//#include <ESP8266WiFi.h>
#include <WiFi.h>
#include <PubSubClient.h>
#include "DHTesp.h"

//porta do sensor
const int DHT_PIN = 23;

//variável com o valor do sensor
DHTesp dhtSensor;



// credencias para acesso a rede e ao MQTT mosquito
// o nosso broker é o mosquito: broker.mqtt-dashboard.com




const char* ssid = "Wokwi-GUEST";
const char* password = "";
const char* mqtt_server = "test.mosquitto.org";








WiFiClient WOKWI_client;
PubSubClient client(WOKWI_client);








void setup_wifi() {




  delay(10);
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);




  WiFi.mode(WIFI_STA);
  WiFi.begin(ssid, password);




  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }








  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
}



void reconnect() {
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
   
    if (client.connect("WOKWI_client")) {
      Serial.println("connected");
     
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}




void setup() { 
  Serial.begin(115200);
  setup_wifi();
  client.setServer(mqtt_server, 1883);
  //realizando o setup do dhtpsensor
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);
}




void Conectado_Wifi(){
  if (WiFi.status())
  digitalWrite(2, HIGH);
  else
  digitalWrite(2, LOW);
}
void Conectado_Mosquito(){
  if (client.connected())
  digitalWrite(15, HIGH);
  else
  digitalWrite(15, LOW);
}



void envio_temp() {
  //pegando a temperatura e humidade
  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  //enviando a temperatura especificamente
  client.publish("TOPICO_CALDEIRA_2",String(data.temperature).c_str());
  //testes para printar condições atuais da temperatura
  if(data.temperature<40){
    Serial.println("ineficiências");
  }else if(data.temperature <55){
    Serial.println("ideal");
  }else{
    Serial.println("alarmante");
  }
  //escrevendo o valor da temperatura

  Serial.println("Temp: " + String(data.temperature, 2) + "°C");
  Serial.println("---");
  delay(2000); //delay de 2 segundos
}


void loop() {
    reconnect();
    Conectado_Wifi();
    Conectado_Mosquito();
    envio_temp();
}