/**
  ******************************************************************************
  * @file	: 09_TmVdblMPBttn_1e.ino
  * @brief  : Example for the ButtonToSwitch_ESP32 library TmVdblMPBttn class
  *
  * Repository: https://github.com/GabyGold67/ButtonToSwitch_ESP32
  * WOKWI simulation URL: https://wokwi.com/projects/437900562038179841
  * 
  * Framework: Arduino
  * Platform: ESP32
  * 
  * @details The example instantiates a TmVdblMPBttn object using:
  * 	- 1 push button between GND and dmpbSwitchPin
  * 	- 1 led with it's corresponding resistor between GND and dmpbLoadPin
  * 	- 1 led with it's corresponding resistor between GND and dmpbIsDisabledPin
  * 	- 1 led with it's corresponding resistor between GND and dmpbTskWhlOnPin
  * 	- 1 led with it's corresponding resistor between GND and dmpbFnWhnTrnOnOffPin
  *
  * - This example creates three tasks and deletes the default `loopTask` task
  * - This example creates two dedicated functions
  * - This example creates a software timer
  *
  * The "Main control task" is created in the regular setup() and then that 
  * arduino standard `loopTask` is deleted in the loop()
  * 
  * In the main control task the TmVdblMPBttn object is instantiated and configured
  * as usual, including a task to be unblocked when the isOn state changes by using
  * `dmpbBttn.setTaskToNotify(dmpsOutputTskHdl)`. The second task is also created
  * in the main control task, as is created the software timer that controls the 
  * isEnabled state.
  * 
  * When a change in the object's outputs attribute flags values is detected, the
  * task that manages the loads and resources that the switch turns On and Off is 
  * unblocked, with the provision of the MPB state passed as a 32-bits argument.
  * The task then takes care of updating the GPIO outputs.
  *
  * - The third task is created, started and blocked, like the second, it's 
  * purpose is to execute while the MPB is in "isOn state". 
  * Please read the library documentation regarding the consequences of executing
  * a task that is resumed and paused externally and without previous notification
  * to let the task to be paused in an orderly manner!!
  * 
  * The software timer created periodically toggles the isEnabled attribute flag
  * value, showing the behavior of the instantiated object when enabled and when
  * disabled.
  *
  * - The first functions is to be executed when the MPB enters the "isOn state", please refer to the
  * **setFnWhnTrnOnPtr()** method for details.
  *
  * - The second functions is to be executed when the MPB enters the "isOff state", please refer to the
  * **setFnWhnTrnOffPtr()** method for details.
  *
  * @author	: Gabriel D. Goldman
  * mail <[email protected]>
  * Github <https://github.com/GabyGold67>
  *
  * @date	: 	01/08/2023 First release
  * 			   23/09/2024 Last update
  *
  ******************************************************************************
  * @warning **Use of this library is under your own responsibility**
  * 
  * @warning The use of this library falls in the category described by The Alan 
  * Parsons Project (c) 1980 "Games People play" disclaimer:  
  * Games people play, you take it or you leave it  
  * Things that they say aren't alright  
  * If I promised you the moon and the stars, would you believe it?  
  * 
  * Released into the public domain in accordance with "GPL-3.0-or-later" license terms.
  ******************************************************************************
  */
#include <Arduino.h>
#include <ButtonToSwitch_ESP32.h>

const uint8_t dmpbFnWhnTrnOnOffPin{GPIO_NUM_4};

//===============================>> User Functions Prototypes BEGIN
void swpEnableCb(TimerHandle_t pvParam);
void Error_Handler();

void mainCtrlTsk(void *pvParameters);
void dmpsOutputTsk(void *pvParameters);
void dmpsActWhlOnTsk(void *pvParameters);
void fnExecTrnOn();
void fnExecTrnOff();

//===============================>> User Functions Prototypes END

//===============================>> User Tasks & Timers related declarations BEGIN
TaskHandle_t mainCtrlTskHndl {NULL};
TaskHandle_t dmpsOutputTskHdl;
TaskHandle_t dmpsActWhlOnTskHndl;
BaseType_t xReturned;

TimerHandle_t enableSwpTmrHndl{NULL};
//===============================>> User Tasks & Timers related declarations END

void setup() {
   pinMode(dmpbFnWhnTrnOnOffPin, OUTPUT);

  //Create the Main control task to keep, the MPBs outputs updated and set the Callback task function
   xReturned = xTaskCreatePinnedToCore(
      mainCtrlTsk,  //Callback function/task to be called
      "MainControlTask",  //Name of the task
      1716,   //Stack size (in bytes in ESP32, words in FreeRTOS), the minimum value is in the config file, for this is 768 bytes
      NULL,  //Pointer to the parameters for the function to work with
      configTIMER_TASK_PRIORITY,  //Priority level given to the task: use the same as the Software Timers priority level      
      &mainCtrlTskHndl, //Task handle
      xPortGetCoreID() //Run in the App Core if it's a dual core mcu (ESP-FreeRTOS specific)
   );
   if(xReturned != pdPASS)
      Error_Handler();
}

void loop() {
   vTaskDelete(NULL);
}  

//===============================>> User Tasks Implementations BEGIN
void mainCtrlTsk(void *pvParameters){
   const uint8_t dmpbSwitchPin{GPIO_NUM_25};

   TmVdblMPBttn dmpbBttn (dmpbSwitchPin, 3000, true, true, 50, 50, false);
   VdblMPBttn* dmpbBttnPtr {&dmpbBttn};

  //Create the task to keep the GPIO outputs updated to reflect the MPBs states
   xReturned = xTaskCreatePinnedToCore(
      dmpsOutputTsk,  //Callback function/task to be called
      "SwitchOutputsControlTask",  //Name of the task
      1716,   //Stack size (in bytes in ESP32, words in FreeRTOS), the minimum value is in the config file, for this is 768 bytes
      NULL,  //Pointer to the parameters for the function to work with
      configTIMER_TASK_PRIORITY,  //Priority level given to the task: use the same as the Software Timers priority level      
      &dmpsOutputTskHdl, //Task handle
      xPortGetCoreID() //Run in the App Core if it's a dual core mcu (ESP-FreeRTOS specific)
   );
   if(xReturned != pdPASS)
      Error_Handler();

  //Create the task to resume every time the the MPB enters the On state and blocks when enters the Off state
   xReturned = xTaskCreatePinnedToCore(
      dmpsActWhlOnTsk,  //Callback function/task to be called
      "ExecWhileOnTask",  //Name of the task
      1024,   //Stack size (in bytes in ESP32, words in FreeRTOS), the minimum value is in the config file, for this is 768 bytes
      NULL,  //Pointer to the parameters for the function to work with
      configTIMER_TASK_PRIORITY,  //Priority level given to the task: use the same as the Software Timers priority level      
      &dmpsActWhlOnTskHndl, //Task handle
      xPortGetCoreID() //Run in the App Core if it's a dual core mcu (ESP-FreeRTOS specific)
   );
   if(xReturned != pdPASS)
      Error_Handler();
   vTaskSuspend(dmpsActWhlOnTskHndl);

   //Create the timer to keep the isEnabled state of the MPB changing to see the effects over the MPBs behavior
   enableSwpTmrHndl = xTimerCreate(
      "isEnabledSwapTimer",
      15000,
      pdTRUE,
      dmpbBttnPtr,
      swpEnableCb
   );
   if (enableSwpTmrHndl != NULL)
      xReturned = xTimerStart(enableSwpTmrHndl, portMAX_DELAY);
	if(xReturned == pdFAIL)
      Error_Handler();
   
   dmpbBttn.setIsOnDisabled(false);
   dmpbBttn.setTaskToNotify(dmpsOutputTskHdl);
   dmpbBttn.setTaskWhileOn(dmpsActWhlOnTskHndl);
   dmpbBttn.setFnWhnTrnOnPtr(&fnExecTrnOn);
   dmpbBttn.setFnWhnTrnOffPtr(&fnExecTrnOff);
   dmpbBttn.begin();

   for(;;){
      /* 
      Any  code can be placed here to execute while the MPBs are monitored 
      by the timer, and any output change will be responded by the dmpsOutputTsk
      */
   }
}

void dmpsOutputTsk(void *pvParameters){
   const uint8_t dmpbLoadPin{GPIO_NUM_21};
   const uint8_t tvLoadPin{GPIO_NUM_18};
   const uint8_t dmpbIsDisabledPin{GPIO_NUM_19};

   pinMode(dmpbLoadPin, OUTPUT);
   pinMode(tvLoadPin, OUTPUT);
   pinMode(dmpbIsDisabledPin, OUTPUT);

   uint32_t mpbSttsRcvd{0};
	MpbOtpts_t mpbCurStateDcdd;

   for(;;){
		xReturned = xTaskNotifyWait(
         0x00,	//uint32_t ulBitsToClearOnEntry
         0xFFFFFFFF,	//uint32_t ulBitsToClearOnExit,
         &mpbSttsRcvd,	// uint32_t *pulNotificationValue,
         portMAX_DELAY//TickType_t xTicksToWait
		);
      if (xReturned != pdPASS)
         Error_Handler();

		mpbCurStateDcdd = otptsSttsUnpkg(mpbSttsRcvd);
      digitalWrite(dmpbLoadPin, (mpbCurStateDcdd.isOn)?HIGH:LOW);
      digitalWrite(tvLoadPin, (mpbCurStateDcdd.isVoided)?HIGH:LOW);
      digitalWrite(dmpbIsDisabledPin, (mpbCurStateDcdd.isEnabled)?LOW:HIGH);
   }
}

void dmpsActWhlOnTsk(void *pvParameters){
   const uint8_t dmpbTskWhlOnPin{GPIO_NUM_16};
   
   pinMode(dmpbTskWhlOnPin, OUTPUT);

	const unsigned long int swapTimeMs{500};
	unsigned long int strtTime{0};
	unsigned long int curTime{0};
	unsigned long int elapTime{0};
	bool blinkOn {false};

	strtTime = xTaskGetTickCount() / portTICK_RATE_MS;
	for(;;){
		curTime = (xTaskGetTickCount() / portTICK_RATE_MS);
		if ((curTime - strtTime) > swapTimeMs){
			blinkOn = !blinkOn;
         digitalWrite(dmpbTskWhlOnPin, blinkOn?HIGH:LOW);
			strtTime = curTime;
		}
	}
}
//===============================>> User Tasks Implementations END

//===============================>> User Timers Implementations BEGIN
/**
 * @brief Timer callback function
 * 
 * @param pvParam The callback function argument.
 * In this case is a pointer to the MPB object to be enabled and disabled periodically. 
 * It's a DbncdMPBttn* as enable() and disable() are dynamic polymorphic so they can be invoked through a base class pointer call.
 */
void swpEnableCb(TimerHandle_t pvParam){
  DbncdMPBttn* dbncdMPBLocPtr = (DbncdMPBttn*) pvTimerGetTimerID(pvParam);

  if (dbncdMPBLocPtr->getIsEnabled())
    dbncdMPBLocPtr->disable();
  else
    dbncdMPBLocPtr->enable();

  return;
}
//===============================>> User Timers Implementations END

//===============================>> User Functions Implementations BEGIN
void fnExecTrnOn(){
   /*If the execution of the function resets the MCU the reason might be the 
   long execution time the function is taking, in that case delete the following
   code inside the function and uncomment the last now commented line, the same for the 
   fnExecTrnOff()
   */
	const unsigned long int swapTimeMs{100000};
	unsigned long int strtTime{0};
	unsigned long int curTime{0};
	bool blinkOn {false};
   int blinks{0};

	strtTime = micros();
	while (blinks < 2){
		curTime = micros();
		if ((curTime - strtTime) > swapTimeMs){
			blinkOn = !blinkOn;
         digitalWrite(dmpbFnWhnTrnOnOffPin, blinkOn?HIGH:LOW);
			strtTime = curTime;
         ++blinks;
		}
	}
   
   // digitalWrite(dmpbFnWhnTrnOnOffPin, HIGH); 

   return;
}

void fnExecTrnOff(){
   /*If the execution of the function resets the MCU the reason might be the 
   long execution time the function is taking, in that case delete the following
   code inside the function and uncomment the last now commented line, the same for the 
   fnExecTrnOn()
   */
	const unsigned long int swapTimeMs{50000};
	unsigned long int strtTime{0};
	unsigned long int curTime{0};
	bool blinkOn {false};
   int blinks{0};

	strtTime = micros();
	while (blinks < 4){
		curTime = micros();
		if ((curTime - strtTime) > swapTimeMs){
			blinkOn = !blinkOn;
         digitalWrite(dmpbFnWhnTrnOnOffPin, blinkOn?HIGH:LOW);
			strtTime = curTime;
         ++blinks;
		}
	}

   // digitalWrite(dmpbFnWhnTrnOnOffPin, LOW);

   return;
}

/**
 * @brief Error Handling function
 * 
 * Placeholder for a Error Handling function, in case of an error the execution
 * will be trapped in this endless loop
 */
void Error_Handler(){
  for(;;)
  {    
  }
  
  return;
}
//===============================>> User Functions Implementations END