#include <DHT.h>   //library sensor suhu

#define DHTTYPE DHT22
#include <LiquidCrystal_I2C.h>   //library lcd i2c versi lain

int pinSensor=2;
float DataSuhu=0;//celcius
float DataSuhuR=0;//reamur
float DataSuhuF=0;//fahrenheit

float DataKelembapan=0;//data kelembapan

DHT dht(pinSensor, DHTTYPE);
LiquidCrystal_I2C lcd(0x27,16,2);

void setup()
{
  Serial.begin(9600);
  dht.begin();

  lcd.init();
  lcd.backlight();
}

void loop()
{
  delay(2000);
  DataSuhu=dht.readTemperature();//rumus menampilan suhu celcius

  DataKelembapan=dht.readHumidity();//rumus menampilkan data kelembapan

  DataSuhuR = DataSuhu *0.8;//rumus menampilkan data reamur
  DataSuhuF = (DataSuhu * 9/5) + 32;//rumus menampilkan data fahrenheit

  Serial.print("Data SuhuC: ");
  Serial.print(DataSuhu);
  Serial.println(" C");
  lcd.setCursor(0,0);
  lcd.print("Data SuhuC: ");
  lcd.setCursor(0,1);
  lcd.print(DataSuhu);
  lcd.print(" C");

  delay(2000);
  lcd.clear();

  Serial.print("Data SuhuR: ");
  Serial.print(DataSuhuR);
  Serial.println(" R");
  lcd.setCursor(0,0);
  lcd.print("Data SuhuR: ");
  lcd.setCursor(0,1);
  lcd.print(DataSuhuR);
  lcd.print(" R");

  delay(2000);
  lcd.clear();

  Serial.print("Data SuhuF: ");
  Serial.print(DataSuhuF);
  Serial.println(" F");
  lcd.setCursor(0,0);
  lcd.print("Data SuhuF: ");
  lcd.setCursor(0,1);
  lcd.print(DataSuhuF);
  lcd.print(" F");

  delay(2000);
  lcd.clear();

  Serial.print("Data Kelembapan: ");
  Serial.print(DataKelembapan);
  Serial.println(" %");
  lcd.setCursor(0,0);
  lcd.print("Data Kelembapan: ");
  lcd.setCursor(0,1);
  lcd.print(DataKelembapan);
  lcd.print(" %");

}