const int sensorPin =A0;
int reading;
float voltage;
float temperatureC;

void setup() {
  // put your setup code here, to run once:
Serial.begin(9600);
}

void loop() {
  // put your main code here, to run repeatedly:
reading =analogRead(sensorPin);
voltage =reading *5.0/1024;
Serial.print(voltage);
Serial.println("volts");
temperatureC =(voltage-0.5)*100;
Serial.println("temperature is: ");
Serial.print(temperatureC);
Serial.println("degrees C");
delay(1000);

}