#include <WiFi.h>
#include <PubSubClient.h>

// Update these with values suitable for your network.

const char* ssid = "Wokwi-GUEST";
const char* password = "........";
const char* mqtt_server = "test.mosquitto.org";

WiFiClient wokwi_client;
PubSubClient client(wokwi_client);

void setup_wifi() {

  delay(10);
  // We start by connecting to a WiFi network
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);

  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  randomSeed(micros());

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}


void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Create a random client ID
    String clientId = "ESP8266Client-";
    clientId += String(random(0xffff), HEX);
    // Attempt to connect
    if (client.connect ("wokwi_client")) {
      Serial.println("connected");
      // Once connected, publish an announcement...
      client.publish("outTopic", "hello world");
      // ... and resubscribe
      client.subscribe("inTopic");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}

void setup() {
  pinMode(2, OUTPUT); 
  pinMode(15, OUTPUT);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
}

void wifi_connected(){
  if (WiFi.status()){
    digitalWrite(2, HIGH);
  } else {
    digitalWrite(2, LOW);
  }
}
void mosquitto_connected(){
    if (client.connected()){
      digitalWrite(15, HIGH);
    } else {
      digitalWrite(15, LOW);
    }
}

void loop() {
  reconnect();
}