/*
  Link: https://projecthub.arduino.cc/mircemk/arduino-fft-audio-spectrum-analyzer-on-8x32-color-matrix-ws2812b-e07b35

  Copyright (c) 2020 Janux

  Permission is hereby granted,   free of charge, to any person obtaining a copy
  of this software and associated   documentation files (the "Software"), to deal
  in the Software without restriction,   including without limitation the rights
  to use, copy, modify, merge, publish,   distribute, sublicense, and/or sell
  copies of the Software, and to permit persons   to whom the Software is
  furnished to do so, subject to the following conditions:
   The above copyright notice and this permission notice shall be included in all
   copies or substantial portions of the Software.
  THE SOFTWARE IS PROVIDED   "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  IMPLIED, INCLUDING BUT   NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  FITNESS FOR A PARTICULAR   PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  AUTHORS OR COPYRIGHT HOLDERS   BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  LIABILITY, WHETHER IN AN ACTION OF   CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  OUT OF OR IN CONNECTION WITH THE   SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
  SOFTWARE.

  Based on an   original project for the MAX72xx LED matrix and FFT lib made from Shajeeb.
  Configuration   settings section based on work of Ragnar Ranøyen Homb from Norvegian Creation.
*/

/* FHT Library - http://wiki.openmusiclabs.com/wiki/ArduinoFHT */

#define LIN_OUT 1                //FHT linear output magnitude
#define FHT_N 128                //set SAMPLES for FHT, Must be a power of 2
#include "FHT.h"

#define xres 32                 //Total number of columns in the display, must be <= SAMPLES/2
#define yres 8                  //Total number of rows in the display
#define ledPIN 3                //output pin to control Leds
#define NUM_LEDS (xres * yres)  //total   leds in Matrix
#include <Adafruit_NeoPixel.h>
#include <Adafruit_NeoMatrix.h>
#include <Adafruit_GFX.h>

#define colorPIN 5        //pin to change ledcolor
#define brightnessPIN 10  //pin to change brightness

byte displaycolor = 5;    //default color value
byte brightness = 7;     //default brightness level

#include <EEPROM.h>
#define CONFIG_START 32         //Memory   start location
#define CONFIG_VERSION "VER01"  //Config version configuration

typedef struct {
  char version[6];
  byte displaycolor;
  byte brightness;
}   configuration_type;

configuration_type CONFIGURATION = {
  CONFIG_VERSION,
  displaycolor,
  brightness
};

byte yvalue;
int peaks[xres];
byte state = HIGH;                      // the current reading from the input pin
byte previousState = LOW;               // the previous reading from the input pin
unsigned long lastDebounceTime = 0;   // the last time the output pin was toggled
unsigned long debounceDelay = 100;    // the debounce time; increase if the output flickers

byte data_avgs[xres]; //Array for samplig

// Parameter 1 = number of leds in matrix
// Parameter 2 = pin number
// Parameter 3 = pixel type flags, add together as needed:
//   NEO_KHZ800  800 KHz bitstream (most NeoPixel products w/WS2812 LEDs)
//   NEO_KHZ400  400 KHz (classic 'v1' (not v2) FLORA pixels, WS2811 drivers)
//   NEO_GRB     Pixels   are wired for GRB bitstream (most NeoPixel products)
//   NEO_RGB     Pixels   are wired for RGB bitstream (v1 FLORA pixels, not v2)
Adafruit_NeoPixel pixel = Adafruit_NeoPixel(NUM_LEDS, ledPIN, NEO_GRB + NEO_KHZ800);

// EQ filter
byte eq[32] = {
  60, 65, 70, 75, 80, 85, 90, 95,
  100, 100, 100, 100, 100, 100, 100, 100,
  100, 100, 100, 100, 100, 100, 100, 100,
  115, 125, 140, 160, 185, 200, 200, 200
};

bool EQ_ON = true; // set to false to disable eq

//Define   5 set of colors for leds, 0 for single custom color
byte colors[][8] = {
  {170, 160, 150, 140, 130, 120, 1, 1},
  {1, 5, 10, 15, 20, 25, 90, 90},
  {90, 85, 80, 75, 70, 65, 1, 1},
  {90, 90, 90, 30, 30, 30, 1, 1},
  {170, 160, 150, 140, 130, 120, 110, 0}
};

//Define chars for display settings
byte   charBitmap[] = {
  0x1C, 0x10, 0x10, 0x10, 0x10, 0x1C,   // C
  0x08, 0x18, 0x08, 0x08, 0x08, 0x1C,   // 1
  0x0C, 0x12, 0x04, 0x08, 0x10, 0x1E,   // 2
  0x0C, 0x12, 0x02, 0x06, 0x12, 0x0C,   // 3
  0x10, 0x10, 0x10, 0x14, 0x1E, 0x04,   // 4
  0x1E, 0x10, 0x1E, 0x02, 0x12, 0x0C,   // 5 
  0x1E, 0x10, 0x10, 0x1E, 0x12, 0x1E,   // 6
  0x1E, 0x02, 0x04, 0x08, 0x08, 0x08,   // 7
  0x0C, 0x12, 0x0C, 0x12, 0x12, 0x0C,   // 8
  0x1C, 0x12, 0x1C, 0x12, 0x12, 0x1C    // B
};

void   setup() {

  // Start the serial monitor
  Serial.begin(500000);

  // Wait for serial monitor to connect before proceeding any further
  while (!Serial) {
    ;
  }

  Serial.println("FFT Audio Spectrum - Simulated ADC Input");

  pixel.begin();           //initialize Led Matrix

  //Begin   FFT operations
  ADCSRA = 0b11100101;    // set ADC to free running mode and   set pre-scaler to 32 (0xe5)
  ADMUX =  0b00000000;    // use pin A0 and external   voltage reference

  // Read config data from EEPROM
  if (loadConfig())   {
    displaycolor = CONFIGURATION.displaycolor;
    brightness = CONFIGURATION.brightness;
   }

  //Set brightness loaded from EEPROM
  pixel.setBrightness(brightness * 24 + 8);

  //Show current config on start
  //change true to false if you don't want this
  showSettings(3, true);

}

int LoopCount = 0;

void loop() {

  int LoopCount = 0;
  int IncrementCount = 0;

  for (int i = 0; i <= 255; i++)   {
    // led = GetLedFromMatrix(x, i); //retrieve current led by x,y coordinates
    int led = i; 
    
    pixel.setPixelColor(led, 255, 255, 255);   //white
    pixel.show(); 

    delay(50);
  }

  delay(1000);
  pixel.clear();
  delay(1000);

}

void Sampling() {
  for (int i = 0; i < FHT_N; i++) {
    while   (!(ADCSRA & 0x10));   // wait for ADC to complete current conversion ie ADIF bit   set
    ADCSRA =  0xf6 ;              // clear ADIF bit so that ADC can do next operation (0xf5)
    //ADLAR bit is 0, so the 10 bits of ADC Data registers are right aligned
    byte m = ADCL;              // fetch adc data
    byte j = ADCH;
    int value = (j << 8) | m;   // form into an int
    
    // Simulate ADC input using random number 10 bits in size
    int randNumber = random(0, 1023);
    value = randNumber;
    // End Simulate ADC input
    
    value -= 0x0200;            // form into a signed int
    value <<= 6;                // form into a 16b signed int
    fht_input[i] = value / 8;   // copy to fht input array after compressing
  }
  // ++ begin FHT data process -+-+--+-+--+-+--+-+--+-+--+-+--+-+-
  fht_window();    // window the data for better frequency response
  fht_reorder();   // reorder the data before doing the fht
  fht_run();       // process the   data in the fht
  fht_mag_lin();   // take the output of the fht
}

void   RearrangeFHT() {
  // FHT return real value unsing only one array
  // after   fht_mag_lin() calling the samples value are in
  // the first FHT_N/2 position   of the array fht_lin_out[]
  int step = (FHT_N / 2) / xres;
  int c = 0;
   for (int i = 0; i < (FHT_N / 2); i += step) {
    data_avgs[c] = 0;
    for   (int k = 0 ; k < step ; k++) {
      data_avgs[c] = data_avgs[c] + fht_lin_out[i + k];  // linear output magnitude
    }
    data_avgs[c] = data_avgs[c] / step ; // save avgs value
    c++;
  }
}

void SendToDisplay() {
   for (int i = 0; i < xres; i++) {
    if (EQ_ON) data_avgs[i] = data_avgs[i] * (float)(eq[i]) / 100; // apply eq filter
    data_avgs[i] = constrain(data_avgs[i], 0, 80);                 // set max & min values for buckets to 0-80
    data_avgs[i] = map(data_avgs[i], 0, 80, 0, yres);              // remap averaged values to yres 0-8
    yvalue = data_avgs[i];

    // yvalue = 6;

    peaks[i] = peaks[i] - 1;                                       // decay by one light
    if (yvalue > peaks[i]) peaks[i] = yvalue;                      // save peak if > previuos peak
    yvalue = peaks[i];                                             // pick peak to display
    setColumn(i, yvalue);                                          // draw columns
  }
  pixel.show();                                                    // show column
}

// Light up leds of x column according to y value
void   setColumn(byte x, byte y) {
  int led, i;

  for (i = 0; i < yres; i++)   {
    led = GetLedFromMatrix(x, i); //retrieve current led by x,y coordinates

    if (peaks[x] > (yres - (i + 1))) {

      switch (displaycolor) {
        case 3:
          // use white for all columns
          pixel.setPixelColor(led, 255, 255, 255);   //white
          break;

        case 4:
           if (colors[displaycolor][i] == 0) {
            // show custom color with zero value in array
            pixel.setPixelColor(led, 255, 255, 255);   //white
          }
          else {
            // standard color defined in colors array
            pixel.setPixelColor(led, Wheel(colors[displaycolor][i]));
           }
          break;

        case 5:
          //change color by column
          pixel.setPixelColor(led, Wheel(x * 16));
          break;

        case 6:
          //change color by row
          pixel.setPixelColor(led, Wheel(i * y * 3));
          break;

        case 7:
          //change color by... country :D

          //Italy flagh
          //if (x < 11) pixel.setPixelColor(led, 0, 255, 0);
          //if (x > 10 && x < 21) pixel.setPixelColor(led, 255, 255, 255);
          //if (x > 20) pixel.setPixelColor(led, 255, 0, 0);

           //stars and stripes
          if (i < yres - 2) {
            if   (x & 0x01) {
              pixel.setPixelColor(led, 0, 0, 255);
            }
             else {
              pixel.setPixelColor(led, 255, 0, 0);
            }
           }
          else {
            pixel.setPixelColor(led, 255, 255,   255);
          }

          break;

        default:
          //display   colors defined in color array
          pixel.setPixelColor(led, Wheel(colors[displaycolor][i]));
       }   //END SWITCH
    }
    else {
      //Light off leds
      pixel.setPixelColor(led, pixel.Color(0, 0, 0));
    }
  }
}

//================================================================
// Calculate a led number by x,y coordinates
// valid for WS2812B with serpentine layout placed in horizzontal
// and zero led at bottom right (DIN connector on   the right side)
// input value: x= 0 to xres-1 , y= 0 to yres-1
// return   a led number from 0 to NUM_LED
//================================================================

int GetLedFromMatrix(byte x, byte y) {
  // For Wokwi LED Martix
  int led;
  led = xres * (yres - y - 1) + (xres - x - 1); 
  return constrain(led, 0, NUM_LEDS);
}

int GetLedFromMatrixWS812B(byte x, byte y) {
  // For 32x8 WS2812B Panel Screen
  int led;

  led = xres * (yres - y - 1); 
  
  if (y & 0x01) {
    //Odd rows (as denoted by y) increase backwards by x
    led = led + (xres - x - 1);
  }
  else {
    //Even rows (as denoted by y) increase x
    led = led + x;
  }
  return constrain(led, 0, NUM_LEDS);
}

int GetLedFromMatrixOriginal(byte x, byte y) {
  int led;
  x = xres - x - 1;
  if   (x & 0x01) {
    //Odd columns increase backwards
    led = ((x + 1) * yres - y - 1 );
  }
  else {
    //Even columns increase normally
    led = ((x + 1) * yres - yres + y);
  }
  return constrain(led, 0, NUM_LEDS);
}

//================================================================

void colorChange() {
  int reading = digitalRead(colorPIN);
  if (reading == HIGH   && previousState == LOW && millis() - lastDebounceTime > debounceDelay) {
    displaycolor++;
    if (displaycolor > 7) displaycolor = 0;
    showSettings(1, true); //set   to false if you don't want this
    saveConfig();
    lastDebounceTime = millis();
   }
  previousState = reading;
}

void brightnessChange() {
  int reading = digitalRead(brightnessPIN);
  if (reading == HIGH && previousState == LOW && millis() - lastDebounceTime > debounceDelay) {
    brightness++;
     if (brightness > 7) brightness = 0;
    pixel.setBrightness(brightness * 24 + 8);
    showSettings(2, true); //set to false if you don't want this
     saveConfig();
    lastDebounceTime = millis();
  }
  previousState   = reading;
}

// Utility from Adafruit Neopixel demo sketch
// Input   a value 0 to 255 to get a color value.
// The colours are a transition R - G   - B - back to R.
unsigned long Wheel(byte WheelPos) {
  WheelPos = 255 - WheelPos;
   if (WheelPos < 85) {
    return pixel.Color(255 - WheelPos * 3, 0, WheelPos   * 3);
  }
  if (WheelPos < 170) {
    WheelPos -= 85;
    return pixel.Color(0, WheelPos * 3, 255 - WheelPos * 3);
  }
  WheelPos -= 170;
  return pixel.Color(WheelPos * 3, 255 - WheelPos * 3, 0);
}

// load whats in EEPROM in to the local   CONFIGURATION if it is a valid setting
int loadConfig() {
  if (EEPROM.read(CONFIG_START + 0) == CONFIG_VERSION[0] &&
      EEPROM.read(CONFIG_START + 1) == CONFIG_VERSION[1] &&
      EEPROM.read(CONFIG_START + 2) == CONFIG_VERSION[2] &&
      EEPROM.read(CONFIG_START + 3) == CONFIG_VERSION[3] &&
      EEPROM.read(CONFIG_START + 4) == CONFIG_VERSION[4]) {

    // load (overwrite) the local configuration struct
    for (unsigned   int i = 0; i < sizeof(CONFIGURATION); i++) {
      *((char*)&CONFIGURATION +  i) = EEPROM.read(CONFIG_START + i);
    }
    return 1; // return 1 if config   loaded
  }
  return 0; // return 0 if config NOT loaded
}

// save   the CONFIGURATION in to EEPROM
void saveConfig() {
  CONFIGURATION.displaycolor = displaycolor;
  CONFIGURATION.brightness = brightness;
  for (unsigned int   i = 0; i < sizeof(CONFIGURATION); i++)
    EEPROM.write(CONFIG_START + i, *((char*)&CONFIGURATION + i));
}

// 1 display color level, 2 display brightness level, 3 both
void showSettings(byte num, bool show) {
  if (show) {
    pixel.clear();
    if (num == 1 || num == 3) {
      drawChar(0, 1);
      drawChar(displaycolor + 1, 6);
    }
    if (num == 2 || num == 3) {
      drawChar(9, xres - 11);
      drawChar(brightness + 1 , xres - 5);
    }
    delay(1000);
    pixel.clear();
  }
}

// Draw custom chars
void drawChar(byte val, byte pos) {
  for (int x = 4; x >= 0; x--) {
    for (int y = 5; y >=  0; y--) {
      if ((charBitmap[val * 6 + 5 - y] >> x) & 0x01) {
        pixel.setPixelColor(GetLedFromMatrix(4 - x + pos, yres - (y + 2)), Wheel((pos > 10) * 170));
        pixel.show();
      }
     }
  }
}
//by Janux®, Last version on 28/06/2020.