#include "thingProperties.h"
#include <LiquidCrystal_I2C.h>
#include "DHT.h"
#define DHTPIN 14
#define DHTTYPE DHT22
LiquidCrystal_I2C lcd(0x27,16,2);
DHT dht (DHTPIN,DHTTYPE);
const int potPin =34;
const int pinled =12;
int potValue =0;
void setup() {
  Serial.begin(9600);
  delay(500); 
  dht.begin();
  pinMode (pinled,OUTPUT);
  lcd.init();
  initProperties();
  ArduinoCloud.begin(ArduinoIoTPreferredConnection);
  setDebugMessageLevel(2);
  ArduinoCloud.printDebugInfo();
}

void loop() {
ArduinoCloud.update();
onhumidityChange();
onVoltageChange();
onMyLedChange();
Serial.print(F("Kelembaban: "));
Serial.print(humidity);
Serial.print(F("% Suhu: "));
Serial.print(temperatur);
Serial.print(F("°C "));  
Serial.print("Tegangan=");
Serial.print(voltage);
Serial.print("V");
Serial.print("Potensio(ADC)=");
Serial.print(potValue);
Serial.print(" LED=");
Serial.println(my_led);

lcd.clear();
lcd.setCursor(0, 0);
lcd.print("H:");
lcd.print(humidity);
lcd.print("%");
lcd.setCursor(9, 0);
lcd.print("T:");
lcd.print(temperatur);
lcd.print("C");
lcd.setCursor(0, 1);
lcd.print("V:");
lcd.print(voltage);
lcd.print("V");
lcd.setCursor(8, 1);
if(my_led==HIGH)
  lcd.print("Led ON");
else
  lcd.print("Led OFF");
}

void onhumidityChange() {
  float t = dht.readTemperature();
  float h = dht.readHumidity();
  if (isnan(h) || isnan(t)) {
    Serial.println(F("Gagal membaca data sensor"));
    return;
  }
  temperatur = t;
  humidity = h;
  delay(500);
}

void onVoltageChange() {
  potValue = analogRead(potPin);
   float v = potValue * (5.0/4096.0);
  voltage = v;
  delay(500);
}

void onMyLedChange()  {
   if(my_led==HIGH)
    digitalWrite(pinled, HIGH);
  else
    digitalWrite(pinled, LOW);
}