// Define pins for the ultrasonic sensor
const int trigPin = 34;
const int echoPin = 35;

// Variable to store duration and distance
long duration;
int distance;

void setup() {
  // Initialize serial communication
  Serial.begin(9600);

  // Set trigPin as OUTPUT and echoPin as INPUT
  pinMode(trigPin, OUTPUT);
  pinMode(echoPin, INPUT);
}

void loop() {
  // Clear the trigPin by setting it LOW
  digitalWrite(trigPin, LOW);
  delayMicroseconds(2);

  // Set the trigPin HIGH for 10 microseconds
  digitalWrite(trigPin, HIGH);
  delayMicroseconds(10);
  digitalWrite(trigPin, LOW);

  // Read the echoPin, returns the sound wave travel time in microseconds
  duration = pulseIn(echoPin, HIGH);

  // Calculate the distance in cm
  distance = duration * 0.034 / 2;

  // Print the distance on the Serial Monitor
  Serial.print("Distance: ");
  Serial.print(distance);
  Serial.println(" cm");
  delay(100);  // Wait before the next reading
}