/*
 * Created by ArduinoGetStarted.com
 *
 * This example code is in the public domain
 *
 * Tutorial page: https://arduinogetstarted.com/tutorials/arduino-lm35-temperature-sensor
 */

#define ADC_VREF_mV    5000.0 // in millivolt
#define ADC_RESOLUTION 1024.0
#define PIN_LM35       A0

void setup() {
  Serial.begin(9600);
  pinMode(10, OUTPUT);
    pinMode(7, OUTPUT);

}

void loop() {
  // get the ADC value from the temperature sensor
  int adcVal = analogRead(PIN_LM35);
  // convert the ADC value to voltage in millivolt
  float milliVolt = adcVal * (ADC_VREF_mV / ADC_RESOLUTION);
  // convert the voltage to the temperature in Celsius
  float tempC = milliVolt / 10;
  // convert the Celsius to Fahrenheit
  float tempF = tempC * 9 / 5 + 32;

  // print the temperature in the Serial Monitor:
  Serial.print("Temperature: ");
  Serial.print(tempC);   // print the temperature in Celsius
  Serial.print("°C");
  Serial.print("  ~  "); // separator between Celsius and Fahrenheit
  Serial.print(tempF);   // print the temperature in Fahrenheit
  Serial.println("°F");

  delay(1000);

  if(tempC>20)
  {
  digitalWrite(10, HIGH);
  delay(100);
  }
  else 
  digitalWrite(10, LOW);
  int x = analogRead(A1); 
  if(x>512)
  {
  digitalWrite(7, HIGH);
  delay(100);
  }
  else 
  digitalWrite(7, LOW);
}