#include <GyverOLED.h>
GyverOLED<SSD1306_128x64, OLED_NO_BUFFER> oled;

//https://github.com/AlexGyver/imageProcessor
const uint8_t bitmap_32x32[] PROGMEM = {
  0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xC0, 0xE0, 0xF0, 0x70, 0x70, 0x30, 0x30, 0x30, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF0, 0x70, 0x30, 0x30, 0x20, 0x00, 0x00,
  0x00, 0x30, 0x78, 0xFC, 0x7F, 0x3F, 0x0F, 0x0F, 0x1F, 0x3C, 0x78, 0xF0, 0xE0, 0xC0, 0x80, 0x80, 0x80, 0x40, 0xE0, 0xF0, 0xF8, 0xFC, 0xFF, 0x7F, 0x33, 0x13, 0x1E, 0x1C, 0x1C, 0x0E, 0x07, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xF0, 0xF9, 0xF7, 0xEF, 0x5F, 0x3F, 0x7F, 0xFE, 0xFD, 0xFB, 0xF1, 0xE0, 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
  0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x1E, 0x33, 0x33, 0x1F, 0x0F, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0F, 0x1F, 0x3F, 0x1F, 0x0E, 0x04, 0x00, 0x00, 0x00, 0x00,
};

void setup() {
  /*oled.init();
  oled.clear();
  oled.setScale(3);
  oled.home(); 
  oled.print("Hello!");
  delay(1000);
  oled.setScale(1);
  oled.setCursor(0, 3);
  oled.print("IoT AKas");
  oled.setCursorXY(20, 50);
  float pi = 3.14;
  oled.print("PI = ");
  oled.print(pi);*/

  /*oled.init();
  oled.clear();
  oled.home();
  oled.setScale(1);
  oled.invertText(false);
  oled.autoPrintln(true);   // автоматически переносить текст
  oled.print(F("Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam"));
  oled.update();*/

  oled.init();  // инициализация
  oled.clear();   // очистить дисплей (или буфер)
  oled.drawBitmap(16, 16, bitmap_32x32, 32, 32, BITMAP_NORMAL, BUF_ADD);
  oled.update();
}

void loop() {
  // put your main code here, to run repeatedly:

}