#include "DHT.h"
#include "U8glib.h"
U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);//Defina o nome do dispositivo: I2C-SSD1306-128*64 (OLED)

////////Acréscimo

#include <WiFi.h>
#include <WiFiClientSecure.h>
#include <UniversalTelegramBot.h>
#include <ArduinoJson.h>
//////////////////////


#define automizer 2
#define DHTPIN A0

#define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE);

bool isAutomizerOn = false;

void setup() {
  Serial.begin(9600);
  digitalWrite(automizer, LOW);
  dht.begin();
}

void loop() {
  float humidity = dht.readHumidity();

  u8g.firstPage();
  do {
    u8g.setFont(u8g_font_gdr14r);
    if (isAutomizerOn) {
      u8g.setPrintPos(5, 25);
      u8g.print("In Operation");
    } else {
      u8g.setPrintPos(35, 25);
      u8g.print("Ready");
    }
    u8g.setFont(u8g_font_9x18);
    u8g.setPrintPos(1, 50);
    u8g.print("Humid: ");
    u8g.print(humidity);
    u8g.print("%");
  } while (u8g.nextPage());

  if (humidity <= 52 && !isAutomizerOn) {
    Serial.println("Automizer On");
    digitalWrite(automizer, HIGH);
    isAutomizerOn = true;
    Serial.print("Humidity: ");
    Serial.println(humidity);
  } else if (humidity >= 60 && isAutomizerOn) {
    Serial.println("Automizer Off");
    digitalWrite(automizer, LOW);
    isAutomizerOn = false;
    Serial.print("Humidity: ");
    Serial.println(humidity);
  }
  delay(100);
}