from machine import Pin, PWM, ADC
import utime

# Pin Setup
ldr = ADC(28)          # Pin AO dari LDR ke GP28
ldr_digital = Pin(0, Pin.IN)  # Pin DO dari LDR ke GP0 (kalau mau dipakai nanti)
led = Pin(6, Pin.OUT)  # LED di GP6
buzzer = PWM(Pin(15))  # Buzzer di GP15 dengan PWM

# Konfigurasi PWM Buzzer
buzzer.freq(1000)       # Frekuensi awal buzzer (1kHz)
buzzer.duty_u16(0)      # Mulai dengan buzzer mati

# Fungsi untuk mengonversi nilai ADC ke lux
def adc_to_lux(adc_value):
    normalized_adc = (adc_value - 512) / (65007 - 512)  # Normalisasi ADC
    lux = normalized_adc * 990 + 10  # Rentang 10 - 1000 lux
    return lux

# Variabel untuk menyimpan kondisi normal awal


# Variabel untuk kedip LED
last_blink_time = utime.ticks_ms()
led_state = False
led_should_blink = False  # hanya True saat kondisi mendeteksi perubahan cahaya signifikan

# Loop utama
while True:
    analog_value = ldr.read_u16()
    lux = adc_to_lux(analog_value)
    lux_akhir= 1000-lux

    print(f"LDR Value: {analog_value} | Lux: {lux_akhir}")

    if lux_akhir >  200:
        led_should_blink = True  # nyalakan mode kedip
        buzzer.duty_u16(int(0.45 * 65535))   # nyalakan buzzer
        for i in range(500, 1000, 100):  # variasi frekuensi buzzer
            buzzer.freq(i)
            utime.sleep(0.1)
    else:
        led_should_blink = False
        led.off()
        buzzer.duty_u16(0)

    # Kedip LED jika perlu
    if led_should_blink:
        current_time = utime.ticks_ms()
        if utime.ticks_diff(current_time, last_blink_time) >= 4000:
            led_state = not led_state
            led.value(led_state)
            last_blink_time = current_time
    else:
        led.off()

    utime.sleep(0.1)  # sedikit delay supaya tidak terlalu cepat baca LDR