import time
time.sleep(0.1) # Wait for USB to become ready

print("Hello, Pi Pico!")

from StopwatchController import *

st = StopwatchController()
st.run()

main.py

diagram.json

"""
# Button.py - Object-Oriented implementation of a Button
# Also added a simple implementation of a single analog Joystick
# Author: Arijit Sengupta
"""

from machine import Pin, ADC
import time
from Log import *

class Button:
    """
    A simple Button class
    Create the button using Button(pinnumber, name, handler)
    handler is typically self, and create two methods buttonPressed and buttonReleased
    to handle the push and release of the button.
    The name of the button will be passed back to the handler to identify
    which button was pressed/released
    """
    
    def __init__(self, pin, name, *, handler=None, lowActive=True):
        """
        Initialize attributes and other internal data
        """
        
        self._pinNo = pin
        self._name = name
        Log.i(f'Button constructor: create button {name} at pin {pin}')
        if lowActive:
            self._pin = Pin(pin, Pin.IN, Pin.PULL_UP)
        else:
            self._pin = Pin(pin, Pin.IN, Pin.PULL_DOWN)
        self._debounce_time = 0
        self._lowActive = lowActive
        self._lastStatus = None
        self._handler = None
        self.setHandler(handler)
        
    def isPressed(self):
        """ Check if the button is pressed or not - useful if polling """
        
        status = (self._lowActive and self._pin.value() ==0) or (not self._lowActive and self._pin.value() == 1)
        Log.i(f'Button {self._name} isPressed: {status}')
        return status
    
    def setHandler(self, handler):
        """ 
	    set the handler to a new handler. Pass None to remove existing handler
	    """
        
        # if the old handler was active already, or if the new handler is None, remove the irq
        if self._handler is not None or handler is None:
            self._pin.irq(handler = None)
    
        # Now set it to th enew handler
        self._handler = handler
        # Create the IRQ if the handler is not None
        if self._handler:
            self._pin.irq(trigger = Pin.IRQ_FALLING | Pin.IRQ_RISING, handler = self._callback)
        
    def _callback(self, pin):
        """ The private interrupt handler - will call appropriate handlers """
        
        t = time.ticks_ms()
        v = self._pin.value()
        if ((self._lastStatus == None or self._lastStatus != v) and t-self._debounce_time) > 50:
            self._debounce_time=t
            self._lastStatus = v
            if self._handler is not None:
                if self.isPressed():
                    Log.i(f'Button {self._name} pressed')
                    self._handler.buttonPressed(self._name)
                else:
                    Log.i(f'Button {self._name} released')
                    self._handler.buttonReleased(self._name)
        #self._debounce_time=t

class Joystick(Button):
    """
    A joystick is technically more than a Button, but this is an example
    of using a subclass to inherit some functionality, and adding other
    functions as needed. 

    So we implement a Joystick as a subclass of a button, with the internal
    button inherited from the Button class, and the horizontal and vertical
    axes implemented as ADC pin implementations. 

    Interestingly, we may have looked into AnalogSensor as well, but there is
    no tripping of a Joystick so we don't need that.
    """
    
    # Some constants to store some basic conditions
    LOW = 0
    HIGH = 65535
    MID = 32760

    # Joystick status codes
    CENTER = 0
    UP = 1
    DOWN = 2
    LEFT = 3
    RIGHT = 4
    MOVING = 5
    
    # Status text
    statuscodes = ['Center', 'Up', 'Down', 'Left', 'Right', 'Moving']

    def __init__(self, vpin, hpin, swpin, name, *, handler=None, delta=1000):
        # Let the superclass handle all button functionality
        super().__init__(swpin, name, handler=handler, lowActive=True)
        Log.i(f'Joystick constructor: create joystick at v:{vpin}, h:{hpin}')

        # H and V axis pins must be standard ADC supporting
        if vpin <26 or vpin > 28 or hpin < 26 or hpin > 28:
            raise ValueError("Joystick Error: must connect v/h to ADC pins")

        self._v = ADC(vpin)
        self._h = ADC(hpin)
        self._delta = delta

    def getData(self):
        """
        A simple method to return the x and y values
        """

        return (self._h.read_u16(), self._v.read_u16())

    def getStatusCode(self):
        """
        Return the status code of the joystick
        0 - center, 1 left 2 right 3 up 4 down
        5 if it is not quite in any distinct position
        """

        (x,y) = self.getData()

        if x < self.LOW + self._delta:
            return self.RIGHT
        if x > self.HIGH - self._delta:
            return self.LEFT
        if y < self.LOW + self._delta:
            return self.DOWN
        if y > self.HIGH - self._delta:
            return self.UP
        if x > self.MID - self._delta and x < self.MID + self._delta and y > self.MID - self._delta and y < self.MID + self._delta:
            return self.CENTER
        return self.MOVING

    def getStatus(self):
        """
        Get the status of the joystick in text
        center, left, right, up, down, moving
        """
    
        return Joystick.statuscodes[self.getStatusCode()]


Button.py

"""
# Displays.py
# A collection of various text-based displays
# Note - as of 7/31/24 only the LCDDisplay is implemented in this module
# Use OtherDisplays.py, GraphicDisplays.py and GraphicLCD.py for the rest
# Supports LCD 1602 displays - both using an i2c backpack as well as GPIO
# Only supports number and basic text displays 
# Author: Arijit Sengupta
"""

from machine import Pin, I2C, SPI
import time
from Log import *
from gpio_lcd import *
from pico_i2c_lcd import I2cLcd

class Display:
    """
    The Display Base class - might not actually be needed
    But here to ensure we do not have a duckTyping problem
    """

    def reset(self):
        Log.e(f"reset NOT IMPLEMENTED in {type(self).__name__}")
        
    def clear(self):
        self.reset()

    def showNumber(self, number):
        Log.e(f"showNumber NOT IMPLEMENTED! in {type(self).__name__}")

    def showText(self, text):
        Log.e(f"showText NOT IMPLEMENTED! in {type(self).__name__}")

    def scroll(self, text, speed=250):
        Log.e(f"Scroll NOT IMPLEMENTED! in {type(self).__name__}")

class LCDDisplay(Display):
    """
    LCD Display class - currently supports displays with an I2C backpack
    as well as displays directly driven via the d4-d7 pins
    
    Parameters
    --------
    This is important since Python does not have method overloading, we have one init
    to do both parallel as well as i2c displays
    pass rs, e, d4, d5, d6, d7 pin numbers for parallel displays
    
    pass sda and scl for i2c displays - default is to use parallel so must pass
    both sda/scl if using i2c
    
    To connect the display to I2C 0 on GPIO pins 0,1
    usage: LCDDisplay(sda=0, scl=1)
    
    To connect the display to I2C ID 1 on GPIO pins 2,3
    usage: LCDDisplay(sda=2, scl=3)
    
    To connect via parallel with rs on pin 5, e on pin 4
    and d4,d5,d6,d7 to pins 3,2,1 and 0:
    usage:  LCDDisplay()  # yeah those are the default so you don't need to send
    usage: LCDDisplay(rs=5, e=4, d4=3, d5=2, d6=1, d7=0) # preferred - you can see how its hooked up
    
    """
    
    def __init__(self, rs=5, e=4, d4=3, d5=2, d6=1, d7=0, *, sda=-1, scl=-1):
        """
        Combined constructor for the direct-driven displays
        explicitly pass in the sda and scl if you need to use I2C
        """
        
        if sda < 0:
            Log.i("LCDDisplay Constructor")
            self._lcd = GpioLcd(rs_pin=Pin(rs),
                enable_pin=Pin(e),
                d4_pin=Pin(d4),
                d5_pin=Pin(d5),
                d6_pin=Pin(d6),
                d7_pin=Pin(d7),
                num_lines=2, num_columns=16)
        else:
            Log.i("LCDDisplay (I2C) Constructor")
            """
            Lets determine the i2c id from the sda and scl pins
            """
            i2cid = -1 # lets set an invalid value to start with
            if (sda == 0 and scl == 1) or (sda == 4 and scl == 5) or (sda == 8 and scl == 9) or (sda == 12 and scl == 13) or (sda == 16 and scl == 17) or (sda == 20 and scl == 21):    
                i2cid = 0
            elif (sda == 2 and scl == 3) or (sda == 6 and scl == 7) or (sda == 10 and scl == 11) or (sda == 14 and scl == 15) or (sda == 18 and scl == 19) or (sda == 26 and scl == 27):
                i2cid = 1
            else:
                raise ValueError('Invalid SDA/SCL pins')
            i2c = I2C(i2cid, sda=Pin(sda), scl=Pin(scl), freq=400000)
            try:
                I2C_ADDR = i2c.scan()[0]
                self._lcd = I2cLcd(i2c, I2C_ADDR, 2, 16)
            except:
                raise ValueError('Could not connect to display - check wiring.')
        self._working = False

    def reset(self):
        """ 
        clear the display screen
        """
        
        Log.i("LCDDisplay: reset")
        self._lcd.clear()
        self._working = False

    def clear(self, line=-1):
        """
        Clear only a single line - negative to reset
        """

        if line < 0 or line > 1:
            self.reset()
        else:
            self.showText(f'{" "*16}',line)

    def showNumber(self, number, row=0, col=0):
        """
        show a single number
        """
        
        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - showing number {number} at {row},{col}")
        self._lcd.move_to(col, row)
        self._lcd.putstr(f"{number}")
        self._working = False

    def showNumbers(self, num1, num2, colon=True, row=0, col=0):
        """
        Show two numbers optionally separated by a colon
        by default, the colon is shown
        """
        
        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - showing numbers {num1}, {num2} at {row},{col}")
        self._lcd.move_to(col, row)
        colsym = ":" if colon else " "
        self._lcd.putstr(f"{num1}{colsym}{num2}")
        self._working = False

    def showText(self, text, row=0, col=0):
        """
        Show a string - only first 4 characters will be shown
        for anything bigger than 4 characters.
        """
        
        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - showing text {text} at {row},{col}")
        self._lcd.move_to(col, row)
        self._lcd.putstr(text)
        self._working = False

    def addShape(self, position, shapearray):
        """
        Add a custom character at a position.
        position must be between 0 and 7
        shapearray needs to be a bytearray that can
        be created by going to
        https://maxpromer.github.io/LCD-Character-Creator/
        and then copying the bytes into a bytearray as a list of hex values
        as in the example below:

        d.addShape(1, [0x00,0x0A,0x0A,0x00,0x11,0x0E,0x04,0x00]) # a smiley face
        d.showText(chr(1), 0,5) # show the smiley face at position 5 of row 0
        """
        
        if position < 0 or position > 7:
            raise ValueError('Position must be between 0 and 7.')
        if len(shapearray) != 8:
            raise ValueError('Make sure array is exactly 8 bytes')
        self._lcd.custom_char(position, shapearray)

    def scroll(self, text, row=0, speed=100, skip=2):
        """
        A very simple scroll implementation
        Scrolls some text right to left in a row

        speed is essentially the delay between refresh - lower the better
        skip is the number of chars to skip for the next refresh
        higher number will be faster but may be jerky. lower will be smooth
        but slower.

        I2C devices may not have best scrolling performance. Works
        better with GPIO-driven displays
        """

        if self._working:
            Log.e("LCDDisplay - Display busy")
            return
        self._working = True
        Log.i(f"LCDDisplay - scrolling text {text} in row {row}")
        for p in range(0,len(text)+skip, skip):
            curst = (text+' '*(16+skip))[p:p+16]
            for c in range(16,0,-1):
                self._lcd.move_to(c-1, row)
                self._lcd.putchar(curst[c-1])
            time.sleep(speed/1000)
        self._working = False


Displays.py

"""
# Counters.py
# A collection of different kinds of counters that might be used for
# various projects
# Author: Arijit Sengupta
"""

import time
from machine import Timer, RTC
from Log import *

class Counter:
    """
    Counter base class - provides an internal count, an initiailzer and a reset method
    everything else should be defined at subclass level
    """
    
    def __init__(self, name='Counter'):
        Log.i(f"{name}: constructor")
        self._name = name
        self._count = 0

    def reset(self):
        """ Reset counter memory to 0 """
        
        Log.i("Counter - reset")
        self._count = 0

class UpDownCounter(Counter):
    """ A basic updown counter - can go up or down, can set up a min and max """
    
    def __init__(self, name='Updown counter', min = None, max = None):
        Log.i(f"{name} constructor")
        super().__init__(name)
        self._min = min
        self._max = max

    def up(self, step=1):
        """
        count up - with an optional step. Note that if the result will be less than max,
        no change will be made.
        """
                
        Log.i("Updowncounter incrementing")
        if (self._max is None or self._count + step <= self._max):
            self._count = self._count + step

    def down(self, step=1):
        """
        Count down - with an optional step. Note that if the result will be less than min,
        no change will be made
        """
        
        Log.i("Updowncounter decrementing")
        if (self._min is None or self._count - step >= self._min):
            self._count = self._count - step

    def __str__(self)->str:
        """ a string representation of the internal count """
        
        return f"{self._count}"

class TimeKeeper(Counter):
    """
    Keeps time as a count. Basically a stopwatch
    Internal count stores the number of ms of counting
    Can be stopped and started many times. Only reset will set
    count to 0
    """
    
    def __init__(self,name='Timekeeper'):
        Log.i(f"{name} : constructor")
        super().__init__(name)
        self._starttime = 0
        self._running = False

    def start(self):
        """ Start the timer. Note that if previously stopped, this will add to previous time """
        
        Log.i("Timekeeper: start")
        """ If timer was already running, the start will get reset to the new time """

        self._starttime = time.ticks_ms()
        self._running = True

    def stop(self):
        """ Stop the timer. Count will save the # of ms elapsed """
        
        Log.i("Timekeeper: stop")
        """ If it was already stopped, nothing to be done """
        if self._running:
            self._running = False
            self._count = self._count + time.ticks_diff(time.ticks_ms(),self._starttime)

    def reset(self):
        """ 
        Resetting the timer will set count to 0 and starttime to the current time 
        But timer keeps running if not stopped
        """
        
        super().reset()
        self._starttime = time.ticks_ms()
        self._running = False

    def elapsed_time(self, format='sec'):
        """
        Get the elapsed time in seconds (default) or ms by passing format='ms'
        """
        if self._running:
            ms = self._count + time.ticks_diff(time.ticks_ms(),self._starttime)
        else:
            ms = self._count
        if format == 'ms':
            return ms
        else:
            return int(ms / 1000)

    def __str__(self) -> str:
        """ Get a string representation of time in HH:MM:SS.ms format """
        
        curtime = self._count + (time.ticks_diff(time.ticks_ms(),self._starttime) if self._running else 0)
        ms = curtime % 1000
        sec = (curtime // 1000) % 60
        min = (curtime // 60000) % 60
        hr = (curtime // 3600000)
        return f"{hr:02d}:{min:02d}:{sec:02d}.{ms:03d}"


class BaseTimer(Counter):
    """ 
    Decided to create a base class for the Software and Hardware timers
    since there are many properties in common. Now allowing no handlers in init
    but obviously a handler has to be set in order to ensure something happens when
    the time runs out.
    """

    def __init__(self, name='timer', handler=None):
        super().__init__(name)
        self._handler = handler
        self._started = False

    def setHandler(self, handler):
        self._handler = handler

    def start(self, seconds):
        self._count = seconds
        self._started = True

    def cancel(self):
        self._started = False
        self._count = 0

    def reset(self):
        """ Make sure reset cancels the timer first """
        
        super().reset()
        self.cancel()
        
class HardwareTimer(BaseTimer):
    """
    This uses the hardware internal timer of the Pico. This does NOT WORK on the simulator!
    The internal count here is the timer setting that is not updated until reset or cancelled
    
    """
    
    def __init__(self, name='Hardware Timer', handler=None):
        """
        A hardware timer must be initialized with a handler. The handler must implement
        a timeout() method which will be called when the timer is up. Ideally, there
        should only be a single timer active at a time.
        """
        
        super().__init__(name, handler)
        self._timer = Timer(-1)

    def start(self, seconds):
        """ Start the timer with the number of seconds to use. """
        
        super().start(seconds)
        self._timer.init(period = int(seconds*1000), mode=Timer.ONE_SHOT, callback = self.timeout)

    def cancel(self):
        """ Cancel the timer. Note that a normal stop will cause the handler callback. """
        
        if self._started:
            self._timer.deinit()
        super().cancel()
    
    def timeout(self, timer):
        self.cancel()
        self._handler.timeout(self._name)

class SoftwareTimer(BaseTimer):
    """
    A simpler software-based timer that will work on the simulator as well. Caller
    again implements a handler method, but will need to poll the timer using the
    check method at regular intervals. Check will not return anything, but will
    call the timeout function of the caller just like the hardware timer.
    """
    
    def __init__(self, name='Software Timer', handler=None):
        super().__init__(name, handler)
        self._starttime = 0
        self._started = False

    def start(self, seconds):
        """ Start the timer with a set number of seconds """
        
        Log.i(f"Starting timer with {seconds} seconds")
        self._count = seconds
        self._starttime = time.ticks_ms()
        self._started = True

    def cancel(self):
        """ Cancel the timer - timeout hander will NOT be called """
        
        if self._started:
            self._starttime = 0
            Log.i(f"{self._count} sec timer cancelled")
        super().cancel()

    def check(self):
        """
        Periodically call the check method - can be called from anywhere
        """
        
        if self._started and time.ticks_diff(time.ticks_ms(), self._starttime) > self._count * 1000:
            Log.i(f"{self._name}: {self._count} sec timer is up")
            self._started = False
            self._count = 0
            self._handler.timeout(self._name)

class Time:
    @classmethod
    def getTime(cls):
        """
        Return the currnet time using the datetime 8-tuple:
        (year (4 dig), month (1-12), date(1-31), hour (0-23), min(0,59), sec(0-59), wkday(0-6), yday(1-366))
        """
        
        return time.localtime()

    @classmethod
    def setTime(cls, tm):
        """
        Send a semi-valid time tuple - wkday and yday are ignored
        The rest have to be valid (be careful about no. of days in a month
        """
        
        RTC().datetime((tm[0], tm[1], tm[2], 0, tm[3], tm[4], tm[5], 0))
    


Counters.py

"""Source: Instructables, Tom's Hardware and GitHub """
"""Not Authored by Dr. Sengupta """
"""Implements a HD44780 character LCD connected via ESP32/RPi GPIO pins."""

from lcd_api import LcdApi
from machine import Pin
from utime import sleep_ms, sleep_us


class GpioLcd(LcdApi):
    """Implements a HD44780 character LCD connected via ESP32 GPIO pins."""

    def __init__(self, rs_pin, enable_pin, d0_pin=None, d1_pin=None,
                 d2_pin=None, d3_pin=None, d4_pin=None, d5_pin=None,
                 d6_pin=None, d7_pin=None, rw_pin=None, backlight_pin=None,
                 num_lines=2, num_columns=16):
        """Constructs the GpioLcd object. All of the arguments must be machine.Pin
        objects which describe which pin the given line from the LCD is
        connected to.
        When used in 4-bit mode, only D4, D5, D6, and D7 are physically
        connected to the LCD panel. This function allows you call it like
        GpioLcd(rs, enable, D4, D5, D6, D7) and it will interpret that as
        if you had actually called:
        GpioLcd(rs, enable, d4=D4, d5=D5, d6=D6, d7=D7)
        The enable 8-bit mode, you need pass d0 through d7.
        The rw pin isn't used by this library, but if you specify it, then
        it will be set low.
        """
        self.rs_pin = rs_pin
        self.enable_pin = enable_pin
        self.rw_pin = rw_pin
        self.backlight_pin = backlight_pin
        self._4bit = True
        if d4_pin and d5_pin and d6_pin and d7_pin:
            self.d0_pin = d0_pin
            self.d1_pin = d1_pin
            self.d2_pin = d2_pin
            self.d3_pin = d3_pin
            self.d4_pin = d4_pin
            self.d5_pin = d5_pin
            self.d6_pin = d6_pin
            self.d7_pin = d7_pin
            if self.d0_pin and self.d1_pin and self.d2_pin and self.d3_pin:
                self._4bit = False
        else:
            # This is really 4-bit mode, and the 4 data pins were just
            # passed as the first 4 arguments, so we switch things around.
            self.d0_pin = None
            self.d1_pin = None
            self.d2_pin = None
            self.d3_pin = None
            self.d4_pin = d0_pin
            self.d5_pin = d1_pin
            self.d6_pin = d2_pin
            self.d7_pin = d3_pin
        self.rs_pin.init(Pin.OUT)
        self.rs_pin.value(0)
        if self.rw_pin:
            self.rw_pin.init(Pin.OUT)
            self.rw_pin.value(0)
        self.enable_pin.init(Pin.OUT)
        self.enable_pin.value(0)
        self.d4_pin.init(Pin.OUT)
        self.d5_pin.init(Pin.OUT)
        self.d6_pin.init(Pin.OUT)
        self.d7_pin.init(Pin.OUT)
        self.d4_pin.value(0)
        self.d5_pin.value(0)
        self.d6_pin.value(0)
        self.d7_pin.value(0)
        if not self._4bit:
            self.d0_pin.init(Pin.OUT)
            self.d1_pin.init(Pin.OUT)
            self.d2_pin.init(Pin.OUT)
            self.d3_pin.init(Pin.OUT)
            self.d0_pin.value(0)
            self.d1_pin.value(0)
            self.d2_pin.value(0)
            self.d3_pin.value(0)
        if self.backlight_pin is not None:
            self.backlight_pin.init(Pin.OUT)
            self.backlight_pin.value(0)

        # See about splitting this into begin

        sleep_ms(20)   # Allow LCD time to powerup
        # Send reset 3 times
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(5)    # need to delay at least 4.1 msec
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(1)
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        sleep_ms(1)
        cmd = self.LCD_FUNCTION
        if not self._4bit:
            cmd |= self.LCD_FUNCTION_8BIT
        self.hal_write_init_nibble(cmd)
        sleep_ms(1)
        LcdApi.__init__(self, num_lines, num_columns)
        if num_lines > 1:
            cmd |= self.LCD_FUNCTION_2LINES
        self.hal_write_command(cmd)

    def hal_pulse_enable(self):
        """Pulse the enable line high, and then low again."""
        self.enable_pin.value(0)
        sleep_us(1)
        self.enable_pin.value(1)
        sleep_us(1)       # Enable pulse needs to be > 450 nsec
        self.enable_pin.value(0)
        sleep_us(100)     # Commands need > 37us to settle

    def hal_write_init_nibble(self, nibble):
        """Writes an initialization nibble to the LCD.
        This particular function is only used during initialization.
        """
        self.hal_write_4bits(nibble >> 4)

    def hal_backlight_on(self):
        """Allows the hal layer to turn the backlight on."""
        if self.backlight_pin:
            self.backlight_pin.value(1)

    def hal_backlight_off(self):
        """Allows the hal layer to turn the backlight off."""
        if self.backlight_pin:
            self.backlight_pin.value(0)

    def hal_write_command(self, cmd):
        """Writes a command to the LCD.
        Data is latched on the falling edge of E.
        """
        self.rs_pin.value(0)
        self.hal_write_8bits(cmd)
        if cmd <= 3:
            # The home and clear commands require a worst
            # case delay of 4.1 msec
            sleep_ms(5)

    def hal_write_data(self, data):
        """Write data to the LCD."""
        self.rs_pin.value(1)
        self.hal_write_8bits(data)

    def hal_write_8bits(self, value):
        """Writes 8 bits of data to the LCD."""
        if self.rw_pin:
            self.rw_pin.value(0)
        if self._4bit:
            self.hal_write_4bits(value >> 4)
            self.hal_write_4bits(value)
        else:
            self.d3_pin.value(value & 0x08)
            self.d2_pin.value(value & 0x04)
            self.d1_pin.value(value & 0x02)
            self.d0_pin.value(value & 0x01)
            self.hal_write_4bits(value >> 4)

    def hal_write_4bits(self, nibble):
        """Writes 4 bits of data to the LCD."""
        self.d7_pin.value(nibble & 0x08)
        self.d6_pin.value(nibble & 0x04)
        self.d5_pin.value(nibble & 0x02)
        self.d4_pin.value(nibble & 0x01)
        self.hal_pulse_enable()

gpio_lcd.py

"""Source: Instructables, Tom's Hardware and GitHub """
"""Not Authored by Dr. Sengupta """
"""Provides an API for talking to HD44780 compatible character LCDs."""

import time

class LcdApi:
    """Implements the API for talking with HD44780 compatible character LCDs.
    This class only knows what commands to send to the LCD, and not how to get
    them to the LCD.
    It is expected that a derived class will implement the hal_xxx functions.
    """

    # The following constant names were lifted from the avrlib lcd.h
    # header file, however, I changed the definitions from bit numbers
    # to bit masks.
    #
    # HD44780 LCD controller command set

    LCD_CLR = 0x01              # DB0: clear display
    LCD_HOME = 0x02             # DB1: return to home position

    LCD_ENTRY_MODE = 0x04       # DB2: set entry mode
    LCD_ENTRY_INC = 0x02        # --DB1: increment
    LCD_ENTRY_SHIFT = 0x01      # --DB0: shift

    LCD_ON_CTRL = 0x08          # DB3: turn lcd/cursor on
    LCD_ON_DISPLAY = 0x04       # --DB2: turn display on
    LCD_ON_CURSOR = 0x02        # --DB1: turn cursor on
    LCD_ON_BLINK = 0x01         # --DB0: blinking cursor

    LCD_MOVE = 0x10             # DB4: move cursor/display
    LCD_MOVE_DISP = 0x08        # --DB3: move display (0-> move cursor)
    LCD_MOVE_RIGHT = 0x04       # --DB2: move right (0-> left)

    LCD_FUNCTION = 0x20         # DB5: function set
    LCD_FUNCTION_8BIT = 0x10    # --DB4: set 8BIT mode (0->4BIT mode)
    LCD_FUNCTION_2LINES = 0x08  # --DB3: two lines (0->one line)
    LCD_FUNCTION_10DOTS = 0x04  # --DB2: 5x10 font (0->5x7 font)
    LCD_FUNCTION_RESET = 0x30   # See "Initializing by Instruction" section

    LCD_CGRAM = 0x40            # DB6: set CG RAM address
    LCD_DDRAM = 0x80            # DB7: set DD RAM address

    LCD_RS_CMD = 0
    LCD_RS_DATA = 1

    LCD_RW_WRITE = 0
    LCD_RW_READ = 1

    def __init__(self, num_lines, num_columns):
        self.num_lines = num_lines
        if self.num_lines > 4:
            self.num_lines = 4
        self.num_columns = num_columns
        if self.num_columns > 40:
            self.num_columns = 40
        self.cursor_x = 0
        self.cursor_y = 0
        self.implied_newline = False
        self.backlight = True
        self.display_off()
        self.backlight_on()
        self.clear()
        self.hal_write_command(self.LCD_ENTRY_MODE | self.LCD_ENTRY_INC)
        self.hide_cursor()
        self.display_on()

    def clear(self):
        """Clears the LCD display and moves the cursor to the top left
        corner.
        """
        self.hal_write_command(self.LCD_CLR)
        self.hal_write_command(self.LCD_HOME)
        self.cursor_x = 0
        self.cursor_y = 0

    def show_cursor(self):
        """Causes the cursor to be made visible."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def hide_cursor(self):
        """Causes the cursor to be hidden."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def blink_cursor_on(self):
        """Turns on the cursor, and makes it blink."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR | self.LCD_ON_BLINK)

    def blink_cursor_off(self):
        """Turns on the cursor, and makes it no blink (i.e. be solid)."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY |
                               self.LCD_ON_CURSOR)

    def display_on(self):
        """Turns on (i.e. unblanks) the LCD."""
        self.hal_write_command(self.LCD_ON_CTRL | self.LCD_ON_DISPLAY)

    def display_off(self):
        """Turns off (i.e. blanks) the LCD."""
        self.hal_write_command(self.LCD_ON_CTRL)

    def backlight_on(self):
        """Turns the backlight on.
        This isn't really an LCD command, but some modules have backlight
        controls, so this allows the hal to pass through the command.
        """
        self.backlight = True
        self.hal_backlight_on()

    def backlight_off(self):
        """Turns the backlight off.
        This isn't really an LCD command, but some modules have backlight
        controls, so this allows the hal to pass through the command.
        """
        self.backlight = False
        self.hal_backlight_off()

    def move_to(self, cursor_x, cursor_y):
        """Moves the cursor position to the indicated position. The cursor
        position is zero based (i.e. cursor_x == 0 indicates first column).
        """
        self.cursor_x = cursor_x
        self.cursor_y = cursor_y
        addr = cursor_x & 0x3f
        if cursor_y & 1:
            addr += 0x40    # Lines 1 & 3 add 0x40
        if cursor_y & 2:    # Lines 2 & 3 add number of columns
            addr += self.num_columns
        self.hal_write_command(self.LCD_DDRAM | addr)

    def putchar(self, char):
        """Writes the indicated character to the LCD at the current cursor
        position, and advances the cursor by one position.
        """
        if char == '\n':
            if self.implied_newline:
                # self.implied_newline means we advanced due to a wraparound,
                # so if we get a newline right after that we ignore it.
                pass
            else:
                self.cursor_x = self.num_columns
        else:
            self.hal_write_data(ord(char))
            self.cursor_x += 1
        if self.cursor_x >= self.num_columns:
            self.cursor_x = 0
            self.cursor_y += 1
            self.implied_newline = (char != '\n')
        if self.cursor_y >= self.num_lines:
            self.cursor_y = 0
        self.move_to(self.cursor_x, self.cursor_y)

    def putstr(self, string):
        """Write the indicated string to the LCD at the current cursor
        position and advances the cursor position appropriately.
        """
        for char in string:
            self.putchar(char)

    def custom_char(self, location, charmap):
        """Write a character to one of the 8 CGRAM locations, available
        as chr(0) through chr(7).
        """
        location &= 0x7
        self.hal_write_command(self.LCD_CGRAM | (location << 3))
        self.hal_sleep_us(40)
        for i in range(8):
            self.hal_write_data(charmap[i])
            self.hal_sleep_us(40)
        self.move_to(self.cursor_x, self.cursor_y)

    def hal_backlight_on(self):
        """Allows the hal layer to turn the backlight on.
        If desired, a derived HAL class will implement this function.
        """
        pass

    def hal_backlight_off(self):
        """Allows the hal layer to turn the backlight off.
        If desired, a derived HAL class will implement this function.
        """
        pass

    def hal_write_command(self, cmd):
        """Write a command to the LCD.
        It is expected that a derived HAL class will implement this
        function.
        """
        raise NotImplementedError

    def hal_write_data(self, data):
        """Write data to the LCD.
        It is expected that a derived HAL class will implement this
        function.
        """
        raise NotImplementedError

    def hal_sleep_us(self, usecs):
        """Sleep for some time (given in microseconds)."""
        time.sleep_us(usecs)

lcd_api.py

"""
Log.py - a simplistic Logging process. Built to kind of mimic the
Android Logging process, but at the same time having a global level
set to see the types of logs being displayed.

Basic usage:

Log.level = DEBUG  # set global log level

# Options are: ALL/INFO (everything) DEBUG (debug and higher), ERRO (only errors)
Log.i(f'help')     # Info message: f-strings recommended for showing variables
Log.d(f'value: {v}') # Debug message
Log.e(f'Exception: {x}') # Error message
Log.name('Myproject') # Set a global project name
"""

""" Debug levels """
ALL = 4  # All messages are displayed
INFO = 3  # Basically the same as ALL - for future-proofing
DEBUG = 2  # Info is hidden - debug and higher shown
ERROR = 1  # Only error messages shown
NONE = 0  # No messages are shown from log classes


class Log:

    name = ''
    level = ALL

    @classmethod
    def i(cls, message):
        if (cls.level >= INFO):
            Log.pr(message)

    @classmethod
    def d(cls, message):
        if (cls.level >= DEBUG):
            Log.pr(message)

    @classmethod
    def e(cls, message):
        if (cls.level >= ERROR):
            Log.pr(message)

    @classmethod
    def pr(cls, message):
        if cls.name:
            m = cls.name + ": " + message
        else:
            m = message
        print(m)


if __name__ == '__main__':
    print("Hello")
    Log.level = ALL
    Log.name = 'Test'
    Log.i(f'This should print (level: {Log.level})')
    
    Log.level = ERROR
    Log.i(f'This should NOT print (level: {Log.level})')
    Log.e(f'This should print (level: {Log.level})')
    



Log.py

"""Source: Instructables, Tom's Hardware and GitHub """
"""Not Authored by Dr. Sengupta """

import utime
import gc

from lcd_api import LcdApi
from machine import I2C

# PCF8574 pin definitions
MASK_RS = 0x01       # P0
MASK_RW = 0x02       # P1
MASK_E  = 0x04       # P2

SHIFT_BACKLIGHT = 3  # P3
SHIFT_DATA      = 4  # P4-P7

class I2cLcd(LcdApi):
    
    #Implements a HD44780 character LCD connected via PCF8574 on I2C

    def __init__(self, i2c, i2c_addr, num_lines, num_columns):
        self.i2c = i2c
        self.i2c_addr = i2c_addr
        self.i2c.writeto(self.i2c_addr, bytes([0]))
        utime.sleep_ms(20)   # Allow LCD time to powerup
        # Send reset 3 times
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(5)    # Need to delay at least 4.1 msec
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(1)
        self.hal_write_init_nibble(self.LCD_FUNCTION_RESET)
        utime.sleep_ms(1)
        # Put LCD into 4-bit mode
        self.hal_write_init_nibble(self.LCD_FUNCTION)
        utime.sleep_ms(1)
        LcdApi.__init__(self, num_lines, num_columns)
        cmd = self.LCD_FUNCTION
        if num_lines > 1:
            cmd |= self.LCD_FUNCTION_2LINES
        self.hal_write_command(cmd)
        gc.collect()

    def hal_write_init_nibble(self, nibble):
        # Writes an initialization nibble to the LCD.
        # This particular function is only used during initialization.
        byte = ((nibble >> 4) & 0x0f) << SHIFT_DATA
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        gc.collect()
        
    def hal_backlight_on(self):
        # Allows the hal layer to turn the backlight on
        self.i2c.writeto(self.i2c_addr, bytes([1 << SHIFT_BACKLIGHT]))
        gc.collect()
        
    def hal_backlight_off(self):
        #Allows the hal layer to turn the backlight off
        self.i2c.writeto(self.i2c_addr, bytes([0]))
        gc.collect()
        
    def hal_write_command(self, cmd):
        # Write a command to the LCD. Data is latched on the falling edge of E.
        byte = ((self.backlight << SHIFT_BACKLIGHT) |
                (((cmd >> 4) & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        byte = ((self.backlight << SHIFT_BACKLIGHT) |
                ((cmd & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        if cmd <= 3:
            # The home and clear commands require a worst case delay of 4.1 msec
            utime.sleep_ms(5)
        gc.collect()

    def hal_write_data(self, data):
        # Write data to the LCD. Data is latched on the falling edge of E.
        byte = (MASK_RS |
                (self.backlight << SHIFT_BACKLIGHT) |
                (((data >> 4) & 0x0f) << SHIFT_DATA))
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        byte = (MASK_RS |
                (self.backlight << SHIFT_BACKLIGHT) |
                ((data & 0x0f) << SHIFT_DATA))      
        self.i2c.writeto(self.i2c_addr, bytes([byte | MASK_E]))
        self.i2c.writeto(self.i2c_addr, bytes([byte]))
        gc.collect()

pico_i2c_lcd.py

"""
..
"""
from Counters import *

class Stopwatch:

    def __init__(self):
        self._timekeeper = TimeKeeper()

    def play(self):
        self._timekeeper.start()

    def pause(self):
        self._timekeeper.stop()

    def reset(self):
        self._timekeeper.reset()

    def currentTime(self):
        return str(self._timekeeper)

Stopwatch.py

"""

"""
from Stopwatch import *
from Displays import *
from Button import *

class StopwatchController:

    def __init__(self):
        self._mystopwatch = Stopwatch()
        self._display = LCDDisplay(sda=0, scl=1)
        self._startstopbutton = Button(pin=21, name='startstop', handler=self)
        self._resetbutton = Button(pin=20, name='reset', handler = self)
        self._display.showText(self._mystopwatch.currentTime())
        self._running = False

    def buttonPressed(self, name):
        if name == 'startstop':
            if self._running:
                self._mystopwatch.pause()
                self._running = False
            else:
                self._mystopwatch.play()
                self._running = True
        elif name == 'reset':
            self._running = False
            self._mystopwatch.reset()
            self._display.showText(self._mystopwatch.currentTime())

    def buttonReleased(self, name):
        pass

    def run(self):
        while True:
            if self._running:
                self._display.showText(self._mystopwatch.currentTime())
                time.sleep(0.1)
