//https://forum.arduino.cc/t/slot-car-lap-counter/1376016
/*
  SN74HC595/6  PIN Equivalente
  14 DS	   14 SER     SERIAL_IN
  13 OE	   13 OE      GND
  12 STCP	 12 RCLK    LATCH
  11 SHCP	 11 SRCLK   CLOCK
  10 MR	   10 SRCLR   +V
  9 Q7S    9 QH      SERIAL_OUT
  15 Q0  A
   1 Q1  F
   2 Q2  G
   3 Q3  E
   4 Q4  D
   5 Q5  C
   6 Q6  B
   7 Q7  DP

  #define SER 7    //data
  #define RCLK 5  // LATCH
  #define SRCLK 6  //            CLOCK
*/
int SRCLK = 6;//SHcp pin of 74HC595
int RCLK = 5;//STcp pin of 74HC595
int SER = 7;//ds pin of 74HC595
int digit1, digit2, digit3, digit4;
byte segmentsBits[] =    {B01111011, //0
                          B01100000, //1
                          B01011101, //2
                          B01110101, //3
                          B01100110, //4
                          B00110111, //5
                          B00111111, //6
                          B01100001, //7
                          B01111111, //8
                          B01110111 //9
                         };

byte score1 = 0;
byte score2 = 0;
#define sns1 2
#define sns2 3

//------------------------------------------------------------------
void setup() {
  pinMode(SRCLK, OUTPUT);
  pinMode(RCLK, OUTPUT);
  pinMode(SER, OUTPUT);
  digitalWrite(SRCLK, LOW);
  digitalWrite(RCLK, LOW);
  digitalWrite(SER, LOW);
  pinMode(sns1, INPUT_PULLUP);
  pinMode(sns2, INPUT_PULLUP);
}
//------------------------------------------------------------------
void loop() {
  if (digitalRead(sns1) == LOW) {
    delay(30);
    if (digitalRead(sns1) == LOW) {
      while (digitalRead(sns1) == LOW) {}
      score1++;
      if (score1  > 99 )score1 = 0;
    }
  }
  if (digitalRead(sns2) == LOW) {
    delay(30);
    if (digitalRead(sns2) == LOW) {
      while (digitalRead(sns2) == LOW) {}
      score2++;
      if (score2  > 99 )score2 = 0;
    }
  }
  digit1 = score1 % 10 ; // gets dec
  showDig(digit1, 0xFD);
  digit2 = (score1 / 10) % 10 ; //gets unit
  showDig(digit2, 0xFE);
  digit3 = score2 % 10 ; //gets dec
  showDig(digit3, 0xFB);
  digit4 = (score2 / 10) % 10 ; //gets unit
  showDig(digit4, 0xF7);
}
//---------------------------------------------------------------------
void showDig(int digit, byte digitBits) {
  digitalWrite(RCLK, LOW);
  shiftOut(SER, SRCLK, MSBFIRST, digitBits);
  shiftOut(SER, SRCLK, MSBFIRST, segmentsBits[ digit]);
  digitalWrite(RCLK, HIGH);
  delay(1);
}