/* Arduino WaveHC Library Runshaw Custom board */ //#ifndef test2_h //#define test2_h #include #define SCREEN_WIDTH 128 // OLED display width, in pixels #define SCREEN_HEIGHT 64 // OLED display height, in pixels #define OLED_RESET 4 // Reset pin # (or -1 if sharing Arduino reset pin) #define SCREEN_ADDRESS 0x3C // This oled requires 0x3C address set Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, OLED_RESET); char buffer[40]; int zcounter = 0; int long myTime; int long myCOUNT; int mytoutputs[13]; //12 cursor outputs int myboutputs[13]; //12 bar outputs int outs = HIGH; void setup_oled() { int x; while (!display.begin(SSD1306_SWITCHCAPVCC, SCREEN_ADDRESS)) { ; // loop here while the oled initializes } display.setTextSize(1); // single size font pixel scale //display.setFont(ssd1306xled_font6x8 ); display.setTextColor(SSD1306_WHITE); // Draw white text for (x = 2; x < 14; x++) { pinMode(x, OUTPUT); //default outputs digitalWrite(x, LOW); //default low } for (x = 14; x < 22; x++) pinMode(x, INPUT_PULLUP); //default inputs for (x = 2; x < 5; x++) { mytoutputs[x] = 136 - 9 * x; myboutputs[x] = 136 - 9 * x; } mytoutputs[6] = 80; myboutputs[6] = 80; for (x = 8; x < 10; x++) { mytoutputs[x] = 139 - 10 * x; myboutputs[x] = 139 - 10 * x; } for (x = 10; x < 13; x++) { mytoutputs[x] = 191 - 16 * x; myboutputs[x] = 192 - 16 * x; } } void oled_monitor(int cur) { int x, t1, t2, t3, divy = 80; display.setTextSize(1); // larger font size 2 display.setTextSize(2); display.setCursor(1, cur); // put the defaul text on display.print(buffer); // Print Hello World to the oled display display.setTextSize(1); // larger font size 2 for (x = 2; x < 5; x++) { display.setCursor(mytoutputs[x], 7); display.print(x); // Print Hello World to the oled display if (digitalRead(x) > 0) display.fillRect(myboutputs[x], 4, 6, 2, SSD1306_WHITE); } // pin 6 display.setCursor(mytoutputs[6], 3); display.print(6); // Print Hello World to the oled display if (digitalRead(6) > 0) display.fillRect(myboutputs[6], 0, 6, 2, SSD1306_WHITE); for (x = 8; x < 10; x++) { display.setCursor(mytoutputs[x], 5); display.print(x); // Print Hello World to the oled display if (digitalRead(x) > 0) display.fillRect(myboutputs[x], 2, 6, 2, SSD1306_WHITE); } for (x = 10; x < 13; x++) { display.setCursor(mytoutputs[x], 5); display.print(x); // Print Hello World to the oled display if (digitalRead(x) > 0) display.fillRect(myboutputs[x], 2, 9, 2, SSD1306_WHITE); } if (outs == HIGH) { for (x = 14; x < 22; x++) { int z0, rd, offs; z0 = x - 14; offs = 1; if (z0 > 1) offs = -12; if (z0 > 4) offs = -40; if (z0 != 1) { display.setCursor(offs + 2 + 19 * z0, 54); //if you want to show A0 to A7 if (z0 < 4) display.print(z0); // Print Hello World to the oled display; if (z0 > 5) display.print(z0); // Print Hello World to the oled display; } rd = analogRead(x) + divy; // get the value if (z0 == 1) rd = 0 ; //disable that pin, its A1 and not connected if (z0 == 4) rd = 0 ; //disable that pin, its the oled if (z0 == 5) rd = 0 ; //disable that pin, its the oled //display the input states with rectangle display.fillRect(offs + 19 * z0, 63, rd / divy, 1, SSD1306_WHITE); delay(1); } } display.display(); // Must send this to update the display } void OLED_SENSOR(char x[20], int q) { //update the buffer only - this will ALWAYS be displayed sprintf(buffer, "%s: %d", x, q); //now use text as string } void OLED_PRINT(char x[20]) { //update the buffer only - this will ALWAYS be displayed sprintf(buffer, "%s", x); //now use text as string } void sdelay(int x) { int diff; myTime = millis(); oled_monitor(20); while (diff < x) { diff = millis() - myTime ; } display.clearDisplay(); // Clear the display } int counter() { //oled_monitor(); int t; t = myCOUNT - millis(); return t; } int setcounter(int x) { myCOUNT = millis() + x; return myCOUNT ; }