AI generated LED Chaser for ESP32 and 8 LEDs

This is the result of a dicussion about
using AI to generate Annex32-BASIC-Code
at https://cicciocb.com/forum/viewtopic.php?p=9797


help.txt

# Name,   Type, SubType, Offset,  Size, Flags
nvs,      data, nvs,     0x9000,  0x5000,
otadata,  data, ota,     0xe000,  0x2000,
app0,     app,  ota_0,   0x10000, 0x230000,
app1,     app,  ota_1,   0x240000,0x0C0000,
ffat,     data, fat,     0x300000,0x100000,
#spiffs,   data, spiffs,  0x301000,0xFF000,


partitions.csv


REM LED Chaser Light avoiding some GPIO pins
DIM LED_PIN(8)
DATA 26, 27, 32, 33, 25, 23, 21, 19 ' Safe pins for LED use
FOR I = 0 TO 7
    READ LED_PIN(I)
NEXT I

REM Setup all pins for output 
FOR I = 0 TO 7
    PIN.MODE LED_PIN(I), OUTPUT
NEXT I

REM Chaser Light Loop
DO
    REM Forward and Backward movement in one loop
    FOR I = 0 TO 14
        IF I > 7 THEN 
            J = 14 - I ' Reverse direction after first pass
        ELSE
            J = I ' Forward direction
        END IF

        FOR K = 0 TO 7
            PIN(LED_PIN(K))=0 ' Clear all LEDs
        NEXT K
        PIN(LED_PIN(J))=1 ' Light up current LED
        PAUSE 100 ' Delay for visibility
    NEXT I
LOOP
