#include <WiFi.h>

byte piros = 13;
byte zold = 12;
byte kek = 14;

// Replace with your network credentials (STATION)
#define ssid "Wokwi-GUEST"
#define password ""


void initWiFi() {
  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);
  // WiFi.begin("Wokwi-GUEST", "");
  Serial.print("Connecting to WiFi ..");
  while (WiFi.status() != WL_CONNECTED) {
    Serial.println(WiFi.status());
    Serial.print('.');
    delay(1000);
  }
  Serial.println("Connected");
  Serial.println(WiFi.status());
  Serial.println(WiFi.localIP());
  Serial.print("RRSI: ");
  Serial.println(WiFi.RSSI());

}

void setup() {
  Serial.begin(115200);
  initWiFi();
  pinMode(piros, OUTPUT);
  pinMode(zold, OUTPUT);
  pinMode(kek, OUTPUT);
}

void allapot()
{
  if (WiFi.status() == 6)
  {
    digitalWrite(piros, HIGH);
    digitalWrite(zold, LOW);
    digitalWrite(kek, LOW);
    Serial.println(WiFi.status());
    delay(1000);
  }
  if (WiFi.status() == 3)
  {
   digitalWrite(piros, LOW);
   digitalWrite(zold, HIGH);
   digitalWrite(kek, LOW);
  Serial.println(WiFi.status());
  delay(1000);
  }
  if (WiFi.status() != 3)
  {
    initWiFi();
    delay(1000);
  }
  if ((WiFi.status() == 255) || (WiFi.status() == 0) || (WiFi.status() == 1) || (WiFi.status() == 2) || (WiFi.status() == 4) || (WiFi.status() == 5))
  {
    digitalWrite(piros, LOW);
    digitalWrite(zold, LOW);
    digitalWrite(kek, HIGH);
    Serial.println(WiFi.status());
    delay(1000);
  }
}

void loop() 
{
  allapot();
}

/*
WL_NO_SHIELD	        255
WL_IDLE_STATUS	      0
WL_NO_SSID_AVAIL	    1
WL_SCAN_COMPLETED	    2
WL_CONNECTED	        3
WL_CONNECT_FAILED	    4
WL_CONNECTION_LOST	  5
WL_DISCONNECTED	      6 
*/