import machine
from machine import Pin, SoftI2C
import sh1106
from time import sleep
i2c = machine.SoftI2C(scl=machine.Pin(5), sda=machine.Pin(4))
pin = machine.Pin(16, machine.Pin.OUT)
pin.value(0) 
pin.value(1) 
oled_width = 128
oled_height = 64
oled = ssd1306.SSD1306_I2C(oled_width, oled_height, i2c)
oled.fill(0)
oled.text("hello", 0, 10)
oled.show()

main.py

diagram.json

ssd1306.py

#
# MicroPython SH1106 OLED driver, I2C and SPI interfaces
#
# The MIT License (MIT)
#
# Copyright (c) 2016 Radomir Dopieralski (@deshipu),
#               2017-2021 Robert Hammelrath (@robert-hh)
#               2021 Tim Weber (@scy)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
# Sample code sections for ESP8266 pin assignments
# ------------ SPI ------------------
# Pin Map SPI
#   - 3v - xxxxxx   - Vcc
#   - G  - xxxxxx   - Gnd
#   - D7 - GPIO 13  - Din / MOSI fixed
#   - D5 - GPIO 14  - Clk / Sck fixed
#   - D8 - GPIO 4   - CS (optional, if the only connected device)
#   - D2 - GPIO 5   - D/C
#   - D1 - GPIO 2   - Res
#
# for CS, D/C and Res other ports may be chosen.
#
# from machine import Pin, SPI
# import sh1106

# spi = SPI(1, baudrate=1000000)
# display = sh1106.SH1106_SPI(128, 64, spi, Pin(5), Pin(2), Pin(4))
# display.sleep(False)
# display.fill(0)
# display.text('Testing 1', 0, 0, 1)
# display.show()
#
# --------------- I2C ------------------
#
# Pin Map I2C
#   - 3v - xxxxxx   - Vcc
#   - G  - xxxxxx   - Gnd
#   - D2 - GPIO 5   - SCK / SCL
#   - D1 - GPIO 4   - DIN / SDA
#   - D0 - GPIO 16  - Res
#   - G  - xxxxxx     CS
#   - G  - xxxxxx     D/C
#
# Pin's for I2C can be set almost arbitrary
#
# from machine import Pin, I2C
# import sh1106
#
# i2c = I2C(scl=Pin(5), sda=Pin(4), freq=400000)
# display = sh1106.SH1106_I2C(128, 64, i2c, Pin(16), 0x3c)
# display.sleep(False)
# display.fill(0)
# display.text('Testing 1', 0, 0, 1)
# display.show()
  
from micropython import const
import utime as time
import framebuf
  
# a few register definitions
_SET_CONTRAST        = const(0x81)
_SET_NORM_INV        = const(0xa6)
_SET_DISP            = const(0xae)
_SET_SCAN_DIR        = const(0xc0)
_SET_SEG_REMAP       = const(0xa0)
_LOW_COLUMN_ADDRESS  = const(0x00)
_HIGH_COLUMN_ADDRESS = const(0x10)
_SET_PAGE_ADDRESS    = const(0xB0)
  
class SH1106(framebuf.FrameBuffer):
  
    def __init__(self, width, height, external_vcc, rotate=0):
        self.width = width
        self.height = height
        self.external_vcc = external_vcc
        self.flip_en = rotate == 180 or rotate == 270
        self.rotate90 = rotate == 90 or rotate == 270
        self.pages = self.height // 8
        self.bufsize = self.pages * self.width
        self.renderbuf = bytearray(self.bufsize)
        self.pages_to_update = 0
  
        if self.rotate90:
            self.displaybuf = bytearray(self.bufsize)
            # HMSB is required to keep the bit order in the render buffer
            # compatible with byte-for-byte remapping to the display buffer,
            # which is in VLSB. Else we'd have to copy bit-by-bit!
            super().__init__(self.renderbuf, self.height, self.width,
                             framebuf.MONO_HMSB)
        else:
            self.displaybuf = self.renderbuf
            super().__init__(self.renderbuf, self.width, self.height,
                             framebuf.MONO_VLSB)
  
        # flip() was called rotate() once, provide backwards compatibility.
        self.rotate = self.flip
        self.init_display()
  
    def init_display(self):
        self.reset()
        self.fill(0)
        self.show()
        self.poweron()
        # rotate90 requires a call to flip() for setting up.
        self.flip(self.flip_en)
  
    def poweroff(self):
        self.write_cmd(_SET_DISP | 0x00)
  
    def poweron(self):
        self.write_cmd(_SET_DISP | 0x01)
        if self.delay:
            time.sleep_ms(self.delay)
  
    def flip(self, flag=None, update=True):
        if flag is None:
            flag = not self.flip_en
        mir_v = flag ^ self.rotate90
        mir_h = flag
        self.write_cmd(_SET_SEG_REMAP | (0x01 if mir_v else 0x00))
        self.write_cmd(_SET_SCAN_DIR | (0x08 if mir_h else 0x00))
        self.flip_en = flag
        if update:
            self.show(True) # full update
  
    def sleep(self, value):
        self.write_cmd(_SET_DISP | (not value))
  
    def contrast(self, contrast):
        self.write_cmd(_SET_CONTRAST)
        self.write_cmd(contrast)
  
    def invert(self, invert):
        self.write_cmd(_SET_NORM_INV | (invert & 1))
  
    def show(self, full_update = False):
        # self.* lookups in loops take significant time (~4fps).
        (w, p, db, rb) = (self.width, self.pages,
                          self.displaybuf, self.renderbuf)
        if self.rotate90:
            for i in range(self.bufsize):
                db[w * (i % p) + (i // p)] = rb[i]
        if full_update:
            pages_to_update = (1 << self.pages) - 1
        else:
            pages_to_update = self.pages_to_update
        #print("Updating pages: {:08b}".format(pages_to_update))
        for page in range(self.pages):
            if (pages_to_update & (1 << page)):
                self.write_cmd(_SET_PAGE_ADDRESS | page)
                self.write_cmd(_LOW_COLUMN_ADDRESS | 2)
                self.write_cmd(_HIGH_COLUMN_ADDRESS | 0)
                self.write_data(db[(w*page):(w*page+w)])
        self.pages_to_update = 0
  
    def pixel(self, x, y, color=None):
        if color is None:
            return super().pixel(x, y)
        else:
            super().pixel(x, y , color)
            page = y // 8
            self.pages_to_update |= 1 << page
  
    def text(self, text, x, y, color=1):
        super().text(text, x, y, color)
        self.register_updates(y, y+7)
  
    def line(self, x0, y0, x1, y1, color):
        super().line(x0, y0, x1, y1, color)
        self.register_updates(y0, y1)
  
    def hline(self, x, y, w, color):
        super().hline(x, y, w, color)
        self.register_updates(y)
  
    def vline(self, x, y, h, color):
        super().vline(x, y, h, color)
        self.register_updates(y, y+h-1)
  
    def fill(self, color):
        super().fill(color)
        self.pages_to_update = (1 << self.pages) - 1
  
    def blit(self, fbuf, x, y, key=-1, palette=None):
        super().blit(fbuf, x, y, key, palette)
        self.register_updates(y, y+self.height)
  
    def scroll(self, x, y):
        # my understanding is that scroll() does a full screen change
        super().scroll(x, y)
        self.pages_to_update =  (1 << self.pages) - 1
  
    def fill_rect(self, x, y, w, h, color):
        super().fill_rect(x, y, w, h, color)
        self.register_updates(y, y+h-1)
  
    def rect(self, x, y, w, h, color):
        super().rect(x, y, w, h, color)
        self.register_updates(y, y+h-1)
  
    def register_updates(self, y0, y1=None):
        # this function takes the top and optional bottom address of the changes made
        # and updates the pages_to_change list with any changed pages
        # that are not yet on the list
        start_page = max(0, y0 // 8)
        end_page = max(0, y1 // 8) if y1 is not None else start_page
        # rearrange start_page and end_page if coordinates were given from bottom to top
        if start_page > end_page:
            start_page, end_page = end_page, start_page
        for page in range(start_page, end_page+1):
            self.pages_to_update |= 1 << page
  
    def reset(self, res):
        if res is not None:
            res(1)
            time.sleep_ms(1)
            res(0)
            time.sleep_ms(20)
            res(1)
            time.sleep_ms(20)
  
class SH1106_I2C(SH1106):
    def __init__(self, width, height, i2c, res=None, addr=0x3c,
                 rotate=0, external_vcc=False, delay=0):
        self.i2c = i2c
        self.addr = addr
        self.res = res
        self.temp = bytearray(2)
        self.delay = delay
        if res is not None:
            res.init(res.OUT, value=1)
        super().__init__(width, height, external_vcc, rotate)
  
    def write_cmd(self, cmd):
        self.temp[0] = 0x80  # Co=1, D/C#=0
        self.temp[1] = cmd
        self.i2c.writeto(self.addr, self.temp)
  
    def write_data(self, buf):
        self.i2c.writeto(self.addr, b'\x40'+buf)
  
    def reset(self):
        super().reset(self.res)
  
class SH1106_SPI(SH1106):
    def __init__(self, width, height, spi, dc, res=None, cs=None,
                 rotate=0, external_vcc=False, delay=0):
        dc.init(dc.OUT, value=0)
        if res is not None:
            res.init(res.OUT, value=0)
        if cs is not None:
            cs.init(cs.OUT, value=1)
        self.spi = spi
        self.dc = dc
        self.res = res
        self.cs = cs
        self.delay = delay
        super().__init__(width, height, external_vcc, rotate)
  
    def write_cmd(self, cmd):
        if self.cs is not None:
            self.cs(1)
            self.dc(0)
            self.cs(0)
            self.spi.write(bytearray([cmd]))
            self.cs(1)
        else:
            self.dc(0)
            self.spi.write(bytearray([cmd]))
  
    def write_data(self, buf):
        if self.cs is not None:
            self.cs(1)
            self.dc(1)
            self.cs(0)
            self.spi.write(buf)
            self.cs(1)
        else:
            self.dc(1)
            self.spi.write(buf)
  
    def reset(self):
        super().reset(self.res)