/**
  ******************************************************************************
  * @file	: 10_HntdTmLtchMPBttn_1a.ino
  * @brief  : Example for the ButtonToSwitch library HntdTmLtchMPBttn class
  *
  * Repository: https://github.com/GabyGold67/ButtonToSwitch_AVR
  * WOKWI simulation URL: https://wokwi.com/projects/414262506522274817
  * 
  * Framework: Arduino
  * Platform: *
  * 
  * @details The example instantiates a TmVdblMPBttn object using:
  * 	- 1 push button between GND and dmpbMainInpt
  * 	- 1 led with it's corresponding resistor between GND and dmpbIsOnOtpt
  * 	- 1 led with it's corresponding resistor between GND and dmpbWrnngOtpt
  * 	- 1 led with it's corresponding resistor between GND and dmpbPilotOtpt
  *
  * This simple example instantiates the HntdTmLtchMPBttn object in the setup(),
  * and checks it's attributes flags through the getters methods.
  * 
  * When a change in the object's outputs attribute flags values is detected, it
  * manages the loads and resources that the switch turns On and Off, in this
  * example case are the output of some GPIO pins.
  * 
  * @author	: Gabriel D. Goldman
  * mail <[email protected]>
  * Github <https://github.com/GabyGold67>
  *
  * @date First release: 01/08/2023 
  *       Last update:   07/10/2024 14:20 GMT+0200 DST
  ******************************************************************************
  * @warning **Use of this library is under your own responsibility**
  * 
  * @warning The use of this library falls in the category described by The Alan 
  * Parsons Project (c) 1980 "Games People play" disclaimer:  
  * Games people play, you take it or you leave it  
  * Things that they say aren't alright  
  * If I promised you the moon and the stars, would you believe it?  
  * 
  * Released into the public domain in accordance with "GPL-3.0-or-later" license terms.
  ******************************************************************************
*/
#include <Arduino.h>
#include <ButtonToSwitch.h>

const uint8_t dmpbMainInpt{A0};
const uint8_t dmpbIsOnOtpt{3};
const uint8_t dmpbWrnngOtpt{5};
const uint8_t dmpbPilotOtpt{7};

HntdTmLtchMPBttn myDMPBttn (dmpbMainInpt, 4000, 25);

void setup() {
  digitalWrite(dmpbIsOnOtpt, LOW);
  digitalWrite(dmpbWrnngOtpt, LOW);
  digitalWrite(dmpbPilotOtpt, LOW);

  pinMode(dmpbIsOnOtpt, OUTPUT);
  pinMode(dmpbWrnngOtpt, OUTPUT);
  pinMode(dmpbPilotOtpt, OUTPUT);

  myDMPBttn.setKeepPilot(true);
  myDMPBttn.begin(40);
}

void loop() {
  if(myDMPBttn.getOutputsChange()){
    digitalWrite(dmpbIsOnOtpt, (myDMPBttn.getIsOn())?HIGH:LOW);    
    digitalWrite(dmpbWrnngOtpt, (myDMPBttn.getWrnngOn())?HIGH:LOW);    
    digitalWrite(dmpbPilotOtpt, (myDMPBttn.getPilotOn())?HIGH:LOW);    
    myDMPBttn.setOutputsChange(false);
  }
}