#include <U8glib.h>
#include "anim.h"

U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_DEV_0 | U8G_I2C_OPT_NO_ACK | U8G_I2C_OPT_FAST); // Fast I2C / TWI
// U8GLIB_SSD1306_128X64 u8g(13, 11, 8, 9, 10); // SPI connection
// for SPI connection, use this wiring:
// GND > GND
// VCC > 5V
// SCL > 13
// SDA > 11
// RES > 10
// DC > 9
// CS > 8



// all the arrays below are generated from images using image2cpp website
// scroll down to see the actual code


#define BUTTON_UP_PIN 12 // pin for UP button 
#define BUTTON_SELECT_PIN 8 // pin for SELECT button
#define BUTTON_DOWN_PIN 4 // pin for DOWN button

#define DEMO_PIN 13 // pin for demo mode, use switch or wire to enable or disable demo mode, see more details below


int button_up_clicked = 0; // only perform action when button is clicked, and wait until another press
int button_select_clicked = 0; // same as above
int button_down_clicked = 0; // same as above

int item_selected = 9; // which item in the menu is selected

int item_sel_previous; // previous item - used in the menu screen to draw the item before the selected one
int item_sel_next; // next item - used in the menu screen to draw next item after the selected one

int current_screen = 0;   // 0 = menu, 1 = screenshot, 2 = qr

int demo_mode = 0; // when demo mode is set to 1, it automatically goes over all the screens, 0 = control menu with buttons
int demo_mode_state = 0; // demo mode state = which screen and menu item to display
int demo_mode_delay = 0; // demo mode delay = used to slow down the screen switching

int Health_stat = 0; // initial value for the health stat
int Accuracy_stat = 0; // initial value for the health stat
int Dexterity_stat = 0; // initial value for the health stat


char Stat_values [21] [3] = {  // array with item names
  { "20" },
  { "19" },
  { "18" },
  { "17" },
  { "16" },
  { "15" },
  { "14" },
  { "13" },
  { "12" },
  { "11" },
  { "10" },
  { "9" },
  { "8" },
  { "7" },
  { "6" },
  { "5" },
  { "4" },
  { "3" },
  { "2" },
  { "1" },
  { "0" }
};



void setup() {
  u8g.setColorIndex(1);  // set the color to white

  // define pins for buttons
  // INPUT_PULLUP means the button is HIGH when not pressed, and LOW when pressed
  // since it´s connected between some pin and GND
  pinMode(BUTTON_UP_PIN, INPUT_PULLUP); // up button
  pinMode(BUTTON_SELECT_PIN, INPUT_PULLUP); // select button
  pinMode(BUTTON_DOWN_PIN, INPUT_PULLUP); // down button

  pinMode(DEMO_PIN, INPUT_PULLUP);
  
}


void loop() {

  // when pin 13 is LOW (DEMO_PIN), enable demo mode
  // this could be done either by using a switch
  // or simply by connecting the wire between pin 13 and GND 
  // (those pins are next to each other)
  if (digitalRead(DEMO_PIN) == LOW) {
    demo_mode = 1; // enable demo mode  
  }
  else  {
    demo_mode = 0; // disable demo mode
  }
    

  if (demo_mode == 1) { // when demo mode is active, automatically switch between all the screens and menu items
    demo_mode_delay++; // increase demo mode delay
    if (demo_mode_delay > 15) { // after some time, switch to another screen - change this value to make it slower/faster
      demo_mode_delay = 0;
      demo_mode_state++; // increase counter
      if (demo_mode_state >= NUM_ITEMS*3) {demo_mode_state=0;} // jump back to the first screen
    }
  
    if (demo_mode_state % 3 == 0) {current_screen = 0; item_selected = demo_mode_state/3; } // menu screen
    else if (demo_mode_state % 3 == 1) {current_screen = 1; item_selected = demo_mode_state/3;} // screenshots screen
    else if (demo_mode_state % 3 == 2) {current_screen = 2; item_selected = demo_mode_state/3;} // qr codes screen

  } // end demo mode section


  if (current_screen == 0) { // MENU SCREEN

      // up and down buttons only work for the menu screen
      if ((digitalRead(BUTTON_UP_PIN) == LOW) && (button_up_clicked == 0)) { // up button clicked - jump to previous menu item
        item_selected = item_selected - 1; // select previous item
        button_up_clicked = 1; // set button to clicked to only perform the action once
        if (item_selected < 8) { // if first item was selected, jump to last item
          item_selected = NUM_ITEMS-1;
        }
      }
      else if ((digitalRead(BUTTON_DOWN_PIN) == LOW) && (button_down_clicked == 0)) { // down button clicked - jump to next menu item
        item_selected = item_selected + 1; // select next item
        button_down_clicked = 1; // set button to clicked to only perform the action once
        if (item_selected >= NUM_ITEMS) { // last item was selected, jump to first menu item
          item_selected = 8;
          }
      } 

      if ((digitalRead(BUTTON_UP_PIN) == HIGH) && (button_up_clicked == 1)) { // unclick 
        button_up_clicked = 0;
      }
      if ((digitalRead(BUTTON_DOWN_PIN) == HIGH) && (button_down_clicked == 1)) { // unclick
        button_down_clicked = 0;
      }

  }







  if (current_screen == 1) { // Stat SCREEN

      // up and down buttons will change the Stat value
      if ((digitalRead(BUTTON_UP_PIN) == LOW) && (button_up_clicked == 0)) { // up button clicked - jump to previous menu item
        if (item_selected == 8) { // if accuracy was selected, increase the value of stat
          Accuracy_stat = Accuracy_stat-1;
          if (Accuracy_stat < 0 ) {
            Accuracy_stat == 21;
          };
        }  
        if (item_selected == 9) { // if accuracy was selected, increase the value of stat
          Health_stat = Health_stat-1;
          if (Health_stat < 0 ) {
            Health_stat == 21;
          };
        }  
        if (item_selected == 10) { // if accuracy was selected, increase the value of stat
          Dexterity_stat = Dexterity_stat-1;
          if (Dexterity_stat < 0 ) {
            Dexterity_stat == 21;
          };
        }  
        button_up_clicked = 1; // set button to clicked to only perform the action once
        




      }
      else if ((digitalRead(BUTTON_DOWN_PIN) == LOW) && (button_down_clicked == 0)) { // down button clicked - jump to next menu item
        if (item_selected == 8 ) {
          Accuracy_stat = Accuracy_stat+1;
          if (Accuracy_stat > 21 ) {
            Accuracy_stat == 0;
          };
        }  
        if (item_selected == 9 ) {
          Health_stat = Health_stat+1;
          if (Health_stat > 21 ) {
            Health_stat == 0;
          };
        }
        if (item_selected == 10 ) {
          Dexterity_stat = Dexterity_stat+1;
          if (Dexterity_stat > 21 ) {
            Dexterity_stat == 0;
           };
        }     
        button_down_clicked = 1; // set button to clicked to only perform the action once
        
      } 

      if ((digitalRead(BUTTON_UP_PIN) == HIGH) && (button_up_clicked == 1)) { // unclick 
        button_up_clicked = 0;
      }
      if ((digitalRead(BUTTON_DOWN_PIN) == HIGH) && (button_down_clicked == 1)) { // unclick
        button_down_clicked = 0;
      }

  }

















  if ((digitalRead(BUTTON_SELECT_PIN) == LOW) && (button_select_clicked == 0)) { // select button clicked, jump between screens
     button_select_clicked = 1; // set button to clicked to only perform the action once
     if (current_screen == 0) {current_screen = 1;} // menu items screen --> screenshots screen
     else {current_screen = 0;} // qr codes screen --> menu items screen
  }
  if ((digitalRead(BUTTON_SELECT_PIN) == HIGH) && (button_select_clicked == 1)) { // unclick 
    button_select_clicked = 0;
  }

  // set correct values for the previous and next items
  item_sel_previous = item_selected - 1;
  if (item_sel_previous < 8) {item_sel_previous = NUM_ITEMS - 1;} // previous item would be below first = make it the last
  item_sel_next = item_selected + 1;  
  if (item_sel_next >= NUM_ITEMS) {item_sel_next = 8;} // next item would be after last = make it the first


  u8g.firstPage(); // required for page drawing mode for u8g library
  do {

      // draw previous item as icon + label
      u8g.setFont(u8g_font_7x14);
      u8g.drawStr(25, 15, menu_items[item_sel_previous]); 
      u8g.drawBitmapP( 4, 2, 16/8, 16, bitmap_icons[item_sel_previous]);          

      // draw selected item as icon + label in bold font
      u8g.setFont(u8g_font_7x14B);    
      u8g.drawStr(25, 15+20+2, menu_items[item_selected]);   
      u8g.drawBitmapP( 4, 24, 16/8, 16, bitmap_icons[item_selected]);     

      // draw next item as icon + label
      u8g.setFont(u8g_font_7x14);     
      u8g.drawStr(25, 15+20+20+2+2, menu_items[item_sel_next]);   
      u8g.drawBitmapP( 4, 46, 16/8, 16, bitmap_icons[item_sel_next]);








      // draw stat values for each item

      if (item_selected == 8) {
        u8g.drawStr(105, 15+20+2 , Stat_values[Accuracy_stat]);
      }
      if (item_sel_previous == 8) {
        u8g.drawStr(105, 15 , Stat_values[Accuracy_stat]);
      }
      if (item_sel_next == 8) {
        u8g.drawStr(105, 15+20+20+2+2 , Stat_values[Accuracy_stat]);
      }

      if (item_selected == 9) {
        u8g.drawStr(105, 15+20+2 , Stat_values[Health_stat]);
      }
      if (item_sel_previous == 9) {
        u8g.drawStr(105, 15 , Stat_values[Health_stat]);
      }
      if (item_sel_next == 9) {
        u8g.drawStr(105, 15+20+20+2+2 , Stat_values[Health_stat]);
      }

      if (item_selected == 10) {
        u8g.drawStr(105, 15+20+2 , Stat_values[Dexterity_stat]);
      }
      if (item_sel_previous == 10) {
        u8g.drawStr(105, 15 , Stat_values[Dexterity_stat]);
      }
      if (item_sel_next == 10) {
        u8g.drawStr(105, 15+20+20+2+2 , Stat_values[Dexterity_stat]);
      }

      










    if (current_screen == 0) { // MENU SCREEN

      // selected item background
      u8g.drawBitmapP(0, 22, 128/8, 21, bitmap_item_sel_outline); 

      // draw scrollbar background
      u8g.drawBitmapP(128-8, 0, 8/8, 64, bitmap_scrollbar_background);

      // draw scrollbar handle
      u8g.drawBox(125, 64/3 * item_selected, 3, 64/3);
      //NUM_ITEMS * item_selected, 3, 64/NUM_ITEMS); when using all items
             

    } 
    else if (current_screen == 1) { // highlight the stat value
        u8g.drawFrame(93, 21, 32 , 22);
        //u8g.drawStr(105, 15+20+2 , Stat_values[item_selected]);
    }


  } while ( u8g.nextPage() ); // required for page drawing mode with u8g library


}