#define ENCODER_CLK 4
#define ENCODER_DT  3
#define Enter_SW 12

void setup() {
  Serial.begin(115200);
  pinMode(ENCODER_CLK, INPUT);
  pinMode(ENCODER_DT, INPUT);
  pinMode(Enter_SW, INPUT_PULLUP);
}

int lastClk = HIGH;

void loop() {
  int newClk = digitalRead(ENCODER_CLK);
  int Enter=digitalRead(Enter_SW);

  if (newClk != lastClk) {
    // There was a change on the CLK pin
    lastClk = newClk;
    int dtValue = digitalRead(ENCODER_DT);
    if (newClk == LOW && dtValue == HIGH) {
      Serial.println("Rotated clockwise ⏩");
    }
    if (newClk == LOW && dtValue == LOW) {
      Serial.println("Rotated counterclockwise ⏪");
    }

  }
    if (Enter == 0) {
       Serial.println("Enter");
      delay(1000);
                  
        }

}