#include <Keypad.h>

const uint8_t LEDS = 3;
const uint8_t ROWS = 4;
const uint8_t COLS = 4;

char keys[ROWS][COLS] = {
  { '1', '2', '3', 'A' },
  { '4', '5', '6', 'B' },
  { '7', '8', '9', 'C' },
  { '*', '0', '#', 'D' }
};

// Pins connected to LED1, LED2, LED3, ...LED12
uint8_t ledPins[LEDS] = { 12,11,10};
uint8_t rowPins[ROWS] = { 16,17,18,19}; // Pins connected to R1, R2, R3, R4
uint8_t colPins[COLS] = { 20,21,22,26}; // Pins connected to C1, C2, C3, C4

Keypad keypad = Keypad(makeKeymap(keys), rowPins, colPins, ROWS, COLS);

void setup() {
  for (uint8_t l = 0; l < LEDS; l++) {
    pinMode(ledPins[l], OUTPUT);
    digitalWrite(ledPins[l], LOW);
    Serial.println("hello");
  }
}

void loop() {
  char key = keypad.getKey();

  if (key != NO_KEY) {
    switch (key) {
      case '1': digitalWrite(ledPins[0], HIGH);
        break;
      case '2': digitalWrite(ledPins[1], HIGH);
        break;
      case '3': digitalWrite(ledPins[2], HIGH);
        break;
      case '4': digitalWrite(ledPins[3], HIGH);
        break;
      case '5': digitalWrite(ledPins[4], HIGH);
        break;
      case '6': digitalWrite(ledPins[5], HIGH);
        break;
      case '7': digitalWrite(ledPins[6], HIGH);
        break;
      case '8': digitalWrite(ledPins[7], HIGH);
        break;
      case '9':
        for (uint8_t l = 0; l < 8; l++) {
          digitalWrite(ledPins[l], HIGH);
        }
        break;
      case '0':
        for (uint8_t l = 0; l < 8; l++) {
          digitalWrite(ledPins[l], LOW);
        }
        break;
      case 'A': digitalWrite(ledPins[8], HIGH);
        break;
      case 'B': digitalWrite(ledPins[9], HIGH);
        break;
      case 'C': digitalWrite(ledPins[10], HIGH);
        break;
      case 'D': digitalWrite(ledPins[11], HIGH);
        break;
      case '*':
        for (uint8_t l = 8; l < 12; l++) {
          digitalWrite(ledPins[l], HIGH);
        }
        break;
      case '#':
        for (uint8_t l = 8; l < 12; l++) {
          digitalWrite(ledPins[l], LOW);
        }
        break;
    }
  }

  delay(10);
}