#define BLYNK_TEMPLATE_ID "TMPL6AQj0v1dj"
#define BLYNK_TEMPLATE_NAME "IoT Tugas 1"
#define BLYNK_AUTH_TOKEN "tf1lyWzGp7A3o0GoAbjn6lPE7_eddArQ"


// Define pin connections
#define LED_PIN 2       // GPIO pin connected to the LED
#define BUZZER_PIN 15   // GPIO pin connected to the Buzzer
#define RELAY_PIN 5     // GPIO pin connected to the Relay

void setup() {
  // Initialize the pins as output
  pinMode(LED_PIN, OUTPUT);     
  pinMode(BUZZER_PIN, OUTPUT);  
  pinMode(RELAY_PIN, OUTPUT);   
}

void loop() {
  // Turn on LED, Buzzer, and activate Relay
  digitalWrite(LED_PIN, HIGH);      // Turn on LED
  tone(BUZZER_PIN, 1000);           // Play 1kHz tone on Buzzer
  digitalWrite(RELAY_PIN, HIGH);    // Activate the relay
  
  delay(1000);                      // Wait for 1 second
  
  // Turn off LED, Buzzer, and deactivate Relay
  digitalWrite(LED_PIN, LOW);       // Turn off LED
  noTone(BUZZER_PIN);               // Stop the Buzzer
  digitalWrite(RELAY_PIN, LOW);     // Deactivate the relay
  
  delay(1000);                      // Wait for 1 second
}