#include <WiFi.h>
#include "PubSubClient.h"
#include <LiquidCrystal_I2C.h>
#include <Adafruit_Sensor.h>

#define I2C_ADDR    0x27
#define LCD_COLUMNS 20
#define LCD_LINES   4

LiquidCrystal_I2C lcd(I2C_ADDR, LCD_COLUMNS, LCD_LINES);

const char * MQTTServer = "broker.emqx.io";
const char * MQTT_Topic = "face_id";

// Tạo ID ngẫu nhiên tại: https://www.guidgen.com/
const char * MQTT_ID = "325425";
int Port = 1883;

WiFiClient espClient;
PubSubClient client(espClient);

void WIFIConnect() {
  Serial.println("Connecting to SSID: Wokwi-GUEST");
  WiFi.begin("Wokwi-GUEST", "");
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.print("WiFi connected");
  Serial.print(", IP address: ");
  Serial.println(WiFi.localIP());
}

void MQTT_Reconnect() {
  while (!client.connected()) {
    if (client.connect(MQTT_ID)) {
      Serial.print("MQTT Topic: ");
      Serial.print(MQTT_Topic);
      Serial.print(" connected");
      client.subscribe(MQTT_Topic);
      Serial.println("");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      delay(5000);
    }
  }
}

void callback(char* topic, byte* message, unsigned int length) {
  Serial.print("Message arrived on topic: ");
  Serial.println(topic);
  Serial.print("Message: ");
  String stMessage;

  for (int i = 0; i < length; i++) {
    Serial.print((char)message[i]);
    stMessage += (char)message[i];
  }

  Serial.println();

  if(stMessage == "sai"){
    // Print something
    lcd.setCursor(0, 1);
    lcd.print("Cua khoa    ");
  }else if(stMessage == "dung"){
    // Print something
    lcd.setCursor(0, 1);
    lcd.print("Cua mo     ");
  }
}

void setup() {
  Serial.begin(115200);

  WIFIConnect();
  client.setServer(MQTTServer, Port);
  client.setCallback(callback);

  // Init
  lcd.init();
  lcd.backlight();

  lcd.setCursor(0, 0);
  lcd.print("Cua thong minh");

  lcd.setCursor(0, 1);
  lcd.print("Cua khoa    ");
}

void loop() {
  delay(10);
  if (!client.connected()) {
    MQTT_Reconnect();
  }
  client.loop();
}