/* 
  Sketch generated by the Arduino IoT Cloud Thing "Untitled"
  https://create.arduino.cc/cloud/things/422aa3a1-7e40-45a5-98a8-b0496d88434d 

  Arduino IoT Cloud Variables description

  The following variables are automatically generated and updated when changes are made to the Thing

  CloudLight led;
  CloudTemperatureSensor temperatura;
  CloudRelativeHumidity umidade;

  Variables which are marked as READ/WRITE in the Cloud Thing will also have functions
  which are called when their values are changed from the Dashboard.
  These functions are generated with the Thing and added at the end of this sketch.
*/
#include <ArduinoIoTCloud.h>
#include <Arduino_ConnectionHandler.h>

const char DEVICE_LOGIN_NAME[]  = "00374a9e-d6f0-42e0-b188-79c7bb8643f1";

const char SSID[]               = "Wokwi-GUEST";    // Network SSID (name)
const char PASS[]               = "";    // Network password (use for WPA, or use as key for WEP)
const char DEVICE_KEY[]  = "UjO6yrAam#M5oykaTZw8UjWH8";    // Secret device password

void onLedChange();

CloudLight led;
CloudTemperatureSensor temperatura;
CloudRelativeHumidity umidade;

void initProperties(){

  ArduinoCloud.setBoardId(DEVICE_LOGIN_NAME);
  ArduinoCloud.setSecretDeviceKey(DEVICE_KEY);
  ArduinoCloud.addProperty(led, READWRITE, ON_CHANGE, onLedChange);
  ArduinoCloud.addProperty(temperatura, READ, ON_CHANGE, NULL);
  ArduinoCloud.addProperty(umidade, READ, ON_CHANGE, NULL);

}

WiFiConnectionHandler ArduinoIoTPreferredConnection(SSID, PASS);


#define PIN_LED 32 //pino do LED acionado pelo switch do app
#define PIN_BOTTON 33 //pino do botão

#include "DHT.h"
#define DHTPIN 4     // Digital pin connected to the DHT sensor
#define DHTTYPE DHT22   // DHT 22  (AM2302), AM2321
DHT dht(DHTPIN, DHTTYPE);

void setup() {
  // Initialize serial and wait for port to open:
  Serial.begin(9600);
  // This delay gives the chance to wait for a Serial Monitor without blocking if none is found
  delay(1500); 

  // Defined in thingProperties.h
  initProperties();

  // Connect to Arduino IoT Cloud
  ArduinoCloud.begin(ArduinoIoTPreferredConnection);

  pinMode (PIN_LED, OUTPUT);
  pinMode (PIN_BOTTON, INPUT);
  
  /*
     The following function allows you to obtain more information
     related to the state of network and IoT Cloud connection and errors
     the higher number the more granular information you’ll get.
     The default is 0 (only errors).
     Maximum is 4
 */
  setDebugMessageLevel(2);
  ArduinoCloud.printDebugInfo();
}

void loop() {
  ArduinoCloud.update();
  // Your code here 
  temperatura = dht.readTemperature();
  umidade = dht.readHumidity();
  delay(1000);
}


/*
  Since Led is READ_WRITE variable, onLedChange() is
  executed every time a new value is received from IoT Cloud.
*/
void onLedChange()  {
  // Add your code here to act upon Led change
  if(led == 1)
    digitalWrite(PIN_LED, HIGH);
  else
    digitalWrite(PIN_LED, LOW);
}