// Stepper motor on Wokwi!

#include <Stepper.h>

const int stepsPerRevolution = 200; // change this to fit the number of
// for your motor

// initialize the stepper library on pins 8 through 11:
Stepper myStepper(stepsPerRevolution, 8,9,10,11);

void setup() {
  // set the speed at 60 rpm:
myStepper.setSpeed (60) ;
// initialize the serial port:
Serial.begin (9600);
}

void loop() {
  // step one revolution in one direction:
Serial.println("clockwise");
myStepper.step(stepsPerRevolution);
delay (500)

// step one revolution in other direction:
;Serial.println("counterclockwise");
myStepper.step(-stepsPerRevolution);
delay (500);
}