# from machine import Pin, I2C: Imports the Pin and I2C classes from the machine module,
# which are used to control the GPIO pins and
# I2C communication on the microcontroller. I2C i.e IIC stands for inter-IC
# from time import sleep: Imports the sleep function from the time module,
# which is used to pause the program for a specified number of seconds.
#from pico_i2c_Icd import l2cLcd: Imports the l2dLcd class from the pico_i2c_lcd module,
# which is used to control an LCD display via I2C.

# modules
from machine import Pin, I2C
from time import sleep

from pico_i2c_lcd import I2cLcd

i2c=I2C(0,sda=Pin(0), scl=Pin(1), freq=400000)

# Initializes the I2C interface on the microcontroller. It uses I2C bus 0,
# with the SDA (data) line connected to GPIO pin 0 and the SCL (clock) line connected to GPIO pin 1
# The communication frequency is set to 400 kHz.

I2C_ADDR=i2c.scan()[0]

# Scans the I2C bus for connected devices and retrieves the address of the first device found.
# This address is stored in the I2C_ADDR variable.

#create instance for LCD
lcd=l2cLcd(i2c,I2C_ADDR,2,16)

#LOOP
while True:
    lcd.putstr("Hello Students")
    sleep(5)
    lcd.clear()

    #while True :: Starts an infinite loop.
    #lcd.putstr("Hello eighta"):Displays the string:Hello eighta" on the LCD.
    #sleep(5):Pauses the program for 5 seconds.
    #lcd.clear():Clears the display on the LCD.