit numbers
    # to bit masks.
    #
    # HD44780 LCD controller command set

    LCD_CLR = 0x01              # DB0: clear display
    LCD_HOME = 0x02             # DB1: return to home position

    LCD_ENTRY_MODE = 0x04       # DB2: set entry mode
    LCD_ENTRY_INC = 0x02        # --DB1: increment
    LCD_ENTRY_SHIFT = 0x01      # --DB0: shift

    LCD_ON_CTRL = 0x08          # DB3: turn lcd/cursor on
    LCD_ON_DISPLAY = 0x04       # --DB2: turn display on
    LCD_ON_CURSOR = 0x02        # --DB1: turn cursor on
    LCD_ON_BLINK = 0x01         # --DB0: blinking cursor

    LCD_MOVE = 0x10             # DB4: move cursor/display
    LCD_MOVE_DISP = 0x08        # --DB3: move display (0-> move cursor)
    LCD_MOVE_RIGHT = 0x04       # --DB2: move right (0-> left)

    LCD_FUNCTION = 0x20         # DB5: function set
    LCD_FUNCTION_8BIT = 0x10    # --DB4: set 8BIT mode (0->4BIT mode)
    LCD_FUNCTION_2LINES = 0x08  # --DB3: two lines (0->one line)
    LCD_FUNCTION_10DOTS = 0x04  # --DB2: 5x10 font (0->5x7 font)
    LCD_FUNCTION_RESET = 0x30   # See "Initializing by Instruction" section

    LCD_CGRAM = 0x40            # DB6: set CG RAM address
    LCD_DDRAM = 0x80            # DB7: set DD RAM address

    LCD_RS_CMD = 0
    LCD_RS_DATA = 1

    LCD_RW_WRITE = 0
    LCD_RW_READ = 1

    def __init__(self, num_lines, num_columns):
        self.num_lines = num_lines
        if self.num_lines > 4:
            self.num_lines = 4
        self.num_columns = num_columns
        if self.num_columns > 40:
            self.num_columns = 40
        self.cursor_x = 0
        self.cursor_y = 0
        self.implied_newline = False
        self.backlight = True
        self.display_off()
        self.backlight_on()
        self.clear()
        self.hal_write_command(self.LCD_ENTRY_MODE | self.LCD_ENTRY_INC)
        self.hide_cursor()
        self.display_on()

    def clear(self):
        """Clears the LCD display and moves the cursor to the top left
        corner.
        """
        self.hal_write_command(self.LCD_CLR)
        self.hal_write_command(self.LCD_HOME)
        self.cursor_x = 0
        self.cursor_y = 0

    def show_cursor(self):
        """Causes the cursor to be made visible."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def hide_cursor(self):
        """Causes the cursor to be hidden."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def blink_cursor_on(self):
        """Turns on the cursor, and makes it blink."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR | self.LCD_ON_BLINK)

    def blink_cursor_off(self):
        """Turns on the cursor, and makes it no blink (i.e. be solid)."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def display_on(self):
        """Turns on (i.e. unblanks) the LCD."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def display_off(self):
        """Turns off (i.e. blanks) the LCD."""
        self.hal_write_command(self.LCD_ON_CTRL)

    def backlight_on(self):
        """Turns the backlight on.
        This isn't really an LCD command, but some modules have backlight
        controls, so this allows the hal to pass through the command.
        """
        self.backlight = True
        self.hal_backlight_on()

    def backlight_off(self):
        """Turns the backlight off.
        This isn't really an LCD command, but some modules have backlight
        controls, so this allows the hal to pass through the command.
        """
        self.backlight = False
        self.hal_backlight_off()

    def move_to(self, cursor_x, cursor_y):
        """Moves the cursor position to the indicated position. The cursor
        position is zero based (i.e. cursor_x == 0 indicates first column).
        """
        self.cursor_x = cursor_x
        self.cursor_y = cursor_y
        addr = cursor_x & 0x3f
        if cursor_y & 1:
            addr += 0x40    # Lines 1 & 3 add 0x40
        if cursor_y & 2:    # Lines 2 & 3 add number of columns
            addr += self.num_columns
        self.hal_write_command(self.LCD_DDRAM | addr)

    def putchar(self, char):
        """Writes the indicated character to the LCD at the current cursor
        position, and advances the cursor by one position.
        """
        if char == '\n':
            if self.implied_newline:
                # self.implied_newline means we advanced due to a wraparound,
                # so if we get a newline right after that we ignore it.
                pass
            else:
                self.cursor_x = self.num_columns
        else:
            self.hal_write_data(ord(char))
            self.cursor_x += 1
        if self.cursor_x >= self.num_columns:
            self.cursor_x = 0
            self.cursor_y += 1
            self.implied_newline = (char != '\n')
        if self.cursor_y >= self.num_lines:
            self.cursor_y = 0
        self.move_to(self.cursor_x, self.cursor_y)

    def putstr(self, string):
        """Write the indicated string to the LCD at the current cursor
        position and advances the cursor position appropriately.
        """
        for char in string:
            self.putchar(char)

    def custom_char(self, location, charmap):
        """Write a character to one of the 8 CGRAM locations, available
        as chr(0) through chr(7).
        """
        location &= 0x7
        self.hal_write_command(self.LCD_CGRAM | (location << 3))
        self.hal_sleep_us(40)
        for i in range(8):
            self.hal_write_data(charmap[i])
            self.hal_sleep_us(40)
        self.move_to(self.cursor_x, self.cursor_y)

    def hal_backlight_on(self):
        """Allows the hal layer to turn the backlight on.
        If desired, a derived HAL class will implement this function.
        """
        pass

    def hal_backlight_off(self):
        """Allows the hal layer to turn the backlight off.
        If desired, a derived HAL class will implement this function.
        """
        pass

    def hal_write_command(self, cmd):
        """Write a command to the LCD.
        It is expected that a derived HAL class will implement this
        function.
        """
        raise NotImplementedError

    def hal_write_data(self, data):
        """Write data to the LCD.
        It is expected that a derived HAL class will implement this
        function.
        """
        raise NotImplementedError

    def hal_sleep_us(self, usecs):
        """Sleep for some time (given in microseconds)."""
        time.sleep_us(usecs)

lcd_api.py

"""Source: Instructables, Tom's Hardware and GitHub """
"""Not Authored by Dr. Sengupta """

import utime
import gc

from lcd_api import LcdApi
from machine import I2C

# PCF8574 pin definitions
MASK_RS = 0x01       # P0
MASK_RW = 0x02       # P1
MASK_E  = 0x04       # P2

SHIFT_BACKLIGHT = 3  # P3
SHIFT_DATA      = 4  # P4-P7

class I2cLcd(LcdApi):
    
    #Implements a HD44780 character LCD connected via PCF8574 on I2C

    def __init__(self, i2c, i2c_addr, num_lines, num_columns):
        self.i2c = i2c
        self.i2c_addr = i2c_addr
        self.i2c.writeto(self.i2c_addr, bytes([0]))
        utime.sleep_ms(20)   # Allow LCD time to powerup
        # Send reset 3 times
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(5)    # Need to delay at least 4.1 msec
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(1)
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(1)
        # Put LCD into 4-bit mode
        self.hal_write_init_nibble(self.LCD_FUNCTION)
        utime.sleep_ms(1)
        LcdApi.__init__(self, num_lines, num_columns)
        cmd = self.LCD_FUNCTION
        if num_lines > 1:
            cmd |= self.LCD_FUNCTION_2LINES
        self.hal_write_command(cmd)
        gc.collect()

    def hal_write_init_nibble(self, nibble):
        # Writes an initialization nibble to the LCD.
        # This particular function is only used during initialization.
        byte = ((nibble >> 4) & 0x0f) << SHIFT_DATA
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        gc.collect()
        
    def hal_backlight_on(self):
        # Allows the hal layer to turn the backlight on
        self.i2c.writeto(self.i2c_addr, bytes([1 << SHIFT_BACKLIGHT]))
        gc.collect()
        
    def hal_backlight_off(self):
        #Allows the hal layer to turn the backlight off
        self.i2c.writeto(self.i2c_addr, bytes([0]))
        gc.collect()
        
    def hal_write_command(self, cmd):
        # Write a command to the LCD. Data is latched on the falling edge of E.
        byte = ((self.backlight << SHIFT_BACKLIGHT) |
                (((cmd >> 4) & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        byte = ((self.backlight << SHIFT_BACKLIGHT) |
                ((cmd & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        if cmd <= 3:
            # The home and clear commands require a worst case delay of 4.1 msec
            utime.sleep_ms(5)
        gc.collect()

    def hal_write_data(self, data):
        # Write data to the LCD. Data is latched on the falling edge of E.
        byte = (MASK_RS |
                (self.backlight << SHIFT_BACKLIGHT) |
                (((data >> 4) & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        byte = (MASK_RS |
                (self.backlight << SHIFT_BACKLIGHT) |
                ((data & 0x0f) << SHIFT_DATA))      
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        gc.collect()

pico_i2c_lcd.py

"""
Shape Library
"""
blank = [0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00]
upper = [0x1F,0x1F,0x1F,0x1F,0x00,0x00,0x00,0x00]
lower = [0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F]
full = [0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F]

class ShapeLibrary:
    def __init__(self, display):
        display.addShape(0,blank)    
        display.addShape(1,upper)
        display.addShape(2,lower)
        display.addShape(3,full)
        self.display = display

    def drawShape(self,shape,pos):
        blocks = shape.getBlocks()
        for y in range(0,2):
            for b in range(0,len(blocks[y])):
                self.display.showText(chr(blocks[y][b]),y,pos+b)

    def eraseShape(self,shape, pos):
        blocks = shape.getBlocks()
        for y in range(0,2):
            for b in range(0,len(blocks[y])):
                if blocks[y][b]:
                    self.display.showText(chr(0),y,pos+b)



ShapeLibrary.py

class Shape:
    def __init__(self):
        self.x = 0
        self.y = 0
        self.width = 0
        self.height = 0
        self.rot = 0

    def rotate(self):
        pass

    def right(self):
        pass

    def left(self):
        pass

    def down(self):
        self.y = self.y + 1

    def getBlocks(self):
        pass

class sq22(Shape):
    def __init__(self):
        super().__init__()
        self.width = 2
        self.height = 2

    def rotate(self):
        return
    
    def left(self):
        if self.x > 0:
            self.x = self.x -1
    
    def right(self):
        if self.x < 2:
            self.x = self.x + 1

    def getBlocks(self):
        if self.x ==0:
            return [[0,0],[3,3]]
        elif self.x == 1:
            return [[2,2],[1,1]]
        elif self.x == 2:
            return [[3,3],[0,0]]

class r14(Shape):
    def __init__(self):
        super().__init__()
        self.width = 1
        self.height = 4
    
    def rotate(self):
        self.rot = (self.rot + 1) % 2
        self.x = 0
        if self.rot:
            self.width = 4
            self.height = 1
        else:
            self.width = 1
            self.height = 4

    def left(self):
        if self.x > 0:
            self.x = self.x -1
    
    def right(self):
        if self.rot:
            return
        elif self.x < 3:
            self.x = self.x + 1

    def getBlocks(self):
        if self.rot:
            return [[3],[3]]
        elif self.x ==0:
            return [[0,0,0,0],[2,2,2,2]]
        elif self.x == 1:
            return [[0,0,0,0],[1,1,1,1]]
        elif self.x == 2:
            return [[2,2,2,2],[0,0,0,0]]
        elif self.x == 3:
            return [[1,1,1,1],[0,0,0,0]]

class zig(Shape):
    def __init__(self):
        super().__init__()
        self.width = 2
        self.height = 3
    
    def rotate(self):
        # if vertical and x > 1 then x will become 1
        if self.rot == 0 and self.x > 1:
            self.x = 1
        self.rot = (self.rot + 1) % 2
        if self.rot: #horizontal
            self.width = 3
            self.height = 2
        else:
            self.width = 2
            self.height = 3

    def left(self):
        if self.x > 0:
            self.x = self.x -1
    
    def right(self):
        if (self.rot): # horizontal
            if self.x < 1:
                self.x = self.x + 1
        else: # vertical
            if self.x < 2:
                self.x = self.x + 1

    def getBlocks(self):
        if self.rot == 0:
            if self.x == 0:
                return [[0,0,0],[2,3,1]]
            elif self.x == 1:
                return [[0,2,2],[1,1,0]]
            elif self.x == 2:
                return [[2,3,1],[0,0,0]]
        elif self.rot == 1:
            if self.x == 0:
                return [[2,0],[1,3]]
            elif self.x == 1:
                return [[3,2],[0,1]]

class zag(zig):
    def __init__(self):
        super().__init__()
    
    def getBlocks(self):
        if self.rot == 0:
            if self.x == 0:
                return [[0,0,0],[1,3,2]]
            elif self.x == 1:
                return [[2,2,0],[0,1,1]]
            elif self.x == 2:
                return [[1,3,2],[0,0,0]]
        elif self.rot == 1:
            if self.x == 0:
                return [[0,2],[3,1]]
            elif self.x == 1:
                return [[2,3],[1,0]]

class trg(Shape):
    def __init__(self):
        super().__init__()
        self.width = 2
        self.height = 3
    
    def rotate(self):
        # if vertical and x > 1 then x will become 1
        if self.rot % 2 == 0 and self.x > 1:
            self.x = 1
        self.rot = (self.rot + 1) % 4
        if self.rot % 2: #horizontal
            self.width = 3
            self.height = 2
        else:
            self.width = 2
            self.height = 3

    def left(self):
        if self.x > 0:
            self.x = self.x -1
    
    def right(self):
        if (self.rot % 2): # horizontal
            if self.x < 1:
                self.x = self.x + 1
        else: # vertical
            if self.x < 2:
                self.x = self.x + 1

    def getBlocks(self):
        if self.rot == 0:
            if self.x == 0:
                return [[0,0,0],[2,3,2]]
            elif self.x == 1:
                return [[0,2,0],[1,1,1]]
            elif self.x == 2:
                return [[2,3,2],[0,0,0]]
        elif self.rot == 1:
            if self.x == 0:
                return [[2,0],[3,1]]
            elif self.x == 1:
                return [[3,2],[1,0]]
        elif self.rot == 2:
            if self.x == 0:
                return [[0,0,0],[1,3,1]]
            elif self.x == 1:
                return [[2,2,2],[0,1,0]]
            elif self.x == 2:
                return [[1,3,1],[0,0,0]]
        elif self.rot == 3:
            if self.x == 0:
                return [[0,2],[1,3]]
            elif self.x == 1:
                return [[2,3],[0,1]]


Shape.py

"""
# Counters.py
# A collection of different kinds of counters that might be used for
# various projects
# Author: Arijit Sengupta
"""

import time
from machine import Timer, RTC
from Log import *

class Counter:
    """
    Counter base class - provides an internal count, an initiailzer and a reset method
    everything else should be defined at subclass level
    """
    
    def __init__(self, name='Counter'):
        Log.i(f"{name}: constructor")
        self._name = name
        self._count = 0

    def reset(self):
        Log.i("Counter - reset")
        self._count = 0

class UpDownCounter(Counter):
    """ A basic updown counter - can go up or down, can set up a min and max """
    
    def __init__(self, name='Updown counter', min = None, max = None):
        Log.i(f"{name} constructor")
        super().__init__(name)
        self._min = min
        self._max = max

    def up(self, step=1):
        """
        count up - with an optional step. Note that if the result will be less than max,
        no change will be made.
        """
                
        Log.i("Updowncounter incrementing")
        if (self._max is None or self._count + step <= self._max):
            self._count = self._count + step

    def down(self, step=1):
        """
        Count down - with an optional step. Note that if the result will be less than min,
        no change will be made
        """
        
        Log.i("Updowncounter decrementing")
        if (self._min is None or self._count - step >= self._min):
            self._count = self._count - step

    def __str__(self)->str:
        """ a string representation of the internal count """
        
        return f"{self._count}"

class TimeKeeper(Counter):
    """
    Keeps time as a count. Basically a stopwatch
    Internal count stores the number of ms of counting
    Can be stopped and started many times. Only reset will set
    count to 0
    """
    
    def __init__(self,name='Timekeeper'):
        Log.i(f"{name} : constructor")
        super().__init__(name)
        self._starttime = 0
        self._running = False

    def start(self):
        """ Start the timer. Note that if previously stopped, this will add to previous time """
        
        Log.i("Timekeeper: start")
        """ If timer was already running, the start will get reset to the new time """

        self._starttime = time.ticks_ms()
        self._running = True

    def stop(self):
        """ Stop the timer. Count will save the # of ms elapsed """
        
        Log.i("Timekeeper: stop")
        """ If it was already stopped, nothing to be done """
        if self._running:
            self._running = False
            self._count = self._count + time.ticks_diff(time.ticks_ms(),self._starttime)

    def reset(self):
        """ 
        Resetting the timer will set count to 0 and starttime to the current time 
        But timer keeps running if not stopped
        """
        super().reset()
        self._starttime = time.ticks_ms()

    def __str__(self) -> str:
        """ Get a string representation of time in HH:MM:SS.ms format """
        
        curtime = self._count + (time.ticks_diff(time.ticks_ms(),self._starttime) if self._running else 0)
        ms = curtime % 1000
        sec = (curtime // 1000) % 60
        min = (curtime // 60000) % 60
        hr = (curtime // 3600000)
        return f"{hr:02d}:{min:02d}:{sec:02d}.{ms:03d}"


class BaseTimer(Counter):
    """ 
    Decided to create a base class for the Software and Hardware timers
    since there are many properties in common. Now allowing no handlers in init
    but obviously a handler has to be set in order to ensure something happens when
    the time runs out.
    """

    def __init__(self, name='timer', handler=None):
        super().__init__(name)
        self._handler = handler
        self._started = False

    def setHandler(self, handler):
        self._handler = handler

    def start(self, seconds):
        self._count = seconds
        self._started = True

    def cancel(self):
        self._started = False
        self._count = 0

    def reset(self):
        """ Make sure reset cancels the timer first """
        
        super().reset()
        self.cancel()
        
class HardwareTimer(BaseTimer):
    """
    This uses the hardware internal timer of the Pico. This does NOT WORK on the simulator!
    The internal count here is the timer setting that is not updated until reset or cancelled
    
    """
    
    def __init__(self, name='Hardware Timer', handler=None):
        """
        A hardware timer must be initialized with a handler. The handler must implement
        a timeout() method which will be called when the timer is up. Ideally, there
        should only be a single timer active at a time.
        """
        
        super().__init__(name, handler)
        self._timer = Timer(-1)

    def start(self, seconds):
        """ Start the timer with the number of seconds to use. """
        
        super().start(seconds)
        self._timer.init(period = int(seconds*1000), mode=Timer.ONE_SHOT, callback = self.timeout)

    def cancel(self):
        """ Cancel the timer. Note that a normal stop will cause the handler callback. """
        
        if self._started:
            self._timer.deinit()
        super().cancel()
    
    def timeout(self, timer):
        self.cancel()
        self._handler.timeout(self._name)

class SoftwareTimer(BaseTimer):
    """
    A simpler software-based timer that will work on the simulator as well. Caller
    again implements a handler method, but will need to poll the timer using the
    check method at regular intervals. Check will not return anything, but will
    call the timeout function of the caller just like the hardware timer.
    """
    
    def __init__(self, name='Software Timer', handler=None):
        super().__init__(name, handler)
        self._starttime = 0
        self._started = False

    def start(self, seconds):
        """ Start the timer with a set number of seconds """
        
        Log.i(f"Starting timer with {seconds} seconds")
        self._count = seconds
        self._starttime = time.ticks_ms()
        self._started = True

    def cancel(self):
        """ Cancel the timer - timeout hander will NOT be called """
        
        if self._started:
            self._starttime = 0
            Log.i(f"{self._count} sec timer cancelled")
        super().cancel()

    def check(self):
        """
        Periodically call the check method - can be called from anywhere
        """
        
        if self._started and time.ticks_diff(time.ticks_ms(), self._starttime) > self._count * 1000:
            Log.i(f"{self._name}: {self._count} sec timer is up")
            self._started = False
            self._count = 0
            self._handler.timeout(self._name)

class Time:
    @classmethod
    def getTime(cls):
        """
        Return the currnet time using the datetime 8-tuple:
        (year (4 dig), month (1-12), date(1-31), hour (0-23), min(0,59), sec(0-59), wkday(0-6), yday(1-366))
        """
        return time.localtime()

    @classmethod
    def setTime(cls, tm):
        """
        Send a semi-valid time tuple - wkday and yday are ignored
        The rest have to be valid (be careful about no. of days in a month
        """
        RTC().datetime((tm[0], tm[1], tm[2], 0, tm[3], tm[4], tm[5], 0))
    


Counters.py

class Board:
    """
    Represents a 4x16 board for a Tetris game.
    """

    WIDTH = 4
    HEIGHT = 16

    def __init__(self):
        """Initializes a new empty board."""
        self.grid = [[0 for _ in range(self.WIDTH)] for _ in range(self.HEIGHT)]

    def __str__(self):
        """Returns a string representation of the board."""
        board_str = ""
        for row in self.grid:
            board_str += "".join(["#" if cell else "." for cell in row]) + "\n"
        return board_str

    def is_valid_position(self, row, col):
        """Checks if a given row and column is within the board boundaries."""
        return 0 <= row < self.HEIGHT and 0 <= col < self.WIDTH

    def is_empty(self, row, col):
        """Checks if a given cell on the board is empty."""
        return self.grid[row][col] == 0

    def place_piece(self, piece, row, col):
        """
        Places a Tetris piece on the board at the given position.
        Prevents partial placement if a collision occurs.

        Args:
            piece (Piece): A Piece object representing the Tetris piece.
            row (int): The row to place the piece.
            col (int): The column to place the piece.

        Returns:
            bool: True if the piece was placed successfully, False otherwise.
        """

        # Collision check before placement
        for r in range(len(piece.shape)):
            for c in range(len(piece.shape[0])):
                if piece.shape[r][c]:
                    board_row = row + r
                    board_col = col + c
                    if (
                        not self.is_valid_position(board_row, board_col)
                        or not self.is_empty(board_row, board_col)
                    ):
                        return False  # Collision detected, cannot place

        # Place the piece (if no collisions were found)
        for r in range(len(piece.shape)):
            for c in range(len(piece.shape[0])):
                if piece.shape[r][c]:
                    self.grid[row + r][col + c] = 1

        return True  # Piece placed successfully

    def can_move_piece(self, piece, row, col, new_row=None, new_col=None):
        """Checks if the piece can be moved to a new position without collisions."""
        if new_row is None:
            new_row = row
        if new_col is None:
            new_col = col

        self.remove_piece(piece, row, col)  # Temporarily remove the piece

        can_move = True
        for r in range(len(piece.shape)):
            for c in range(len(piece.shape[0])):
                if piece.shape[r][c]:
                    board_row = new_row + r
                    board_col = new_col + c
                    if (
                        not self.is_valid_position(board_row, board_col)
                        or not self.is_empty(board_row, board_col)
                    ):
                        can_move = False  # Collision detected

        self.place_piece(piece, row, col)  # Place the piece back

        return can_move

    def move_piece(self, piece, row, col, direction):
        """Moves the piece in the specified direction if possible."""
        new_row = row
        new_col = col
        if direction == "down":
            new_row += 1
        elif direction == "left":
            new_col -= 1
        elif direction == "right":
            new_col += 1

        if self.can_move_piece(piece, row, col, new_row, new_col):
            self.remove_piece(piece, row, col)
            self.place_piece(piece, new_row, new_col)
            return True
        return False

    def rotate_piece(self, piece, row, col):
        """Rotates the piece if possible."""
        piece.rotate()  # Rotate the piece
        if self.can_move_piece(piece, row, col):
            return True
        else:
            piece.rotate()  # Rotate back if rotation was invalid
            piece.rotate() 
            piece.rotate()
            return False

    def remove_piece(self, piece, row, col):
        """Removes a piece from the board (sets the cells to 0)."""
        for r in range(len(piece.shape)):
            for c in range(len(piece.shape[0])):
                if piece.shape[r][c]:
                    self.grid[row + r][col + c] = 0

    def clear_complete_rows(self):
        """
        Clears any fully completed rows on the board.
        """
        completed_rows = 0
        for row in range(self.HEIGHT):
            if all(self.grid[row]):
                self.grid.pop(row)
                self.grid.insert(0, [0] * self.WIDTH)
                completed_rows += 1
        return completed_rows

Board.py

import random

square = [[1,1],[1,1]]
zig = [[1,1,0],[0,1,1]]
zag = [[0,1,1],[1,1,0]]
tee = [[1,1,1],[0,1,0]]
line = [[1,1,1,1]]
sev = [[0,0,1],[1,1,1]]
ell = [[1,0,0],[1,1,1]]

shapes = [square, zig, zag, tee, line, sev, ell]

class Piece:
    """
    Represents a Tetris piece.
    """

    def __init__(self, shape=None):
        """
        Initializes a new Tetris piece.

        Args:
            shape (list): A 2D list representing the piece shape.
                  Example: [[1, 1, 1],
                            [0, 1, 0]] (T-shaped piece)
        """
        if shape:
            self.shape = shape
        else:
            t = random.randint(0,6)
            self.shape = list(shapes[t])

    def rotate(self):
        """
        Rotates the piece clockwise by 90 degrees.
        """
        self.shape = list(zip(*self.shape[::-1])) 

if __name__ == '__main__':
    # Example usage:
    # Define a T-shaped piece
    t_piece_shape = [
        [1, 1, 1],
        [0, 1, 0]
    ]
    piece = Piece(t_piece_shape)

    print("Original:")
    for row in piece.shape:
        print(row)

    piece.rotate()  # Rotate the piece

    print("\nRotated:")
    for row in piece.shape:
        print(row)