#include <LiquidCrystal_I2C.h>
int lcdCol = 16;
int lcdRow = 2;
int pir_pin = 14;
LiquidCrystal_I2C lcd(0x27, lcdCol, lcdRow);
void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  pinMode(pir_pin, INPUT);
  lcd.init();
  lcd.backlight();
}

void loop() {
  int state = digitalRead(pir_pin);
  
  if(state == 0){
    lcd.setCursor(0,0);
    lcd.print("Motion is Detected");
    Serial.println("Motion is Detected");
   
  
  } 
  else{
    lcd.setCursor(0,0);
    lcd.print("Motion is not detected");
    Serial.println("Motion is not detected");
  }
  
}