#include <IRremote.h>
#include <Servo.h>
#include <FastLED.h>
CRGB leds[0];
int pin_receiver = 2;
int button_value = 0;
int bright = 20;

Servo myservo1;
IRrecv receiver(pin_receiver);

void setup()
{
  receiver.enableIRIn();   
  myservo1.attach(10);
  Serial.begin(9600); 
  FastLED.addLeds<NEOPIXEL, 3>(leds, 1);
}

void loop()
{
  if (receiver.decode()) 
  {
    translateIR();
    receiver.resume();  
  }
}

void translateIR()
{
  button_value = receiver.decodedIRData.command;
  if(button_value == 226) {
    Serial.println("Forward: Driver Door opens, Backward: Driver Door Close, 1: RED light on, 2: GREEN light on, 3: BLUE light on, 4: Blinking LEDs, Play: Control LED Glow, 9: All stop");

  }
  if(button_value == 224) {
    Serial.println("Door opening ...");
    myservo1.write(180);
    Serial.println("Door opened!! ^^");
  } 
  if(button_value == 194) {
    Serial.println("Door closing ...");
    myservo1.write(-180);
    Serial.println("Door closed!! ^^");
  } 
  if(button_value == 48) {
    Serial.println("Becoming ... REDDD");
    leds[1] = CRGB(198, 86, 82);
    FastLED.show();
  }
  if(button_value == 24) {
    Serial.println("Becoming ... GREEEN");
    leds[1] = CRGB(228, 249, 183);
    FastLED.show();
  }
  if(button_value == 122) {
    Serial.println("Becoming ... BLUUUEEE");
    leds[1] = CRGB(22, 28, 73);
    FastLED.show();
  }
  if(button_value == 16) {
    for(int i = 0; i<=20; i++) {
      leds[1] = CRGB(22, 28, 73);
      FastLED.show();
      delay(50);
      leds[1] = CRGB(228, 249, 183);
      FastLED.show();
      delay(50);
      leds[1] = CRGB(198, 86, 82);
      FastLED.show();
      delay(50);
    }
  }

  if(button_value == 168) {
    bright = bright+40;
    FastLED.setBrightness(bright);
    FastLED.show();
  }

  if(button_value ==82) {
    Serial.println("Application Stopped");
    myservo1.write(90);
    FastLED.clear();
    FastLED.show();
  }
}