#include <LiquidCrystal_I2C.h>
 
LiquidCrystal_I2C lcd2(0x27,16,2);
const uint8_t buttonPins[] = { 7, 6, 5, 4, 3, 2 };
const int buttonTones[] = { 5, 10, 20, 50, 100, 200 };
int i = 0;
int i2 = -1;
int t = 0;
int t2 = 0;
int time2 = 0;
int lastState[] = { 1, 1, 1, 1, 1, 1 };
int counts[] = { 0, 0, 0, 0, 0, 0 };
byte Spac[] = { 0b01010, 0b00100, 0b01010, 0b00100, 0b01010, 0b00100, 0b01010, 0b00100 };
byte Spac_Max[] = { 0b11111, 0b11111, 0b11111, 0b11111, 0b11111, 0b11111, 0b11111, 0b11111 };
 
#define Ap 10
#define Am 11
#define Bp 9
#define Bm 8
int rotacio = 1; //Motorfordulat gyorsasága
int CountD = 10; //Leállási késleltetés
 
void setup() {
  //Serial.begin(115200);
  lcd2.begin(20, 4);
  lcd2.backlight();
  //lcd.noBacklight();
  for (uint8_t i = 0; i < 6; i++) { pinMode(buttonPins[i], INPUT_PULLUP); }
  showSpalshScreen();
  lcd2.createChar(0, Spac);
  lcd2.createChar(5, Spac_Max);
  t2 = millis();
  pinMode(Ap,OUTPUT);  pinMode(Am,OUTPUT);
  pinMode(Bp,OUTPUT);  pinMode(Bm,OUTPUT);
  }
 
void showSpalshScreen() {
  lcd2.setCursor(1, 1);
  String message = "Coin Counter v1.0";
  for (byte i = 0; i < message.length(); i++) {
    lcd2.print(message[i]);
    delay(100);
  }
  delay(1000);
  lcd2.clear();
  digitalWrite(8, LOW);
}

void loop() {
  if (time2 != (CountD - 1)) {
    delay(rotacio);
    digitalWrite(Bm,LOW) ;  digitalWrite(Ap,HIGH);
    delay(rotacio);
    digitalWrite(Ap,LOW) ;  digitalWrite(Bp,HIGH);
    delay(rotacio);
    digitalWrite(Bp,LOW) ;  digitalWrite(Am,HIGH);
    delay(rotacio);
    digitalWrite(Am,LOW) ;  digitalWrite(Bm,HIGH);
    time2 = (millis() - t2) /1000 % CountD;
    if (t != time2) {
      t = time2;
      //Serial.println(time2);
    }
 
    for (uint8_t x = 0; x < 6; x++) {
      int value = digitalRead((buttonPins[x]));
      if (lastState[x] != value) {
        lastState[x] = value;
        if (value == HIGH) {
          i += buttonTones[x];
          counts[x] ++;
          t2 = millis();
          }
      }
    }
 
  if (i != i2) {
    i2 = i;
 
    lcd2.setCursor(0, 0);
    lcd2.print(String(" 5: ") + String(counts[0]));
    lcd2.setCursor(9, 0);
    lcd2.write(byte(0));
    lcd2.print(String("  50: ") + String(counts[3]));
 
    lcd2.setCursor(0, 1);
    lcd2.print(String("10: ") + String(counts[1]));
    lcd2.setCursor(9, 1);
    lcd2.write(byte(0));
    lcd2.print(String(" 100: ") + String(counts[4]));
 
    lcd2.setCursor(0, 2);
    lcd2.print(String("20: ") + String(counts[2]));
    lcd2.setCursor(9, 2);
    lcd2.write(byte(0));
    lcd2.print(String(" 200: ") + String(counts[5]));
 
    lcd2.setCursor(0, 3);
    lcd2.print(String("\357sszeg: ") + String(i) + String(" Ft"));
    }
  lcd2.setCursor(17, 3);
  lcd2.print(String(" ") + String(CountD - 1 - time2) + String(" "));
  }
}