/*
 * Simple example for how to use multiple SinricPro Switch device:
 * - setup 4 switch devices
 * - handle request using multiple callbacks
 * 
 * If you encounter any issues:
 * - check the readme.md at https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md
 * - ensure all dependent libraries are installed
 *   - see https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md#arduinoide
 *   - see https://github.com/sinricpro/esp8266-esp32-sdk/blob/master/README.md#dependencies
 * - open serial monitor and check whats happening
 * - check full user documentation at https://sinricpro.github.io/esp8266-esp32-sdk
 * - visit https://github.com/sinricpro/esp8266-esp32-sdk/issues and check for existing issues or open a new one
 */

// Uncomment the following line to enable serial debug output
//#define ENABLE_DEBUG

#ifdef ENABLE_DEBUG
  #define DEBUG_ESP_PORT Serial
  #define NODEBUG_WEBSOCKETS
  #define NDEBUG
#endif 

#include <Arduino.h>
#if defined(ESP8266)
  #include <ESP8266WiFi.h>
#elif defined(ESP32) || defined(ARDUINO_ARCH_RP2040)
  #include <WiFi.h>
#endif

#include "SinricPro.h"
#include "SinricProSwitch.h"

#define WIFI_SSID         "Wokwi-GUEST"    
#define WIFI_PASS         ""
#define APP_KEY           "0a70d4b6-ebcd-4373-b3d3-c4a3dabb43b5"      // Should look like "de0bxxxx-1x3x-4x3x-ax2x-5dabxxxxxxxx"
#define APP_SECRET        "fa1c7713-0734-4dee-a84f-13d5fe555520-49bf933d-33a4-44f8-adf2-13a11302e6bd"   // Should look like "5f36xxxx-x3x7-4x3x-xexe-e86724a9xxxx-4c4axxxx-3x3x-x5xe-x9x3-333d65xxxxxx"

#define SWITCH_ID_1       "67945043cc6fea0ed3ef2905"    // Should look like "5dc1564130xxxxxxxxxxxxxx"
#define SWITCH_ID_2       "67943b74b15d6ea198e87cee"    // Should look like "5dc1564130xxxxxxxxxxxxxx"
#define SWITCH_ID_3       "6794500bf25540068f86f739"    // Should look like "5dc1564130xxxxxxxxxxxxxx"
#define SWITCH_ID_4       "YOUR-DEVICE-ID"    // Should look like "5dc1564130xxxxxxxxxxxxxx"

#define lampu_teras    17
#define lampu_kelas    18
#define lampu_belakang 19
#define BAUD_RATE         115200                // Change baudrate to your need

bool onPowerState1(const String &deviceId, bool &state) {
  Serial.printf("Device 1 turned %s\r\n", state?"on":"off");
  digitalWrite(lampu_belakang,state);
  return true; // request handled properly
}

bool onPowerState2(const String &deviceId, bool &state) {
  Serial.printf("Device 2 turned %s\r\n", state?"on":"off");
  digitalWrite(lampu_kelas,state);
  return true; // request handled properly
}

bool onPowerState3(const String &deviceId, bool &state) {
  Serial.printf("Device 3 turned %s\r\n", state?"on":"off");
  digitalWrite(lampu_teras,state);
  return true; // request handled properly
}

bool onPowerState4(const String &deviceId, bool &state) {
  Serial.printf("Device 4 turned %s\r\n", state?"on":"off");
  return true; // request handled properly
}


// setup function for WiFi connection
void setupWiFi() {
  Serial.printf("\r\n[Wifi]: Connecting");

  #if defined(ESP8266)
    WiFi.setSleepMode(WIFI_NONE_SLEEP); 
    WiFi.setAutoReconnect(true);
  #elif defined(ESP32)
    WiFi.setSleep(false); 
    WiFi.setAutoReconnect(true);
  #endif

  WiFi.begin(WIFI_SSID, WIFI_PASS); 

  while (WiFi.status() != WL_CONNECTED) {
    Serial.printf(".");
    delay(250);
  }

  Serial.printf("connected!\r\n[WiFi]: IP-Address is %s\r\n", WiFi.localIP().toString().c_str());
}

// setup function for SinricPro
void setupSinricPro() {
  // add devices and callbacks to SinricPro
  SinricProSwitch& mySwitch1 = SinricPro[SWITCH_ID_1];
  mySwitch1.onPowerState(onPowerState1);

  SinricProSwitch& mySwitch2 = SinricPro[SWITCH_ID_2];
  mySwitch2.onPowerState(onPowerState2);

  SinricProSwitch& mySwitch3 = SinricPro[SWITCH_ID_3];
  mySwitch3.onPowerState(onPowerState3);

  SinricProSwitch& mySwitch4 = SinricPro[SWITCH_ID_4];
  mySwitch4.onPowerState(onPowerState4);

  // setup SinricPro
  SinricPro.onConnected([](){ Serial.printf("Connected to SinricPro\r\n"); }); 
  SinricPro.onDisconnected([](){ Serial.printf("Disconnected from SinricPro\r\n"); });
  SinricPro.begin(APP_KEY, APP_SECRET);
}

// main setup function
void setup() {
  Serial.begin(BAUD_RATE); Serial.printf("\r\n\r\n");
  setupWiFi();
  setupSinricPro();
  pinMode(lampu_teras,OUTPUT);
  pinMode(lampu_kelas,OUTPUT);
  pinMode(lampu_belakang,OUTPUT); 
}

void loop() {
  SinricPro.handle();
}