#include <WiFi.h>
#include <HTTPClient.h>

const char* host = "127.0.0.1";

#include <DHT.h>
#define DHTPIN 5 
#define DHTTYPE DHT22 
DHT dht(DHTPIN, DHTTYPE);

char ssid[] = "Wokwi-GUEST"; //nama hotspot yang digunakan
char pass[] = ""; //password hotspot yang digunakan

float hum; 
float temp; 

void setup() { 
  Serial.begin(115200); 
  dht.begin();
  // Set WiFi to station mode and disconnect from an AP if it was Previously
  // connected
  WiFi.mode(WIFI_STA);
  WiFi.disconnect();
  delay(100);

  // attempt to connect to Wifi network:
  Serial.print("Connecting Wifi: ");
  Serial.println(ssid);
  WiFi.begin(ssid, pass);

  while (WiFi.status() != WL_CONNECTED) {
    Serial.print(".");
    delay(500);
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());
}
 
void loop() { 
  hum = dht.readHumidity(); 
  temp = dht.readTemperature(); 
 
  Serial.print("Humidity: "); 
  Serial.print(hum); 
  Serial.print("%  "); 
  Serial.print("Temperature: "); 
  Serial.print(temp); 
  Serial.print("°C \n"); 
  delay(1000);
 
 Serial.print("connecting to ");
 Serial.println(host);

 WiFiClient client;
    const int httpPort = 9080;
    if (!client.connect(host, httpPort)) {
        Serial.println("connection failed");
        return;
    }

    // We now create a URI for the request
    String url = "http://192.168.2.248/Mikro2/update-data.php?";

    url += "&temperatur=";
    url += temp;
    url += "&humidity=";
    url += hum;

    Serial.print("Requesting URL: ");
    Serial.println(url);

    // This will send the request to the server
    client.print(String("GET ") + url + " HTTP/1.1\r\n" +
                 "Host: " + host + "\r\n" +
                 "Connection: close\r\n\r\n");
    unsigned long timeout = millis();
    while (client.available() == 0) {
        if (millis() - timeout > 5000) {
            Serial.println(">>> Client Timeout !");
            client.stop();
            return;
        }
} 
// Read all the lines of the reply from server and print them to Serial
    while(client.available()) {
        String line = client.readStringUntil('\r');
        Serial.print(line);
    }

    Serial.println();
    Serial.println("closing connection");
}