# This demos I2C displays on the no-code platform Adafruit IO,
# running the open-source WipperSnapper arduino firmware

Goto https://io.adafruit.com/devices/new/feather-esp32/web/step-3
Enter Wokwi-GUEST as wifi network name (SSID),
and leave the password empty. Proceed to the next step (get firmware).
Use the link in the Alert box for the Offline firmware file.
Generate and download the firmware file.
Come back to Wokwi, click inside a code window and press F1.
A menu should appear, type UF and pick Upload Firmware And Start Simulation,
select the .bin firmware file downloaded, the live diagram.json will be used.

Upon booting the device, the Adafruit IO page needs to be open,
to receive the registration request.
The device disconnects regularly, due to missing the ping timing,
this is not a problem as it reconnects, but can be aided by keeping
the wokwi tab visible (have half the screen) to ensure it keeps running.

Use the New Component button on IO Device page, add OLED 128x64, and then send something

For easier support of this board in WipperSnapper, a definition could be added (pins + doc link)