#include <ArduinoJson.h>
#include <PubSubClient.h>
#include "DHTesp.h"
#include <WiFi.h>
//#include <ThingsBoard.h>
#include <ESP32Servo.h> 



#define WIFI_AP "Wokwi-GUEST"
#define WIFI_PASSWORD ""
#define TOKEN          "8o2xinsbj7y6cw379yak" // 

Servo myservo;
StaticJsonDocument<200> doc;
StaticJsonDocument<200> doc2;
const int DHT_PIN = 15;
DHTesp dhtSensor;
String m_luces = "";
char buffer2[300];
int status = WL_IDLE_STATUS;
String sr2 = "";
char rec[50];
String inputString = "";
float gf = 0.0, vel = 0.0;
int gi = 0;
char thingsboardServer[] = "demo.thingsboard.io";

WiFiClient espClient;

PubSubClient client(espClient);



void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    status = WiFi.status();
    if ( status != WL_CONNECTED) {
      WiFi.begin(WIFI_AP, WIFI_PASSWORD);
      while (WiFi.status() != WL_CONNECTED) {
        delay(500);
        Serial.print(".");
      }
      Serial.println("Connected to AP");
    }
    Serial.print("CONECTANDO...");
   

    // Attempt to connect (clientId, username, password)
    if ( client.connect("sensor", TOKEN, NULL) ) {
      Serial.println( "CONECTADO" );
     
      delay(2000);


      // Subscribing to receive RPC requests
      client.subscribe("v1/devices/me/rpc/request/+");

    } else {
      Serial.print( "[FAILED] [ rc = " );
      Serial.print( client.state() );
      Serial.println( " : retrying in 5 seconds]" );
      // Wait 5 seconds before retrying
      
      delay( 1000 );
    }
  }
}



void setup() {
  Serial.begin(115200);
  Serial.println();
  pinMode(2, OUTPUT);
  pinMode(5, OUTPUT);
  myservo.setPeriodHertz(50);// Standard 50hz servo
  myservo.attach(13, 500, 2400); 
  client.setServer( thingsboardServer, 1883 );
  client.setCallback(callback);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
}

void loop() {

  if ( !client.connected() ) {
    reconnect();
  }

  client.loop();
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();

  doc["Temp"] = data.temperature;
  doc["Hum"] = data.humidity;
  char buffer[300];
  serializeJson(doc, buffer);
  client.publish("v1/devices/me/attributes",buffer);
  delay(2000);
}

void callback(char* topic, byte* payload, unsigned int length) {


  sr2 = "";
  for (int i = 0; i < length; i++) {
    Serial.print((char)payload[i]);
    rec[i] = payload[i];
    sr2 += rec[i];
    inputString = sr2;

  }

  char msg2[inputString.length()];
  Serial.println(msg2);
  inputString.toCharArray(msg2, inputString.length() + 1);
  StaticJsonDocument<200> doc2;
  
  DeserializationError error = deserializeJson(doc2, msg2);

  // Test if parsing succeeds.
  if (error) {
    Serial.print(F("deserializeJson() failed: "));
    Serial.println(error.f_str());
    return;
  }

  String  value = doc2["params"];
  String  method_ = doc2["method"];

  if (method_.equals("setValue")) {
    if (value.equals("false"))
    {
      digitalWrite(2, LOW);

    }
    if (value.equals("true")) {

      digitalWrite(2, HIGH);
      
    }
     

  }

  if (method_.equals("setServo")) {
    Serial.println(value);
    Serial.println(method_);
    int val_aux=value.toInt();
    int val = map(val_aux, 0, 100, 0, 180);
    myservo.write(val);

    
  }
  if (method_.equals("setwater")) {
    Serial.println(value);
    Serial.println(method_);

    if (value.equals("false"))
    {
      digitalWrite(5, LOW);
      
    }
    if (value.equals("true")) {

      digitalWrite(5, HIGH);
      

    }

  }

}