#include "DHTesp.h"
#include <Adafruit_SSD1306.h>
#include <Adafruit_GFX.h>
#include <Wire.h>

#define LED 2
#define LED_MAN_AUTO 5
#define LED_LDR 18
#define SW1 4
#define SW2 16
#define LDR 13
#define DHT_PIN 15
#define SCREEN_WIDTH 128
#define SCREEN_HEIGHT 64
DHTesp dhtSensor;
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire);

void setup() {
  Serial.begin(115200);
  pinMode(LED, OUTPUT);
  pinMode(LED_MAN_AUTO, OUTPUT);
  pinMode(LED_LDR, OUTPUT);
  pinMode(SW1, INPUT_PULLUP);
  pinMode(SW2, INPUT_PULLUP);
  dhtSensor.setup(DHT_PIN, DHTesp::DHT22);

}
int currentTime = 0;
int lastTime = 0;

int currentTime2 = 0;
int lastTime2 = 0;

long ldr_val = 0;
int conv = 0;
void loop() {
  ldr_val = analogRead(LDR);
  conv = ldr_val * 255 / 4093;
  analogWrite(LED_LDR, conv);


  TempAndHumidity  data = dhtSensor.getTempAndHumidity();
  display.display();
  display.clearDisplay();
  display.setTextSize(2);
  display.setTextColor(WHITE);
  display.setCursor(0, 0);
  display.setTextSize(1);
  display.print(F("LDR_VAL(CONV):"));
  display.print(conv);
  // display.setCursor(0, 16);
  // display.print(F("TEMP:"));
  // display.print(data.temperature);
  // display.print(F("Humi:"));
  // display.print(data.humidity);
  display.display();

  //SOL : 1
  currentTime = millis();
  if (currentTime - lastTime >= 1000) {
    lastTime = currentTime;
    digitalWrite(LED, !digitalRead(LED));
    Serial.print("LDR_VAL: ");
    Serial.println(ldr_val);

    Serial.println("Temp: " + String(data.temperature, 2) + "°C");
    Serial.println("Humidity: " + String(data.humidity, 1) + "%");

  }

  //SOL : 2
  if (digitalRead(SW1)) {
    //Serial.println("MODE: AUTO");
    currentTime2 = millis();
    if (currentTime2 - lastTime2 >= 1000) {
      lastTime2 = currentTime2;
      digitalWrite(LED_MAN_AUTO, !digitalRead(LED_MAN_AUTO));
    }



  } else {

    //Serial.println("MODE: MANUAL");
    if (digitalRead(SW2)) {
      digitalWrite(LED_MAN_AUTO, !digitalRead(LED_MAN_AUTO));
    }

  }




}