//>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 01_Test_DHT11_and_Switches
// Reference : https://github.com/adafruit/DHT-sensor-library/blob/master/examples/DHTtester/DHTtester.ino

#include <DHTesp.h>

#define DHTPIN  15
#define DHTTYPE DHT11

//#define Switch_1_PIN   13
//#define Switch_2_PIN   12

DHTesp dht;
void setup() {
  // put your setup code here, to run once:

  Serial.begin(115200);
  Serial.println();
  dht.setup(DHTPIN, DHTesp::DHT22);
  //pinMode(Switch_1_PIN, INPUT_PULLUP);
  //pinMode(Switch_2_PIN, INPUT_PULLUP);
  
  Serial.println(F("DHT11 test!"));
}

void loop() {
  // put your main code here, to run repeatedly:

  delay(8000);

  // Reading temperature or humidity takes about 250 milliseconds!
  // Sensor readings may also be up to 2 seconds 'old' (its a very slow sensor)
  float h = dht.getHumidity();
  // Read temperature as Celsius (the default)
  float t = dht.getTemperature();

  // Check if any reads failed and exit early (to try again).
  if (isnan(h) || isnan(t)) {
    Serial.println(F("Failed to read from DHT sensor!"));
    return;
  }

  Serial.print(F("Humidity : "));
  Serial.print(h);
  Serial.print(F("% | Temperature : "));
  Serial.print(t);
  //Serial.print(F("°C | Switch 1 : "));
  //Serial.print(digitalRead(Switch_1_PIN));
  //Serial.print(F(" | Switch 2 : "));
  //Serial.println(digitalRead(Switch_2_PIN));
}