#include "DHT.h"
//#include "U8glib.h"
//U8GLIB_SSD1306_128X64 u8g(U8G_I2C_OPT_NONE);//Defina o nome do dispositivo: I2C-SSD1306-128*64 (OLED)

////////Acréscimo
#include <Adafruit_SSD1306.h>
#include <WiFi.h>
#include <WiFiClientSecure.h>
//#include <UniversalTelegramBot.h>
//#include <ArduinoJson.h>

#define SCREEN_WIDTH 128 // OLED width,  in pixels
#define SCREEN_HEIGHT 64 // OLED height, in pixels

// create an OLED display object connected to I2C
Adafruit_SSD1306 oled(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);

//////////////////////

#define automizer 2
#define DHTPIN 15 /// pino alterado

#define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE);

bool isAutomizerOn = false;

void setup() {
  Serial.begin(9600);
  digitalWrite(automizer, LOW);
  dht.begin();

  // initialize OLED display with I2C address 0x3C
  if (!oled.begin(SSD1306_SWITCHCAPVCC, 0x3C)) {
    Serial.println(F("failed to start SSD1306 OLED"));
    while (1);
  }
  delay(2000);         // wait two seconds for initializing
  oled.clearDisplay(); // clear display

  oled.setTextSize(1);         // set text size
  oled.setTextColor(WHITE);    // set text color
  oled.setCursor(0, 2);       // set position to display (x,y)
  oled.println("Robotronix"); // set text
  oled.display();              // display on OLED
}

void loop() {
  float humidity = dht.readHumidity();

  /*u8g.firstPage();
  do {
    u8g.setFont(u8g_font_gdr14r);
    if (isAutomizerOn) {
      u8g.setPrintPos(5, 25);
      u8g.print("In Operation");
    } else {
      u8g.setPrintPos(35, 25);
      u8g.print("Ready");
    }
    u8g.setFont(u8g_font_9x18);
    u8g.setPrintPos(1, 50);
    u8g.print("Humid: ");
    u8g.print(humidity);
    u8g.print("%");
  } while (u8g.nextPage());*/

  if (humidity <= 52 && !isAutomizerOn) {
    Serial.println("Automizer On");
    digitalWrite(automizer, HIGH);
    isAutomizerOn = true;
    Serial.print("Humidity: ");
    Serial.println(humidity);
  } else if (humidity >= 60 && isAutomizerOn) {
    Serial.println("Automizer Off");
    digitalWrite(automizer, LOW);
    isAutomizerOn = false;
    Serial.print("Humidity: ");
    Serial.println(humidity);
  }
  oled.clearDisplay(); // clear display
  oled.println(humidity); 
  oled.display();              // display on OLED
  delay(1000);
}