#include <ESP32Servo.h>

#define LED_PIN 25
#define SERVO_PIN 18

Servo meuServo;

void setup() {
  // put your setup code here, to run once:
  Serial.begin(115200);
  //Serial.println("Hello, ESP32!");
  pinMode(LED_PIN, OUTPUT);
  meuServo.attach(SERVO_PIN);
  meuServo.write(0);
  Serial.println("[ESP32] Led e servo foram iniciados");
}

void loop() {
  digitalWrite(LED_PIN, HIGH);
  meuServo.write(0);
  delay(1000);
  digitalWrite(LED_PIN, LOW);
  meuServo.write(180);
  delay(1000);
}