int Pin2=2;
#include <Wire.h> 
#include <LiquidCrystal_I2C.h>
#include <DHT.h>

LiquidCrystal_I2C lcd(0x27,16,2);  //

#define DHTPIN 2
#define DHTTYPE DHT11
 
DHT dht(DHTPIN, DHTTYPE);
 
void setup() {
  lcd.init();
  lcd.backlight();

  Serial.begin(9600);
  dht.begin();  
  lcd.setCursor(0,0);
  lcd.print("C:");
  lcd.setCursor(8,0);
  lcd.print("F:");
  lcd.setCursor(0,1);
  lcd.print("H:");
  lcd.setCursor(8,1);
  lcd.print("Q:");
}
 
void loop() {
   
    lcd.setCursor(2,0);
    lcd.print(dht.readTemperature());
    delay(10);
     lcd.setCursor(10,0);
    lcd.print(dht.readTemperature(true));
    delay(10);
    lcd.setCursor(2,1);
    lcd.print(dht.readHumidity());
    delay(10);
  delay(5000);
 
  float h = dht.readHumidity();
  float t = dht.readTemperature();
  float f = dht.readTemperature(true);

   lcd.setCursor(10,1);
    lcd.print(dht.computeHeatIndex(t, h, false));
    delay(10);
 

  if (isnan(h) || isnan(t) || isnan(f)) {
    Serial.println("Error obteniendo los datos del sensor DHT11");
    return;
  }
 
  float hif = dht.computeHeatIndex(f, h);
  float hic = dht.computeHeatIndex(t, h, false);
 
  Serial.print("Humedad: ");
  Serial.print(h);
  Serial.print(" %\t");
  Serial.print("Temperatura: ");
  Serial.print(t);
  Serial.print(" *C ");
  Serial.print(f);
  Serial.print(" *F\t");
  Serial.print("Índice de calor: ");
  Serial.print(hic);
  Serial.print(" *C ");
  Serial.print(hif);
  Serial.println(" *F");
 
}