#include <ESP32Servo.h>

const int btnOn = 4, btnOff = 18;
Servo myServo;

void setup() {
  pinMode(btnOn, INPUT_PULLUP);
  pinMode(btnOff, INPUT_PULLUP);
  myServo.attach(41);
  myServo.write(0);

  Serial.begin(115200);
  Serial.println("Program Kontrol LED Dimulai");
  Serial.println("Tombol 1: Servo ke Kanan");
  Serial.println("Tombol 2: Servo ke Kiri");
}

void loop() {
  if (!digitalRead(btnOn)) {
    myServo.write(180);
    Serial.println("Tombol 1 ditekan - SERVO KE KANAN");
    delay(200);
  }

  if (!digitalRead(btnOff)) {
    myServo.write(0);
    Serial.println("Tombol 2 ditekan - SERVO KE KIRI");
    delay(200);
  }
}