//2 displays
//https://lastminuteengineers.com/esp32-pinout-reference/
/*
    [ "esp:TX0", "$serialMonitor:RX", "", [] ],
    [ "esp:RX0", "$serialMonitor:TX", "", [] ],
    [ "esp:GND.1", "led1:C", "black", [ "v-0.1", "h66.9", "v19.2" ] ],
    [ "led1:A", "r1:2", "green", [ "v0" ] ],
    [ "esp:D15", "r1:1", "green", [ "h0" ] ],
    [ "epd1:GND", "esp:GND.2", "black", [ "h-153.6", "v67.23" ] ],
    [ "epd1:VCC", "esp:3V3", "red", [ "h-144", "v86.33", "h-57.3" ] ],
    [ "epd1:DIN", "esp:D23", "green", [ "h-48", "v-38.57" ] ],
    [ "esp:D18", "epd1:CLK", "green", [ "h18.9", "v-172.73" ] ],
    [ "esp:D5", "epd1:CS", "green", [ "h28.5", "v-192" ] ],
    [ "epd1:DC", "esp:D17", "blue", [ "h-38.4", "v-38.4", "h-297.6", "v115.5" ] ],
    [ "esp:D26", "epd1:RST", "green", [ "h-28.8", "v-115.3", "h297.6", "v38.4" ] ],
    [ "esp:D25", "epd1:BUSY", "green", [ "h-19.2", "v-115.2", "h297.6", "v38.4" ] ],
    [ "esp:D27", "epd1:DC", "blue", [ "h-48", "v-115.5", "h307.2", "v38.4" ] ]
*/

//GxEPD2_BW<GxEPD2_290_T94_V2, GxEPD2_290_T94_V2::HEIGHT> display(GxEPD2_290_T94_V2(
//    /*CS=*/5, /*DC=*/27, /*RST=*/26, /*BUSY=*/25
//    // /*CS=*/ 5, /*DC=*/ 2, /*RST=*/ 0, /*BUSY=*/ 4
//    )); // GDEM029T94 128x296, SSD1680, Waveshare 2.9" V2 variant


#define LED2 15

// *****************************************************************************************************
//     HELLO WORLD:  ESP32 on ePaper 2.90" 128x296                                    created: Dec.2023
//     ============  

//
// ESP32 ---> 2.13 inch e-paper SPI
// ePaper========>=====wokwi-esp32-devkit-v1
// BUSY     ----->     25                   
// RST      ----->     26                  
// DC MISO? ----->     27                   
// CS       ----->     5         
// CLK/SCK  ----->     18        
// DIN MOSI ----->     23       
// GND      ----->     GND
// 3V3      ----->     VCC
// *****************************************************************************************************

//
//nke
/*
"connections": [
    [ "esp:TX", "$serialMonitor:RX", "", [] ],
    [ "esp:RX", "$serialMonitor:TX", "", [] ],
    [ "esp:GND.1", "led1:C", "black", [ "v-0.1", "h66.9", "v19.2" ] ],
    [ "led1:A", "r1:2", "green", [ "v0" ] ],
    [ "esp:D15", "r1:1", "green", [ "h0" ] ],
    [ "epd1:GND", "esp:GND.2", "black", [ "h-153.6", "v67.23" ] ],
    [ "epd1:VCC", "esp:3V3", "red", [ "h-144", "v86.33", "h-57.3" ] ],
    [ "epd1:DIN", "esp:D23", "green", [ "h-48", "v-38.57" ] ],     ==>MOSI 23
    [ "esp:D18", "epd1:CLK", "green", [ "h18.9", "v-172.73" ] ],
    [ "esp:D5", "epd1:CS", "green", [ "h28.5", "v-192" ] ],
    [ "epd1:DC", "esp:D27", "green", [ "h-38.4", "v-38.4", "h-297.6", "v115.5" ] ],
    [ "esp:D26", "epd1:RST", "green", [ "h-28.8", "v-115.3", "h297.6", "v38.4" ] ],
    [ "esp:D25", "epd1:BUSY", "green", [ "h-19.2", "v-115.2", "h297.6", "v38.4" ] ]
  ],*/

#define CS   5                           // 15 CS         5  pin# std.S3 10        (ESP32 5)  
#define DC   27 //22                          // 21 DC         22 pin# std.S3 14        (ESP32 2) 
#define RSET 26 //21                          // 22 RST        21 pin# std.S3 13        (ESP32 0)
#define BUSY 25 //4                           // 23 BUSY       4  pin# std.S3 9 or 46   (ESP32 4)
#define MOSI 23                          // 5  MOSI Data  23 HW  pin# std.S3 11    (ESP32 23)
#define SCLK 18                          // 4  CLK  Clock 18 HW  pin# std.S3 12    (ESP32 18)
#define MISO -1                          // -1 MISO       -  pin# std.S3 -         (ESP32 -)

//#define useGxEPDlib //WERKT NOG NIET MET GxEPD2
#ifdef useGxEPDlib
// ===== Versuch mit alter GxEPD.h library ===================================================================
#include <GxEPD.h>
#include <GxGDEM029T94/GxGDEM029T94.h>   
#include <GxIO/GxIO_SPI/GxIO_SPI.h>
#include <GxIO/GxIO.h>  
#include <SPI.h>
#include <Fonts/FreeMonoBold9pt7b.h>
//#include <Fonts/FreeMonoBold12pt7b.h>


GxIO_Class io(SPI, CS, DC, RSET);       // GxIO_Class io(SPI,  EPD_CS, EPD_DC,  EPD_RSET); 
GxEPD_Class display(io, RSET, BUSY);    // GxEPD_Class display(io, EPD_RSET, EPD_BUSY); 
// ====================================================================================================
//
#else

// ===== Versuch mit GxEPD2.h library ===================================================================
//#include <GxEPD2_BW.h>
#include <GxEPD2_3C.h>
//#include <GxEPD2_7C.h>
#include <Fonts/FreeMonoBold9pt7b.h>
#include <Fonts/FreeMonoBold12pt7b.h>
//#include <Fonts/FreeSerif9pt7b.h>

#include <Adafruit_GFX.h>                 // Core graphics library
#include <SPI.h>

GxEPD2_3C<GxEPD2_290_C90c, GxEPD2_290_C90c::HEIGHT> display(GxEPD2_290_C90c(CS, DC, RSET, BUSY));  // GDEM029C90 128x296, SSD1680

// ====================================================================================================
#endif

const char TextBsp[] = "Irgendein Text";

int cnt;            // counter zum Testen des Beispiels mit alter GxEPD library

const char HelloWorld[] = "Hello World!";

void helloWorld()
{
  //Serial.println("helloWorld");
  display.setRotation(1);
  display.setFont(&FreeMonoBold9pt7b);
  display.setTextColor(GxEPD_BLACK);
  int16_t tbx, tby; uint16_t tbw, tbh;
  display.getTextBounds(HelloWorld, 0, 0, &tbx, &tby, &tbw, &tbh);
  // center bounding box by transposition of origin:
  uint16_t x = ((display.width() - tbw) / 2) - tbx;
  uint16_t y = ((display.height() - tbh) / 2) - tby;
  // full window mode is the initial mode, set it anyway
  display.setFullWindow();
  display.fillScreen(GxEPD_WHITE);
  display.setCursor(x, y);
  display.print(HelloWorld);
  display.display(false); // full update
  //Serial.println("helloWorld done");
}

void setup()
{ Serial.begin(9600);
  pinMode(LED2, OUTPUT);
  #ifdef useGxEPDlib
  Serial.println("Using GxEPDlib");

  SPI.begin(SCLK, MISO, MOSI);                     // GxEPD library alt, Definition     
  display.init();                                  // alte und neue library, Initialisierung 
  //display.init(115200);                          // default 10ms reset pulse, e.g. for bare panels with DESPI-C02
  //display.init(115200, true, 2, false);          // USE THIS for Waveshare boards with "clever" reset circuit, 2ms reset pulse
  
  #else
  Serial.println(">>>>>>>>>>> Using GxEPD2");
  display.init(115200, true, 2, false); // USE THIS for Waveshare boards with "clever" reset circuit, 2ms reset pulse
  helloWorld();
  delay(1000);

  #endif
  /* 
  display.setRotation(1);
  display.fillScreen(GxEPD_WHITE);
  display.setFont(&FreeMonoBold9pt7b);
  display.setTextColor(GxEPD_BLACK);
  
  int16_t tbx, tby; uint16_t tbw, tbh;
  display.getTextBounds(TextBsp, 0, 0, &tbx, &tby, &tbw, &tbh);
  // center the bounding box by transposition of the origin:
  uint16_t x = ((display.width() - tbw) / 2) - tbx;
  uint16_t y = ((display.height() - tbh) / 2) - tby;
  // display.setFullWindow();                        // wozu?
  
  display.firstPage();                               // variant with do... while   
  do
  { display.setCursor(x, y);
    //display.print(TextBsp);
    display.print("ein Blabla ");
    //display.setFont(u8g2_font_helvB18_tf);         // Set the font to Helvetica Bold 18
    //display.setCursor(10, 10);                     // Set the cursor to the top left corner
    //display.print("Hello, world!");                // Print 
    //display.setFont(u8g2_font_helvB12_tf);         // Set the font to Helvetica Bold 12
    //display.setCursor(20, 20);                     // Set the cursor to the second line
    //display.print("Text in Setup()");              // Print 
  }
  while (display.nextPage());
  
  display.hibernate();                               // original Zingg, what for?

  Serial.println(TextBsp);                        
  */
}
void loop(){
  digitalWrite(LED2, HIGH);
  delay(500);
  digitalWrite(LED2, LOW);
  delay(500);
}

void loopxxx() 
{
  display.setRotation(1);
  display.fillScreen(GxEPD_WHITE);
  display.setTextColor(GxEPD_BLACK);
  display.setFont(&FreeMonoBold9pt7b);
  display.setCursor(10, 30);
  display.println("Hello World");
  //display.setFont(&FreeMonoBold12pt7b);
  display.printf("Loop Anzahl %d",cnt);
  cnt++;
  
  delay(10000);
  
  
  
  display.setRotation(1);
  display.fillScreen(GxEPD_WHITE);
  display.setTextColor(GxEPD_BLACK);
  display.setFont(&FreeMonoBold9pt7b);
  display.setFont(&FreeMonoBold12pt7b);
  display.setCursor(10, 20);
  display.println("Text in Loop()");
  display.display();                                 // Update the display  
                                 // nur GxEPD alt
  Serial.print("im Loop()...");
  delay(10000);                                       // Wait before clearing the display and drawing again
  
};