/*
 * Simple example for how to use multiple SinricPro Switch device:
 * - setup 4 switch devices
 * - handle request using multiple callbacks
 * 
 * If you encounter any issues:
 * - check the readme.md at https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md
 * - ensure all dependent libraries are installed
 *   - see https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md#arduinoide
 *   - see https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md#dependencies
 * - open serial monitor and check whats happening
 * - check full user documentation at https://sinricpro.github.io/esp8266-esp32-sdk
 * - visit https://github.com/sinricpro/esp8266-esp32-sdk/issues and check for existing issues or open a new one
 */


#ifdef ENABLE_DEBUG
   #define DEBUG_ESP_PORT Serial
   #define NODEBUG_WEBSOCKETS
   #define NDEBUG
#endif 

#include <Arduino.h>
#if defined(ESP8266)
  #include <ESP8266WiFi.h>
#elif defined(ESP32) || defined(ARDUINO_ARCH_RP2040)
  #include <WiFi.h>
#endif

#include "SinricPro.h"
#include "SinricProSwitch.h"

#define WIFI_SSID         "Wokwi-GUEST"
#define WIFI_PASS         ""
#define APP_KEY           "a8c414d6-7173-4a60-a8fb-515d15a24b54"
#define APP_SECRET        "d9ab7f68-4681-460b-a13b-864ba415168b-7115a931-dc48-45a8-8396-edf7326fdfa6"

#define SWITCH_ID_1       "671e4919d70f2259b6e552dc"
#define RELAYPIN_1        5

#define SWITCH_ID_2       "671e4b36d70f2259b6e5543f"
#define RELAYPIN_2        18

#define SWITCH_ID_3       "671e4b605889569a22b313d3"
#define RELAYPIN_3        19

#define BAUD_RATE         115200                // Change baudrate to your need

bool onPowerState1(const String &deviceId, bool &state) {
 Serial.printf("Device 1 turned %s", state?"on":"off");
 digitalWrite(RELAYPIN_1, state ? HIGH:LOW);
 return true; // request handled properly
}

bool onPowerState2(const String &deviceId, bool &state) {
 Serial.printf("Device 2 turned %s", state?"on":"off");
 digitalWrite(RELAYPIN_2, state ? HIGH:LOW);
 return true; // request handled properly
}

bool onPowerState3(const String &deviceId, bool &state) {
 Serial.printf("Device 3 turned %s", state?"on":"off");
 digitalWrite(RELAYPIN_3, state ? HIGH:LOW);
 return true; // request handled properly
}

// setup function for WiFi connection
void setupWiFi() {
  Serial.printf("\r\n[Wifi]: Connecting");

  #if defined(ESP8266)
    WiFi.setSleepMode(WIFI_NONE_SLEEP); 
    WiFi.setAutoReconnect(true);
  #elif defined(ESP32)
    WiFi.setSleep(false); 
    WiFi.setAutoReconnect(true);
  #endif

  WiFi.begin(WIFI_SSID, WIFI_PASS,6);

  while (WiFi.status() != WL_CONNECTED) {
    Serial.printf(".");
    delay(250);
  }

  Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
}

// setup function for SinricPro
void setupSinricPro() {
  // add devices and callbacks to SinricPro
  pinMode(RELAYPIN_1, OUTPUT);
  pinMode(RELAYPIN_2, OUTPUT);
  pinMode(RELAYPIN_3, OUTPUT);
    
  SinricProSwitch& mySwitch1 = SinricPro[SWITCH_ID_1];
  mySwitch1.onPowerState(onPowerState1);
  
  SinricProSwitch& mySwitch2 = SinricPro[SWITCH_ID_2];
  mySwitch2.onPowerState(onPowerState2);
  
  SinricProSwitch& mySwitch3 = SinricPro[SWITCH_ID_3];
  mySwitch3.onPowerState(onPowerState3);
  
  
  // setup SinricPro
  SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); }); 
  SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
   
  SinricPro.begin(APP_KEY, APP_SECRET);
}

// main setup function
void setup() {
  Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
  setupWiFi();
  setupSinricPro();
}

void loop() {
  SinricPro.handle();
}